
*Concentration Distribution Evolution of Injected Medications in the Blood Stream of a Beating Human Heart (with Abdoli, A., Zeidi, S.M.J.), paper ASME IMECE201771169, Tampa, FL,, Nov. 39, 2017.

*High Power – High Frequency ElectroMagnetoHydroDynamics and Heat Transfer (with Zeidi, S.M.J., Abdoli, A., Reddy, S.R.), paper ASME IMECE201770221, Tampa, FL,, Nov. 39, 2017.

*Bladelets – Winglets on Blades of Wind Turbines: A Design Optimization Study (with Reddy, S.R., Sobieczky, H.), paper ASME IMECE70220, Tampa, FL,, Nov. 39, 2017.

Materials Processing Control Using Electric and Magnetic Fields, (with Colaco, M.J., Dennis, B.H., Reddy, S.R.),

Plenary Lecture
, paper ASME IMECE201771221, Tampa, FL,, Nov. 39, 2017.

*An Effective Parameter Screening Strategy for High Dimensional Models (with Chitale, J., Khare, Y., MunozCarpena, R., Martinez, C.), paper ASME IMECE201771458,<, Tampa, FL,, Nov. 39, 2017.

Methods for Identification of a Large Number of Parameters Using Response Surfaces and Hybrid Optimizers (with Reddy, S.R., Colaco, M.J.), New Trends in Parameter Identification for Mathematical Models, Rio de Janeiro, Brazil., Oct. 30 – Nov. 3, 2017.

*Reduced Order Model for Fluid Flow and Transport of Passive Scalars in Fluidized Beds (with Reddy, S.R., Cizmas, P.G.A., Gokaltun, S., McDaniel, D., Chitale, J.),Coupled Problems 2017, Rhodos Island, Greece, , June 1214, 2017.

*A Comprehensive Parametric Study of the Effect of Cavitation Formation Inside Fuel Injector Nozzle With Different Needle Seat Shapes (with Zeidi, S.M.J.), AIAA Aviation and Aeronautics Forum and Exposition, Denver, CO., June 59, 2017.

*Analysis of Anisotropic Graphene Platelet Heat Spreaders to Reduce Hot Spot Temperature and Temperature NonUniformity (with Reddy, S.R., Rotterman, Y.), IEEE ITherm 2017, Orlando, Florida, USA., May 30June 2, 2017.

*Inverse Determination of Spatially Varying Thermal Capacity and Thermal Conductivity in Arbitrary 2D Objects (with Reddy, S.R, Zeidi, S.M.J.), CHT17, Naples, Italy,, May 28June 1, 2017.

*Effects of Needle Lift and Fuel Type on Cavitation Formation and Heat Transfer Inside Diesel Fuel Injector Nozzle (with Zeidi, S.M.J., Reddy, S.R., Darvish, S.), CHT17, Naples, Italy,, May 28June 1, 2017.

*Conjugate Cooling Protocols for Human Hearts Including Major Blood Vessels (with Abdoli, A., Zeidi, S.M.J.), CMBE2017, Pittsburgh, PA, , April 1012, 2017.

Multifunctional Organically Modified Silica Nanoparticles for Image Guided Chemotherapy with Ondemand Drug Release and Deep Tumor Drug Delivery Properties (with Nagessetti, A., McGoron, A.), WMIC2016 – The 9th Annual Meeting for the World Molecular Imaging Congress, New York, NY, , September 710, 2016.

*State Estimation Problems in PRFShift Magnetic Resonance Thermometry (with Pacheco, C.C., Orlande, H.R.B., Colaco, M.J.), Fourth International Conference on Computational Methods for Thermal Problems – ThermaComp2016 (eds.: Massarotti, N., Nithiarasu, P., Joshi, Y.), Georgia Tech, Atlanta, GA,, July 68, 2016.

*Microscopic Characterization of CuNirich Bridges in Alnico Alloys (with M. Fan, Y.Liu, R. Jha, J. Schwartz, C.C. Koch), 13th Joint MMMIntermag Conference, San Diego, California, U.S.A., January, 11 – 15, 2016.

*Design and Optimization of RareEarth Free Hard Magnetic Alloys and NickelBased Superalloys for High Temperatures Applications (with Jha, R., Colaco, M.J.), COBEM2015, paper 1284, Rio de Janeiro, Brazil, December 611, 2015.

*Identification of Material Properties Through a Markov Chain Monte Carlo Technique and a Response Surface Approach (with Pacheco, C., Vesenjak, M., Borovinsek, M., Jha, R., Reddy, S., Orlande, H., Colaço, M.), COBEM2015, paper 0584, Rio de Janeiro, Brazil, December 611, 2015.

*Conjugate Analysis of Thin Film Heat Spreaders to Reduce Temperature at Hot Spots (with Reddy, S., Abdoli, A., Jha, R.), ASME IMECE, paper 52804, Houston, TX, November 1319, 2015.

*Multiobjective Optimization of MicroPinFin Arrays for Cooling of High Heat Flux Electronics (with Reddy, S.), ASME IMECE, paper 54166, Houston, TX, November 1319, 2015.

Silica Nanoparticle Transport in Simulated Tumor Microenvironments: The Role of Surface Functionalization and Cellular Autophagy (with Nagesetti, A., Estumano, D., Orlande, H.R.B., Colaco, M.J., McGoron, A.), BMES2015, Tampa, FL, October 710, 2015.

*Inverse Determination of Spatial Variation of Diffusion Coefficients in Arbitrary Objects Creating Desired NonIsotropy of Field Variables (with Reddy, S.R., Colaco, M.J., Orlande, H.R.B.), MS&T15Materials science and Technology 2015 Conference, Columbus, Ohio, October 48, 2015.

*MultiObjective Design and Optimization of Hard Magnetic Alloys Free of Rare Earths (with R. Jha, M.J. Colaco, I.N. Egorov, C. Poloni, N. Chakraborti, M. Fan, J. Schwartz, C.C. Koch), MS&T15Materials science and Technology 2015 Conference, Columbus, Ohio, October 48, 2015.

*MultiObjective Optimization of MicroPin Fin Arrays for Cooling of High Heat Flux Electronics with a Hot Spot (with Reddy, S.R., Abdoli, A., Pacheco, C.C., Vasquez, G., Jha, R., Colaco, M.J., Orlande, H.R.B.), paper InterPACKICNMM201548242, San Francisco, CA, July 69, 2015.

*Inverse Design of Cooling of Electronic Chips Subject to Specified Hot Spot Temperature and Coolant Inlet Temperature (with Reddy, S.R.), paper InterPACKICNMM201548346, San Francisco, CA, July 69, 2015.

Magnetic Alloys Design Using MultiObjective Optimization (with R. Jha, M.J. Colaco, M. Fan, J. Schwartz, C.C. Koch), ACEX20159th International Conference on Advanced Computational Engineering and Experimenting, Munich, Germany, June 29 – July 2, 2015.

Algorithms for multiobjective design optimization of hard magnetic alloys using experimental data (with Jha, R., Chakraborti, N., Fan, M., Schwartz, J., Koch, C., Colaco, M.J.), ICMM4International Conference on Materials Modeling, May 2729 (2015), Berkeley, CA.

Inverse Parameter Identification Using Bayesian Statistics and Response Surfaces (with Pacheco, C.C., Vesenjak, M., Borovinšek, M., Jha, R., Reddy, S.R., Orlande, H.R.B., and Colaço, M.J.), ICMM4International Conference on Materials Modeling, May 2729 (2015) Berkeley, CA.

*MultiWinglets: Multiobjective Optimization of Aerodynamic Shapes (with Reddy, S., Sobieczky, H., Abdoli, A.,), paper AIAA20151489, 53rd AIAA Aerospace Sciences Meeting, Kissimmee, FL, January 59, 2015.

Estimation of a Position and a Time Dependent High Magnitude Heat Flux Using the Kalman Filter (with Pacheco, C.C., Orlande, H.R.B., Colaco, M.J., da Fonseca, R.M.), 15th Brazilian Congress of Thermal Sciences and EngineeringENCIT2014, Belem, PA, Brazil, November 1013, 2014.

Simulation of Cooling Preservation Systems for Human Hearts Destined for Transplantation (with Abdoli, A., Bajaj, C., Stowe, D.F., Jahania, M.S.), BMES2014, San Antonio, TX, October 2225, 2014.

*The Effect of Surface Functionalization and Temperature on Nanoparticle Penetration into Tumor Spheroids (with Nagesetti, A., Estumano, D., Orlande, H.R.B., Colaco, M.J., McGoron, A.), BMES2014, San Antonio, TX, October 2225, 2014.

Bayesian Estimate of Mass Fraction of Burned Fuel in Internal Combustion Engines using Pressure Measurements (with Estumano, D.C., Hamilton, F.C., Colaco, M.J., Leiroz, A.J.K., Orlande, H.R.B., Carvalho, R.N.), EngOpt2014, (eds: Rodrigues, H.C., Herskovits, J., Mota Soares, C.M., Guedes, J.M., Araujo, A.L., Folgado, J.O., Moleiro, F., Madeira, J.F.A.), Lisbon, Portugal, Sept. 811, 2014, pp. 9971003.

A combined computationalexperimental approach to design of highintensity permanent magnetic alloys (with Jha, R., Fan, M., Schwartz, J., Koch, C., Egorov, I.N., Poloni, C.,), CONEM2014 National Conference of Mechanical Engineering, August 1015 (2014), Uberlandia, Brazil).

Identification of Unsteady Location and Intensity a Heat Flux Using Kalman Filter and Improved Lumped Analysis in 3D Heat Conduction (with Pacheco, C.C., Orlande, H.R.B., Colaço, M.J.), 5th International Conference on Computational Methods – ICCM), Cambridge, UK, July 2830, 2014.

*A Comparison of Particle Filters Applied to the Heat Transfer Coefficient Estimation in Internal Combustion Engines (with Estumano, D.C., Hamilton, F.C., Colaco, M.J., Leiroz, A.J.K., Carvalho, R.N., Orlande, H.R.B.), 11th World Congress of Computational Mechanics – WCCM XI, Barcelona, Spain, July 2025, 2014.

*Winglets – Multiobjective Optimization of Aerodynamic Shapes (with Reddy, S, Sobieczky, H., Abdoli, A.), 11th World Congress of Computational Mechanics – WCCM XI, Barcelona, Spain, July 2025, 2014.

*Bayesian Estimation of Parameters in HodgkinHuxley’s Model of Biomedical Electric Signals (with Estumano, D. C., Orlande, H.R.B., Colaco, M.J., Ritto, T.G., Riera Diaz, J.J.), Uncertainties2014 – 2nd International Symposium on Uncertainty Quantification and Stochastic Modeling, Rouen, France, July 711, 2014.

MultiDisciplinary Analysis of Cooling Protocols for Human Heart Destined for Transplantation (with Abdoli, A., Bajaj, C., Stowe, D. F., Jahania, M. S.), Invited Lecture, ThermaComp2014 – Third International Conference on Computational Methods for Thermal Problems (eds: N. Massarotti, P. Nithiarasu, B. Sarler), Bled, Slovenia, June 24, 2014.

ThermoFluidStress Analysis of TwoLayer Microchannels for Cooling Chips With Hot Spots (with Abdoli, A., Vasquez, G., Rastkar, S.), ThermaComp2014 – Third International Conference on Computational Methods for Thermal Problems (eds: N. Massarotti, P. Nithiarasu, B. Sarler), Bled, Slovenia, June 24, 2014.

*Inverse Determination of Spatially Varying Diffusion Coefficient in TwoDimensional Objects (with Pasqualette, M.A, Colaco, M.J. and Orlande, H.R.B.), 7th International Conference “Inverse Problems: Modeling & Simulation”, Oludeniz, Fethiye, Turkey, May 2631, 2014.

*A Combined ExperimentalComputational Approach to Design Optimization of High Temperature Alloys (with Jha, R., Pettersson, F., Saxen, H., Chakraborti, N.), paper no. ETS20141008, ASME Symposium on Elevated Temperature Application of Materials for Fossil, Nuclear, and Petrochemical Industries, Seattle, WA, March 2527, 2014.

Bayesian Particle Filters Applied to Heat Transfer and Biomedical Problems (with Colaco, M.J., Orlande, H.R.B., Silva, W.S., Estumano, D.C., Hamilton, F.C., Leiroz, A.J.K. and Carvalho, R.N.), 5^{th} AsiaPacific Congress on Computational Mechanics – APCOM2013, Singapore, December 1114, 2013.

Optimized MultiFloor Throughflow Micro Heat Exchangers (with Abdoli, A.), paper IMECE201363590, ASME IMECE, San Diego, CA, November 1521, 2013.

*Hybrid Optimization Algorithms and Hybrid Response Surfaces (with Colaco, M.J.), Plenary Lecture, Eurogen2013, Las Palmas de Gran Canaria, Spain, October 79, 2013.

*MultiObjective Design Optimization of MultiFloor, Branching, Micro Heat Exchangers (with Abdoli, A.), paper HT201317738, ASME Summer Heat Transfer Conference, Minneapolis, MN, July 1419, 2013.

Inverse Determination of Spatially Varying Thermal Conductivity in TwoDimensional Objects (with Pasqualette, M.A., Colaco, M.J., Orlande, H.R.B., Martin, T.J.), Symposium on Inverse Problems, Design and OptimizationIPDO2013, (eds.: Fudym, O., Battaglia, J.L.), Albi, France, June 2628, 2013.

Modern Optimization Algorithms and Particle Swarm Variations (with Inclan, E.J., Yang, X.S.), Symposium on Inverse Problems, Design and OptimizationIPDO2013, (eds.: Fudym, O., Battaglia, J.L.), Albi, France, June 2628, 2013.

*Effective Modifications to Differential Evolution Optimization Algorithm (with Inclan, E.), International Conference on Computational Methods for Coupled Problem in Science and Engineering, (eds.: Idelsohn, S., Papadrakakis, M., Schrefler, B.), Santa Eulalia, Ibiza, Spain, June 1719, 2013.

*A Hybrid Optimization Algorithm with Search Vector Based Automatic Switching (with Inclan, E.J.), World Congress of Multidisciplinary Optimization, (eds.: Kim, N.H., Haftka, R.), Orlando, FL, May 1519, 2013.

Certain Specifics of NanoModeling of Various Rheologically Complex Fluids (with Sattarov, R. M., Kurbanbaev, M.I., Sattarzade, I, R., Abitova, A. Zh., Nugiev, M.A. and Muhambetov, B. T.), Khazarneftgazyatag2012 Scientific Practical Conference, Baku, Azerbaijan, Dec. 45, 2012.

Inverse Determination of 3D Shapes in Field Problems, Plenary Lecture, International Conference on Inverse Problems and Related Topics, Southeast University, Nanjing, China, October 2126, 2012.

Inverse Heat Transfer Problems and their Solutions within the Bayesian Framework (with Orlande, H.R.B.), ECCOMAS Special Interest Conference – Numerical Heat Transfer 2012 (eds: Nowak, A. and Bialecki, R.A.), GliwiceWroclaw, Poland, September 46, 2012.

Fast Bayesian Inference for an Inverse Heat Transfer Problem Using Approximations (with Neumayer, M., Watzenig, D., Orlande, H. R. B., Colaco, M. J.), Article no. 6229538, pp. 19231928, 2012 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2012, Graz, Austria, May 1216, 2012.

*Application of a Bayesian Filter to Estimate Unknown Heat Fluxes in a Natural Convection Problem (with Colaco, M. J., Orlande, H. R. B. and da Silva, W. B.), Best Paper Award by AMS Technical Committee, ASME paper DETC201147652, Symposium at the 2011 ASME International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), Vol. 2, Parts A and B, pp, 425434 (eds. Dennis, B. H., Dulikravich, G. S., Michopoulos, J. and Kumar, A. V.), Washington, DC, August 2831, 2011.

Estimation of Drying Parameters Including Moisture Diffusivity by Using Temperature Measurements (with Kanevce, G. H., Kanevce, Lj. P., Mitrevski, V. B.), 15^{th}International Conference on Computational Methods and Experimental Measurements – CMEM2011, Vol. 51, pp. 111119, New Forest, UK, May 31June 6, 2011.

A Fourier Series Method for Solving Ordinary Differential Equations with NonConstant Coefficients Arising in Inverse Shape Design (with Baker, D. P.), (eds: Kassab, A. J. and Divo, E. A.), International Conference on Inverse Problems in Engineering – ICIPE2011, Orlando, FL, May 46, 2011, pp. 275280.

*Design of Molecules for Pareto Optimum Functionalities (with Bhargava, S.),Keynote Lecture, IPDO2010Inverse Problems, Design and Optimization Symposium, Joao Pessoa, Brazil, August 2527, 2010.

*Temperature Field Prediction of a Multilayered Composite Pipeline Based on the Particle Filter Method (with Vianna, F. and Orlande, H.R.B.), paper IHTC1422462, 14th International Heat Transfer Conference – IHTC, Washington, D.C., August 713, 2010

*Optimization of 3D Branching Networks of Microchannels for Microelectronic Device Cooling (with Martin, T. J.), paper IHTC1422719, 14th International Heat Transfer Conference – IHTC, Washington, D.C., August 713, 2010.

Optimization of Cooling Protocols for Living Organs, Invited Lecture, Panel on Bioheat Transfer (org: Kahlen, F.J.), 14th International Heat Transfer Conference – IHTC, Washington, D.C., August 713, 2010.

Inverse Design of Alloys for Specified ThermoMechanical Properties by Using MultiObjective Optimization, Plenary Lecture, Second International Workshop on Computational Inverse Problems and Applications (ed: Wang, Y.F.), Beijing, P. R. China, July 12 – July 15, 2010.

Optimal Heating Control to Prevent Solid Deposits in Pipelines (with Vianna, F.L.V. and Orlande, H.R.B.), Fifth European Conference on Computational Fluid Dynamics – ECCOMAS CFD2010, Lisbon, Portugal, June 1417, 2010.

Design of a Heating System for Petroleum Pipelines Based on State Estimation and Optimal Control (with F. L. V. Vianna, H. R. B. Orlande), IV European Conference on Computational Mechanics, May 1621, 2010, Paris, France.

MultiObjective Optimization of Topology and Performance of Threedimensional Networks of Cooling Passages (with Ardila, R.), Keynote Lecture, Energy and Thermal Sciences Symposium at COBEM, 20th International Congress of Mechanical Engineering, Gramado, Brazil, November 1520, 2009.

Prediction of the Temperature Field in Pipelines Using Bayesian Filters and NonIntrusive Measurements (with Vianna, F. and Orlande, H. R. B.), COBEM, 20th International Congress of Mechanical Engineering, Gramado, Brazil, November 1520, 2009.

A Survey of Basic Deterministic, Heuristic and Hybrid Methods for Single Objective Optimization and Response Surface Generation (with Colaco, M. J.),FrancoBrazilian Advanced School, METTI IV – Thermal Measurements and Inverse Techniques, (ed: Orlande, H. R. B. and Fudym, O.), Angra dos Reis, RJ, Brazil, Nov. 813, 2009.

*Modified PredatorPrey (MPP) Algorithm for Constrained Multiobjective Optimization (with Chowdhury, S. and Moral, R. J.),(ed: Burczynski, T. and Periaux, J.), EUROGEN 2009, Cracow, Poland, June 1517, 2009, CIMNE, Barcelona, Spain 2009.

Modified Continuous Ant Colony Algorithm (with Aidov, A.), 2nd International Congress of Serbian Society of Mechanics, Palic (Subotica), Serbia, June 15, 2009.

Estimation of the Temperature Field in Pipelines by Using Kalman Filter (with Vianna, F., Orlande, H. R. B.), 2nd International Congress of Serbian Society of Mechanics, Palic (Subotica), Serbia, June 15, 2009.

Radial Basis Functions Applied to the Solution of the Natural Convection Problem in Square Cavities (with Magalhaes, A. C., Colaco, M. J and Orlande, H. R. B.), 12th Brazilian Congress of Thermal Engineering and Sciences, Belo Horizonte, MG, Brazil, November 1014, 2008.

Development of Digital Filters for Inverse Heat Conduction Problems (with de Sousa, P., Fernandes, A. P., Guimaraes, G.), 12th Brazilian Congress of Thermal Engineering and Sciences, Belo Horizonte, MG, Brazil, November 1014, 2008.

*A Hybrid SelfOrganizing Response Surface Methodology (with Moral, R. J.), paper AIAA20085891, 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada, September 1012, 2008.

*A Hybrid RBFBased Methods for Highly Multidimensional Response Surfaces Using Scarce Data Sets (with Colaco, M. J.), paper AIAA20085892, 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada, September 1012, 2008.

Bayesian Estimation of the Thermal Conductivity Components of Orthotropic Solids (with Orlande, H. R. B. and Colaco, M. J.), 5th Brazilian National Congress of Mechanical Engineering – CONEM, Salvador, Bahia, Brazil, August 1821, 2008.

*Identification of Parameters in a System of Differential Equations Modeling Evolution of Infectious Diseases (with Hernandez, A., Colaco, M. J. and Moral, R. J.), ASME paper DETC200849595, Symposium at the 2008 ASME International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), (eds. Dulikravich, G.S., Michopoulos, J. and Kumar, A. V.), Brooklyn, NY, August 36, 2008.

*Dynamic Observer Method Based on Modified Green’s Functions for Robust and More Stable Inverse Algorithms (with Sousa, P.F.B., Fernandes. A.P., Borges, V.L. and Guimaraes, G.), ASME paper DETC200849062, Symposium at the 2008 ASME International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), (eds. Dulikravich, G.S., Michopoulos, J. and Kumar, A. V.), Brooklyn, NY, August 36, 2008.

PredatorPrey Evolutionary MultiObjective Optimization Algorithm: Performance and Improvements (with Chowdhury, S. and Moral, R. J.), 7th conference of Association for Structural and Multidisciplinary Optimization in the UK (ed: Toropov, V. V.), Bath, U.K., July 78, 2008.

A Comparison of Accuracy and Robustness of Methods for Construction of Multidimensional Response Surfaces (with Colaco, M. J.), Minisymposium on “Metamodels for High Dimensionality Response Surfaces in Multiobjective Optimization”, 8th World Congress of Computational Mechanics, (eds: Dulikravich, G. S. and Colaco, M. J.), Venice, Italy, June 30July 5, 2008.

MagnetoHydrodynamic Simulations Using Radial Basis Functions (with Colaco, M. J.), Minisymposium on “Computational ElectroMagnetoFluidDynamics”, 8th World Congress of Computational Mechanics, (eds: Gerbeth, G., Dulikravich, G. S. and Pericleous, K.), Venice, Italy, June 30July 5, 2008.

Simulation of Channel Flows Using Thermal Lattice Boltzmann Method (with Gokaltun, S.), ICMES5th Mesoscopic Methods in Engineering and Science Conference, Amsterdam, The Netherlands, June 1620, 2008.

Application of Bayesian Filters to Heat Conduction Problems (with Orlande, H. R. B. and Colaco, M. J.), EngOpt 2008 – International Conference on Engineering Optimization, (ed: Herskovits, J.), Rio de Janeiro, Brazil, June 15, 2008.

A Response Surface Method Based Hybrid Optimizer (with Colaco, J. M.), EngOpt 2008 – International Conference on Engineering Optimization, (ed: Herskovits, J.), Rio de Janeiro, Brazil, June 15, 2008.

Inverse Estimation of Moisture Diffusivity by Utilizing Temperature Response of a Drying Body (with G. Kanevce, L. Kanevce, V. Mitrevski), ICCES’08: International Conference on Computational & Experimental Engineering and Sciences, Honolulu, Hawaii, March 1722, 2008.

Titanium Based Alloy Chemistry Optimization for Maximum Strength, Minimum Weight and Minimum Cost Using JMatPro and IOSO Software (with Kumar, A. and Egorov, I. N.), TMS Annual Meeting, Materials Informatics: Enabling Integration of Modeling and Experiments in Materials Science, ed: Rajan, K., New Orleans, LA, March 913, 2008.

Approximation of the Likelihood Function in the Bayesian Technique for the Solution of Inverse Problems (with Orlande, H.R.B. and Colaco, M.J.), International Symposium on Inverse Problems, Design and Optimization (IPDO2007), (eds.: Dulikravich, G.S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 1618, 2007

Multiobjective Nonlinear Shape Optimization of Stent Based on Evolution Principles (with Annicchiarico, W.), International Symposium on Inverse Problems, Design and Optimization (IPDO2007), (eds.: Dulikravich, G.S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 1618, 2007.

A Comparison of Two Methods for Fitting High Dimensional Response Surfaces (with Colaco, M. J. and Sahoo, D.), International Symposium on Inverse Problems, Design and Optimization (IPDO2007), (eds.: Dulikravich, G.S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 1618, 2007.

ElectroThermoHydrodynamic Control of Solidification of Binary Mixtures (with Colaco, M. J.), 9th International Symposium on Fluid Control, Measurement and Visualization – FLUCOME 2007, ed. Chen, C.Y., Florida State University, Tallahassee, FL, Sept. 1619, 2007.

Statistical Modeling of Rarefied Gas Flows in Microchannels (with Gokaltun, S., Skudarnov, P. V. and Sukop, M. C.), paper AIAA20074583, 18th AIAA Computational Fluid Dynamics Conference, Miami, FL, June 2528, 2007.

Lattice Boltzmann Method for Steady Gas Flows in Microchannels With Imposed Slip Wall Boundary Condition (with Gokaltun, S.), 5th International ASME Conference on Nanochannels, Microchannels and Minichannels (ICNMM07), Universidad de la Americas, Puebla, Mexico, June 1820, 2007.

Inverse Approaches to Drying of Sliced Foods (with Kanevce, G. H., Kanevce, Lj. P., and Mitrevski, V. B.), International Symposium on Inverse Problems, Design and Optimization (IPDO2007), (eds.: Dulikravich, G. S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 1618, 2007.

Inverse Approaches in Improvement of Air Pollution Plume Dispersion Models for Regulatory Applications (with Kanevce, G. H., Kanevce, Lj. P., and Andreevski, I. B.), International Symposium on Inverse Problems, Design and Optimization (IPDO2007), (eds.: Dulikravich, G. S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 1618, 2007.

Projectile Shape Optimization for Desired Target Damage (with Moral, J. R. and Vignjevic, R.), International Symposium on Inverse Problems, Design and Optimization (IPDO2007), (eds.: Dulikravich, G. S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 1618, 2007.

Controlling Solidification of Particle Laden Melts Using ThermoMagnetohydrodynamics and Optimization (with Colaco, M. J.), Symposium on Processing for Reliability, (ed: Mullins, W. M.), Materials Science & Technology 2006, Cincinnati, OH, October 1519, 2006.

Evolutionary Wavelet Neural Network for Large Scale Function Estimation in Optimization (with Sahoo, D.), AIAA Paper AIAA20066955, 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, VA, September 68, 2006.

MultiObjective Hybrid Evolutionary Optimization With Automatic Switching (with Moral, R. J. and Sahoo, D.), AIAA Paper AIAA20066976, 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, VA, September 68, 2006.

Inverse Approaches to Drying With and Without Shrinkage (with Kanevce, G., Kanevce, Lj., Mitrevski, V. and Orlande, H. R. B.), 15th International Drying Symposium (IDS 2006), Budapest, Hungary, August 2023, 2006.

MultiObjective Design Optimization of Topology and Performance of Fractal Branching Networks of Cooling Passages, (with Gonzalez, M. J., Moral, R. J., Sahoo, D. and Martin, T. J. M.), ASME paper ICNMM200696151, ASME Fourth International Conference on Nanochannels, Microchannels and Minichannels, (eds.: Kandlikar, S.) University of Limerick, Limerick, Ireland, June 1921, 2006.

Evolutionary Optimization of Chemistry of Bulk Metallic Glasses (with Egorov, I. N. and Jelisavcic, N.), III European Conference on Computational Solid and Structural Mechanics (eds: Mota Soares, C. A., Martins, J.A.C., Rodrigues, H.C., Ambrosio, J.A.C., Pina, C.A.B., Mota Soares, C.M., Pereira, E.R.B. and Folgado, J.), Springer, Lisbon, Portugal, June 58, 2006.

Optimizing Chemistry of Bulk Metallic Glasses for Improved Thermal Stability (with Egorov, I. N.), Symposium on Bulk Metallic Glasses, TMS 2006 Annual Meeting & Exhibition, eds: Liaw, P. K. and Buchanan, R. A., San Antonio, TX, March 1216, 2006.

Magnetohydrodynamic Optimization of the Fluid Flow During Solidification of Binary Mixtures in Enclosures (with Colaco, M. J.), 18th International Congress of Mechanical Engineering, Ouro Preto, Mato Groso, Brazil, November 611, 2005.

Design Optimization of Networks of Cooling Passages (with Jelisavcic, N., Martin, T.J., Moral, R., Sahoo, D. and Gonzalez, M.), ASME paper IMECE200579175, ASME IMECE, Orlando, FL, November 511, 2005.

Design of Alloy’s Concentrations for Optimized Strength, Temperature, TimetoRupture, Cost and Weight (with Egorov, I. N.), Sixth International Special Emphasis Symposium on Superalloys 718, 625, 706 and Derivatives, eds: Loria, E. A., TMS Publications, Pittsburgh, PA, October 25, 2005, pp. 419428.

AeroThermalElasticityMaterials Optimization of Cooled Gas Turbine Blades: Summary (with Martin, T. J., Dennis, B. H. and Egorov, I. N.), EUROGEN 05 – Evolutionary and Deterministic Methods for Design, Optimisation and Control with Applications to Industrial and Societal Problems, (eds: R. Schilling, W. Haase, J. Periaux, H. Baier, G. Bugeda), Munich, Germany, September 1214, 2005.

A MultiObjective Evolutionary Hybrid Optimizer (with Moral, R. and Sahoo, D.), EUROGEN 05 – Evolutionary and Deterministic Methods for Design, Optimisation and Control with Applications to Industrial and Societal Problems, (eds: R. Schilling, W. Haase, J. Periaux, H. Baier, G. Bugeda), Munich, Germany, September 1214, 2005.

SelfAdapting Response Surface Optimization of Alloying Elements Concentrations for Specified Strength, Temperature, TimetoRupture, Cost and Weight (with Egorov, I. N.), Advances in Computational Mechanics and Optimization: Symposium in honor of Prof. Subrata Mukherjee’s 60th birthday, 8th National Congress of Computational Mechanics, Austin, TX, July 2527, 2005.

Energetics and Dynamical Pathways of Dislocation Crossslip in Copper (with Pendurti, S., Lee, I.H., and Jun, S.), 8th National Congress of Computational Mechanics, Austin, TX, July 2527, 2005.

Estimation of Spatially and Time Dependent Source Term in a TwoRegion Problem (with Silva, P. P., Orlande, H. R. B., Colaco, M. J., Shiakolas, P. S.), 5th International Conference on Inverse Problems in Engineering: Theory and Practice, (ed. Lesnic, D.), Cambridge, U.K., July 1115, 2005.

Inverse Approaches to Drying of Bodies With Significant Shrinkage Effects (with G. H. Kanevce, L. P. Kanevce, V. B. Mitrevski, H.R.B. Orlande), 5th International Conference on Inverse Problems in Engineering: Theory and Practice, (ed. Lesnic, D.), Cambridge, UK, July 1115, 2005.

Robust Optimization of Concentrations of Alloying Elements in Steel for Maximum Temperature, Strength, TimetoRupture and Minimum Cost and Weight (with YegorovEgorov, I. N.), Invited Lecture, ECCOMAS – Computational Methods for Coupled Problems in Science and Engineering, (eds: Papadrakakis, M., Onate, E., Schrefler, B.), Fira, Santorini Island, Greece, May 2528, 2005.

Obtaining PreSpecified Concentration Profiles in Thermosolutal Flows by Applying Magnetic Fields Having Optimized Intensity Distribution (with Colaco, M. J.), Invited Lecture, ECCOMAS – Computational Methods for Coupled Problems in Science and Engineering, (eds: Papadrakakis, M., Onate, E., Schrefler, B.), Fira, Santorini Island, Greece, May 2528, 2005.

A Multilevel Hybrid Optimization of Magnetohydrodynamic Problems in DoubleDiffusive Fluid Flow (with Colaco, M. J.), SMEC 2005 Conference (ed: Saxena, S.), Miami Beach, FL, April 1721, 2005.

Inverse and Optimization Problems in Heat Transfer (with Colaco, M. J. and Orlande, H.R.B.), Invited Lecture, 10th Brazilian Congress of Thermal Sciences and Engineering – ENCIT2004, Rio de Janeiro, RJ, Brazil, November 29 – December 3, 2004.

AeroThermalElasticityMaterials Optimization of Cooled Gas Turbine Blades: Part I (with Martin, T. J., Dennis, B. H. and Egorov, I. N.), in Lecture Series on Numerical Optimization Methods & Tools for MultiCriteria/MultiDisciplinary Design with Applications to Aeronautics and Turbomachinery, Von Karman Institute for Fluid Dynamics, Belgium, November 15 – 19, 2004.

AeroThermalElasticityMaterials Optimization of Cooled Gas Turbine Blades: Part II (with Martin, T. J., Dennis, B. H. and Egorov, I. N.), in Lecture Series on Numerical Optimization Methods & Tools for MultiCriteria/MultiDisciplinary Design with Applications to Aeronautics and Turbomachinery, Von Karman Institute for Fluid Dynamics, Belgium, November 15 – 19, 2004.

Inverse Determination of Steady Boundary Conditions in Heat Transfer and Elasticity (with Dennis, B. H., Martin, T. J.), Invited Lecture, minisymposium on “Inverse Problems in Engineering Mechanics”, 6th World Congress on Computational Mechanics, Beijing, China, Sept. 510, 2004.

Control of Flow Separation Over a Circular Cylinder With ElectroMagnetic Fields: Numerical Simulation, (with Dennis, B. H. and Yoshimura, S.), Invited Lecture, minisymposium on “Computational Electromagnetohydrodynamics”, 6th World Congress on Computational Mechanics, Beijing, China, Sept. 510, 2004.

Optimization of Alloy Chemistry for Maximum Stress and TimetoRupture at High Temperature (with YegorovEgorov, I. N.), paper AIAA20044348, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, NY, Aug. 30 – Sept. 1, 2004.

Convective Heat Transfer Control Using Magnetic and Electric Fields (with Colaco, M. J.), Keynote Lecture, International Thermal Science Seminar – ITSS II, ASMEICHMTZSIS, (eds: Bergles, A. E., Golobic, I., Amon, C. H. and Bejan, A.), Bled, Slovenia, June 1316, 2004, pp. 133144.

Inverse Problem of Aircraft Structural Parameter Estimation: Application of Neural Networks, (with Trivailo, P., Sgarioto, D. and Gilbert, T.), International Symposium on Inverse Problems, Design and Optimization – IPDO, Vol. II, (eds.: Cola�o, M.J., Dulikravich, G. S. and Orlande, H.R.B.), Rio de Janeiro, Brazil, March 1719, 2004, pp. 330337.

Inverse Design of Alloys for Specified Stress, Temperature and TimetoRupture by Using Stochastic Optimization (with YegorovEgorov, I. N.), International Symposium on Inverse Problems, Design and Optimization – IPDO, (eds: Colaco, M. J., Dulikravich, G. S. and Orlande, H. R. B.), Rio de Janeiro, Brazil, March 1719, 2004.

Aerodynamic Data Modeling Using Support Vector Machines (with Fan, H.Y. and and Han, Z.X.), AIAA paper 0313510, AIAA Aerospace Sciences Meeting, Reno, NV, January 1013, 2004.

Determination of Temperatures and Heat Fluxes on Surfaces and Interfaces of Multidomain ThreeDimensional Electronic Components (with Dennis, B. H. and Han, Z.X.), ASME paper IMECE200342273, Symposium on Cooling of Microlectronics, MEMS, Photonics, and Nano Devices, ASME IMECE 2003, Washington, DC, November 1621, 2003.

Optimization of Wall Electrodes for ElectroHydrodynamic Control of Natural Convection Effects During Solidification (with Colaco, M. J. and Martin, T. J.), ASME paper IMECE200341703, ASME IMECE 2003, Washington, DC, November 1621, 2003.

An Analytical Model of Phase Changing Chemically Reacting Flows (with Colaco, M. J.), ASME paper IMECE200341702, ASME IMECE 2003, Washington, DC, November 1621, 2003.

A Comparison of Two Solution Techniques for the Inverse Problem of Simultaneously Estimating the Spatial Variations of Diffusion Coefficients and Source Terms (with Rodrigues, F. and Colaco, M. J. and Orlande, H. R. B.), ASME paper IMECE200342058, ASME IMECE 2003, Washington, DC, November 1621, 2003.

Improvements to Mutation Donor of Differential Evolution (with Fan, H.Y. and Lampinen, J.), EUROGEN2003 – International Congress on Evolutionary Methods for Design, Optimization and Control with Applications to Industrial Problems, (eds: G. Bugeda, J. A D�sid�ri, J. Periaux, M. Schoenauer and G. Winter), CIMNE, Barcelona, Spain, September 1517, 2003.

Reducing Convection Effects in Solidification by Applying Magnetic Fields Having Optimized Intensity Distribution (with Colaco, M. J. and Martin, T. J.), Keynote Lecture, ASME paper HT200347308, ASME Summer Heat Transfer Conference, Las Vegas, NV, July 2123, 2003.

An Inverse Method for Drying Processes at High Mass Transfer Biot Number (with Kanevce, G. and Kanevce, Lj.), ASME paper HT200340146, ASME Summer Heat Transfer Conference, Las Vegas, NV, July 2123, 2003.

Inverse Determination of Eroded Smelter Wall Thickness Variation Using an Elastic Membrane Concept (with Baker, D. P., Dennis, B. H. and Martin, T. J.), ASME paper HT200347307, ASME Summer Heat Transfer Conference, Las Vegas, NV, July 2123, 2003.

Optimization of Perfusion Freezing Protocols for Preservation of ThreeDimensional Organs (with Dennis, B. H.), 2003 Bioengineering Summer Conference, Key Biscayne, FL, June 2631, 2003.

Optimization of a Large Number of Coolant Passages Located Close to the Surface of a Turbine Blade (with Dennis, B. H., Egorov, I. N. and Yoshimura, S.), ASME paper GT200338051, ASME Turbo Expo 2003, Atlanta, GA, June 1619, 2003.

Parallel Thermoelasticity Optimization of 3D Serpentine Cooling Passages in Turbine Blades (with Dennis, B. H., Egorov, I. N., Sobieczky, H. and Yoshimura, S.), ASME paper GT200338180, ASME Turbo Expo 2003, Atlanta, GA, June 1619, 2003.

Calibration of Microprocessor Control Systems for Specified Levels of Engine Exhaust Toxicity (with Egorov, I. N.), 2003 JUMV Conference – Science and Motor Vehicles, (ed: Duboka, C.), Belgrade, Serbia and Montenegro, May 2728, 2003.

Brain Cooling Strategies: Numerical Simulations on a Realistic Human Head Geometry (with Dennis, B. H., Eberhart, R. C. and Radons, S. W.), 5th International Conference on Simulations in Biomedicine, Ljubljana, Slovenia, April 24, 2003.

SemiStochastic Optimization of Chemical Composition of HighTemperature Austenitic Steels for Desired Mechanical Properties (with Egorov, I. N., Sikka, V. K. and Muralidharan, G.), 2003 TMS Annual Meeting, Yazawa International Symposium: Processing and Technologies, TMS Publication, (eds: Kongoli, F., Itakagi, K., Yamaguchi, C. and Sohn, H.Y.), Vol. 1, pp. 801814, San Diego, CA, March 26, 2003.

Optimization of Intensities and Orientations of Magnets Controlling Melt Flow During Solidification (with Colaco, J. M., Dennis, B. H., Martin, T. J. and Lee, S.), Symposium on Materials Processing Under the Influence of Electrical and Magnetic Fields, 2003 TMS Annual Meeting, San Diego, CA, March 26, 2003.

Magnetized Fiber Orientation and Concentration Control in Solidifying Composites (with Colaco, M., Martin, T. J. and Lee, S.), Symposium on Materials Processing Under the Influence of Electrical and Magnetic Fields, 2003 TMS Annual Meeting, San Diego, CA, March 26, 2003.

NonDestructive Inverse Determination of Refractory Wall Material Wear Configurations in Melting Furnaces (with Baker, D. P., Martin, T. J. and Dennis, B.H.), 2003 TMS Annual Meeting, San Diego, CA, March 26, 2003.

Estimation of Thermophysical Properties of a Drying Body at High Mass Transfer Biot Number (with Kanevce, G. and Kanevce, Lj.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’03, (ed: Tanaka, M.), Nagano, Japan, February 1821, 2003, Elsevier, pp. 1320.

Inverse Determination of Smelter Wall Erosion Shapes Using a Fourier Series Method (with Baker, D. P. and Martin, T. J.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’03, (ed: Tanaka, M.), Nagano, Japan, February 1821, 2003,Elsevier, pp. 231240.

Finite Element Simulation of Cooling of 3D Human Head and Neck (with Dennis, B. H., Eberhart, R. C. and Radons, S. W.), ASME IMECE 2002, paper IMECE2002HT32045, New Orleans, LA, November 1722, 2002.

Simultaneous Estimation of SpatiallyDependent Diffusion Coefficient and Source Term in Nonlinear 1D Diffusion (with Rodrigues, F. A. and Orlande, H. R. B.), Workshop on Inverse Obstacle Problems, Lisbon, Portugal, November 46, 2002.

Implicit and Explicit Sensitivities for Optimization of Cooled Turbine Blades (with Martin, T. J.), 9th AIAA/ISSMO Multidisciplinary Analysis & Optimization Symposium, paper AIAA20025435, Atlanta, GA, Sept. 46, 2002.

A 3D Finite Element Formulation for the Determination of Unknown Boundary Conditions for Steady Thermoelastic Problems (with Dennis, B. H. and Yoshimura, S.), Keynote Lecture, minisymposium on “Computational Treatment of Inverse Problems in Mechanics” at the 5th World Congress on Computational Mechanics (WCCMV), Vienna, Austria, July 7 – 12, 2002.

MultiDisciplinary Hybrid and Evolutionary Optimization (with Dennis, B. H., Martin, T. J. and Egorov, I. N.), Invited Lecture, minisymposium on “Evolutionary Algorithms in Engineering Optimization”, at the 5th World Congress on Computational Mechanics (WCCMV), Vienna, Austria, July 7 – 12, 2002.

Parameterized Structures for Inverse Design and Optimization (with Sobieczky, H. and Dennis, B. H.), 4th International Conference on Inverse Problems in Engineering: Theory and Practice (4icipe), Angra dos Reis, Brazil, May 2631, 2002.

Estimation of Drying Food Thermophysical Properties by Using Temperature Measurements (with Kanevce, Lj. and Kanevce, G. H.), 4th International Conference on Inverse Problems in Engineering: Theory and Practice (4icipe), Angra dos Reis, Brazil, May 2631, 2002.

Estimation of Thermophysical Properties of Moist Materials Under Different Drying Conditions (with Kanevce, G. H., Kanevce, Lj. and Orlande, H. R. B.), 4th International Conference on Inverse Problems in Engineering: Theory and Practice (4icipe), Angra dos Reis, Brazil, May 2631, 2002.

Rotor Cascade Shape Optimization With Unsteady Passing Wakes Using Implicit Dual Time Stepping and Genetic Algorithm (with Lee, E.S. and Dennis, B. H.), ASME ISROMAC9 Conference, Hawaii, February 1014, 2002.

Inverse Determination of Steady Surface Temperatures and Heat Fluxes on Arbitrary 3D Objects (with Dennis, B. H.), paper ASME IMECE2001/HTD24310, New York, November 1116, 2001.

Analysis and Multidisciplinary Optimization of Internal Coolant Networks in Turbine Blades (with Martin, T. J.), paper ASME IMECE2001/HTD24316, New York, November 1116, 2001.

Multidisciplinary Design Optimization (with Dennis, B. H., Martin, T. J. and Egorov, I. N.), Invited Lecture, EUROGEN 2001 – Evolutionary Methods for Design, Optimization and Control with Applications to Industrial Problems, (ed.: Giannakoglou, K., Tsahalis, D. T., Periaux, J. and Fogarty, T.), Athens, Greece, Sept. 1921, 2001, Published by International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 1118.

Multidisciplinary Analysis and Design Optimization (with Dennis, B. H., Martin, T. J. and Egorov, I. N.), Invited Lecture, MiniSymposium on Inverse Problems – State of the Art and Future Trends, XXIV Brazilian Congress on Applied and Computational Mathematics, Sept. 1013, 2001, Belo Horizonte, Brazil.

Multidisciplinary Inverse Design (with Martin, T. J. and Dennis, B. H.), Invited Lecture, MiniSymposium on Inverse Problems – State of the Art and Future Trends, XXIV Brazilian Congress on Applied and Computational Mathematics, Sept. 1013, 2001, Belo Horizonte, Brazil.

Stokes’ Hypothesis and Compression Shock Structure, Proceedings of 23rd International Symposium on Shock Waves,(ed. Lu, F. and Wilson, D.), Fort Worth, Texas, July 2327, 2001, pp. 158.

Magnetic Field Suppression of Melt Flow in Crystal Growth (with Dennis, B. H.), International Symposium on Advances in Computational Heat Transfer – CHT’01, (eds.: de Vahl Davis, G. and Leonardi, E.), Palm Cove, Queensland, Australia, May 2025, 2001, Begell House, Inc., New York, Vol. 2, pp. 11451152.

Simultaneous Estimation of Thermophysical Properties and Heat and Mass Transfer Coefficients of a Drying Body (with Kanevce, G. H. and Kanevce, Lj.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’01, (eds: Tanaka, M. and Dulikravich, G. S.), Nagano, Japan, February 69, 2001, Elsevier, Amsterdam, pp. 312.

A 3D Finite Element Formulation for the Determination of Unknown Boundary Conditions in Heat Conduction (with Dennis, B. H.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’01, (eds: Tanaka, M. and Dulikravich, G. S.), Nagano, Japan, February 69, 2001.

Electromagnetohydrodynamics (EMHD): Numerical Experiments in Steady Planar Flows (with Dennis, B. H.), Symposium on Recent Advances in the Mechanics of Structured Continua, (eds: Massoudi, M. and Rajagopal, K. R.), ASME IMECE 2K, Orlando, FL, Nov. 510, 2000, AMDVol. 244/MD.Vol. 92, pp. 1724.

Optimization of Organ Freezing Protocols With Specified Allowable Thermal Stress Levels (with Dennis, B. H. and Rabin, Y.), Symposium on Advances in Heat and Mass Transfer in Biotechnology, (eds: Scott, E. P. and Bischof, J. C.), ASME IMECE 2K, Orlando, FL, Nov. 510, 2000, HTDVol. 368/BEDVol. 47, pp. 3348.

Simulation of Magnetohydrodynamics With Conjugate Heat Transfer (with Dennis, B. H.), ECCOMAS2000 (European Congress on Computational Methods in Applied Sciences and Engineering), (ed: Onate, E., Bugeda, G. and Suarez, B.), Barcelona, Spain, September 1114, 2000.

Inverse Design and Optimization Using CFD (with Dennis, B. H.), Session on Contributions to Automated Design Using CFD, ECCOMAS2000 European Congress on Computational Methods in Applied Sciences and Engineering, (eds: Onate, E., Bugeda, G. and Suarez, B.), Barcelona, Spain, September 1114, 2000, pp. 595.

MultiObjective Optimization of Turbomachinery Cascades for Minimum Loss, Maximum Loading, and Maximum GaptoChord Ratio (with Dennis, B. H., Egorov, I. N., Han, Z.X., and Poloni, C.), AIAA Paper 20004876, 8th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA, September 68, 2000.

Moisture Diffusivity Estimation from Temperature Measurements: Influence of Measurement Accuracy (with Kanevce, G. H., Kanevce, Lj. P. and Mitrevski, V. B.), 12th International Drying Symposium (IDS2000), Noordwijkerhout, The Netherlands, August 2831, 2000.

Heat Transfer, Inverse Problems, and Multidisciplinary Design Optimization (with Martin, T. J. and Dennis. B. H.), Proceedings of a Conference of International Society for Computational Engineering & Sciences (ISCES), Los Angeles, CA, August 2125, 2000, (editors: Atlury, S. N. and Brust, F. W.), Vol. I, Tech Science Press, pp. 868873.

Influence of Boundary Conditions on Moisture Diffusivity Estimation by Temperature Response of a Drying Body (with Kanevce, G. H. and Kanevce, Lj. P.), ASME National Heat Transfer Conference, Pittsburgh, PA, August 2022, 2000, ASME paper NHTC200012296.

Inverse Determination of TemperatureDependent Thermal Conductivity Using Steady Surface Data on Arbitrary Objects (with Martin, T. J.), Symposium on Inverse Thermal Problems, ASME National Heat Transfer Conference, (editors: G. S. Dulikravich, K. Woodbury and B. F. Blackwell), Pittsburgh, PA, August 2022, 2000, ASME paper NHTC200012038.

Simulation of ElectroMagnetoHydroDynamics (EMHD) with pVersion LeastSquares Finite Element Method (with Dennis, B. H.), International Conference on Finite Elements in Flow Problems 2000, Austin, TX, April 30 – May 4, 2000.

Determination of Unsteady Container Temperatures During Freezing of Threedimensional Organs With Constrained Thermal Stresses (with Dennis, B. H.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’2k, (editors: M. Tanaka and G. S. Dulikravich), Nagano, Japan, March 710, 2000, Elsevier Science Ltd, Amsterdam, pp. 139148.

Moisture Diffusivity Estimation by Temperature Response of a Drying Body (with Kanevce, G. H. and Kanevce, Lj. P.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’2k, (editors: M. Tanaka and G. S. Dulikravich), Nagano, Japan, March 710, 2000, Elsevier Science Ltd, Amsterdam, pp. 4352.

Metamodel Integration Technology for Multidisciplinary Design (with Barton, R. R.), 2000 NSF Design & Manufacturing Grantees Conference, Vancouver, Canada, January 58, 2000.

NonReflective Boundary Conditions for a Consistent Model of Axisymmetric ElectroMagnetoHydrodynamic Flows (with Ko, H.J.), Symposium on Rheology and Fluid Mechanics of Nonlinear Materials, ASME IMECE’99, Editor: D. A. Siginer, Nashville, TN, November 1419, 1999, ASME FEDVol. 249, pp. 97104.

Maximizing Multistage Axial Gas Turbine Efficiency Over a Range of Operating Conditions (with Petrovic, M. V. and Martin, T. J.), Proceedings of 10TH Thermal & Fluids Analysis Workshop (TFAWS’99), Ed: L. W. Griffin, NASA Marshall Space Flight Center, Huntsville, AL, Sept. 1317, 1999.

NonReflective Boundary Conditions for a Consistent Twodimensional Planar ElectroMagnetoHydrodynamic Flow Model (with H.J. Ko), Forum on Functional Fluids, 1999 Joint ASME/JSME Fluids Engineering Conference, Editors: G. S. Dulikravich, S. Sawada, and K. Yamane, San Francisco, CA, July 18 – 23, 1999.

Multidisciplinary Inverse Problems (with Martin, T. J. and Dennis, B. H.), Invited Lecture, 3rd International Conference on Inverse Problems in Engineering (3icipe): Theory and Practice, Editor: K. Woodbury, Port LudlowPuget Sound, WA, June 1318, 1999; ASME Engineering Foundation, pp.18.

Metamodel Integration Technology for Multidisciplinary Design, (with R. R. Barton), 1999 NSF Design & Manufacturing Grantees Conference, Los Angeles, CA, January 58, 1999.

Multidisciplinary Inverse Design and Optimization of Gas Turbine Blades, 1999 NSF Design & Manufacturing Grantees Conference, Los Angeles, CA, January 58, 1999.

Simultaneous Determination of Temperatures, Heat Fluxes, Deformations, and Tractions on Inaccessible Boundaries (with B. H. Dennis), Symposium on Inverse Problems in Mechanics, ASME IMECE’98, Editors: L. G. Olson and S. Saigal, Anaheim, CA, Nov. 1520, 1998, ASME AMDVol. 228, pp. 110.

A Fully NonLinear Theory of ElectroMagnetoHydrodynamics (with H.J. Ko), Symposium on Rheology and Fluid Mechanics of NonLinear Materials, ASME IMECE’98, Editors: D. A. Siginer and D. De Kee, Anaheim, CA, Nov. 1520, 1998, ASME FEDVol. 246/MDVol.81, pp. 173182.

AeroThermal Optimization of Internally Cooled Turbine Blades (with T. J. Martin and Z.X. Han), Minisymposium on MultidisciplinaryOptimum Design, Fourth ECCOMAS Computational Fluid Dynamics Conference, Editors: K. Papailiou, D. Tsahalis, J. Periaux, D. Knoerzer, Athens, Greece, September 711, 1998, Vol. 2, pp.158161, John Wiley & Sons, New York.

AeroThermoStructural Design Optimization of Cooled Turbine Blades (with T. J. Martin, B. H. Dennis, E.S. Lee, and Z.X. Han), AGARD – AVT Propulsion and Power Systems Symposium on Design Principles and Methods for Aircraft Gas Turbine Engines, NATORTOMP8 AC/323(AVT)TP/9, Ch. 35, Toulouse, France, May 1115, 1998.

Fourier Series Analytical Solution for Inverse Design of Aerodynamic Shapes (with D. P. Baker), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’98, Editors: M. Tanaka and G.S. Dulikravich, Nagano City, Japan, March 2427, 1998, Elsevier Science, pp. 427436.

A Finite Element Formulation for the Detection of Boundary Conditions in Elasticity and Heat Transfer (with B. H. Dennis), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’98, Editors: M. Tanaka and G. S. Dulikravich, Nagano, Japan, March 2427, 1998, Elsevier Science, pp. 6170.

Boundary Conditions for ElectroMagnetoHydrodynamics (with Y.H. Jing ), Symposium on Rheology and Fluid Mechanics of NonLinear Materials, Editors: S. G. Advani and D. A. Siginer, ASME IMECE’97, Dallas, TX, Nov. 1621, 1997, ASME FEDVol. 243/MDVol. 78, pp. 101117.

ThermoElastic Analysis and Optimization Environment for Internally Cooled Turbine Airfoils (with B. H. Dennis), XIII International Symposium on Airbreathing Engines (XIII ISABE), Editor: F. S. Billig, Chattanooga, TN, Sept. 812, 1997, ISABE 977181, Volume 2, pp. 13351341.

AeroThermal Analysis and Optimization of Internally Cooled Turbine Airfoils (with T. J. Martin), XIII International Symposium on Airbreathing Engines (XIII ISABE), Editor: F. S. Billig, Chattanooga, TN, Sept. 812, 1997, ISABE 977165, Volume 2, pp. 12321250.

Inverse Determination of Steady Local Convective Heat Transfer Coefficients (with T. J. Martin), Symposium on Inverse Design Problems in Heat Transfer and Fluid Flow, Editors: G. S. Dulikravich and K. A. Woodbury, ASME National Heat Transfer Conference, Baltimore, MD, August 1012, 1997, ASME HTDVol. 340, Volume 2, pp. 151158.

NonIterative Inverse Determination of TemperatureDependent Heat Conductivities (with T. J. Martin), Symposium on Inverse Design Problems in Heat Transfer and Fluid Flow, Editors: G. S. Dulikravich and K. A. Woodbury, ASME National Heat Transfer Conference, Baltimore, MD, August 1012, 1997, ASME HTDVol. 340, Volume 2, pp. 141150.

Multidisciplinary Inverse Problems and Solution Methods, (Invited Lecture with T. J. Martin), Advanced Technology in Experimental Mechanics – ATEM97, Editor: Y. Morimoto, Wakayama City, Osaka, Japan, July 2526, 1997, pp. 8388.

Software for Solving Thermoelastic Problems on Arbitrary Domains Using Multigrid and Adaptive Mesh Refinement (with Dennis, B. H.). Third IMACS International Symposium on Iterative Methods in Scientific Computation, Jackson, WY, July 912, 1997.

Inverse Determination of Boundary Conditions in Multidomain Heat Transfer Problems, (Invited Lecture with T. J. Martin), BETECH ’97 – 9th International Conference on Boundary Element Technology, Editor: J. Frankel, Knoxville, TN, April 911, 1997, pp. 99110.

Multidisciplinary Inverse Design and Optimization of Turbine Blades, 1997 National Science Foundation Design and Manufacturing Grantees Conference, Seattle, WA, January 710, 1997, pp. 2930.

Inverse Determination of Temperatures and Heat Fluxes on Surfaces of 3D Objects (with T. J. Martin), PanAmerican Congress of Applied Mechanics (PACAMV), San Juan, Puerto Rico, January 24, 1997, in Applied Mechanics in the Americas, Editors: M. Rysz, L. A. Godoy and L. E. Suarez, The University of Iowa, Iowa City, Vol. 5, pp. 133136.

AeroThermalStructural Optimization (with T. J. Martin and B. H. Dennis), NASA/ICOMP 1996 Coolant Flow Management Workshop, Cleveland, Editors: S. Hippensteele and J. Gladden, OH, December 1213, 1996, NASA Conference CP 10195, pp. 311334.

Determination of Temperatures and Heat Fluxes on Surfaces of Multidomain ThreeDimensional Electronic Components (with T. J. Martin), Symposium on Application of CAE/CAD to Electronic Systems, Editors: D. Agonafer, R. E. Fulton, G. J. Kowalski and P. Cierkus, 1996 ASME Int. Mechanical Engineering Congress and Exposition, Atlanta, GA, November 1722, 1996, ASME EEPVol. 18, pp. 110.

Fully Conservative Forms of a System of Unified ElectroMagnetoHydrodynamic Equations (with Y.H. Jing), Symposium on Rheology and Fluid Mechanics of Nonlinear Materials, Editors: D. A. Siginer and S. G. Advani, 1996 ASME International Mechanical Engineering Congress and Exposition, Atlanta, GA, November 1722, 1996, AMDVol. 217, pp. 309314.

Finding Temperatures and Heat Fluxes on Inaccessible Surfaces in 3D Coated Rocket Nozzles (with T. J. Martin), 1995 JANNAF NonDestructive Evaluation Propulsion Subcommittee Meeting, Tampa, FL, Dec. 48, 1995, Chemical Propulsion Information Agency – CPIA Publication 637, Dec. 1995, pp. 119129.

ElectroMagnetoHydrodynamics: Part 2 – A Survey of Mathematical Models (with S. R. Lynn), Symposium on Developments in Electrorheological Flows1995, Editors: D. A. Siginer and G. S. Dulikravich, ASME WAM’95, San Francisco, CA, November 1217, 1995, ASME FEDVol. 235, MDVol. 71, pp. 5970.

ElectroMagnetoHydrodynamics: Part 1 – Introductory Concepts (with S. R. Lynn), Symposium on Developments in Electrorheological Flows1995, Editors: D. A. Siginer and G. S. Dulikravich, ASME WAM’95, San Francisco, CA, November 1217, 1995, ASME FEDVol. 235, MDVol. 71, pp. 4958.

Inverse Determination of Boundary Conditions in Steady Heat Conduction With Heat Generation (with T. J. Martin), Symposiums on Conjugate Heat Transfer, Inverse Problems, and Optimization, and Inverse Problems in Heat Transfer, Editors: W. J. Bryan and J. V. Beck, ASME National Heat Transfer Conference, Portland, OR, August 68,1995, ASME HTDVol. 312, pp. 3946.

Magnetic Field Control of Vorticity in Steady Incompressible Laminar Flows (with K.Y. Choi and S. Lee), Symposium on Developments in Electrorheological Flows and Measurement Uncertainty 1994, ASME WAM’94, Editors: D. A. Siginer, J. H. Kim, S. A. Sheriff and H. W. Colleman, Chicago, IL, November 611,1994, ASME FEDVol. 205/AMDVol. 190, pp. 125142.

An Interactive Multidisciplinary Analysis, Design & Optimization (MDA&O) Approach to Electronic Packaging (with N. F. Foster, T. J. Martin and J. D. Halderman), Symposium on CAE/CAD Application to Electronic Packaging, ASME WAM’94, Eds: D. Agonafer and R. E. Fulton, Chicago, IL, November 611,1994, ASME EEPVol. 9, pp. 1524.

An Inverse Method for Finding Unknown Surface Tractions and Deformations in Elastostatics (with J. D. Halderman and T. J. Martin), Symposium on Inverse Problems in Mechanics, ASME WAM’94, Editors: S. Saigal and L. G. Olson, Chicago, IL, November 611,1994, ASME AMDVol. 186, pp. 5766.

Inverse Problems and Design in Heat Conduction (with T. J. Martin), 2nd IUTAM International Symposium on Inverse Problems in Engineering Mechanics, Editors: H. D. Bui, M. Tanaka, M. Bonnet, H. Maigre, E. Luzzato and M. Reynier, Paris, France, November 24, 1994, A. A. Balkema, Rotterdam, 1994, pp. 1320.

Convergence Rate Enhancement of NavierStokes Codes on Clustered Grids (with K.Y. Choi), 6th Annual Symposium of the Penn State – NASA Propulsion Eng. Research Center, NASA Lewis Research Center, Cleveland, OH, September 1314, 1994, pp. 177181.

Finding Unknown Surface Temperatures and Heat Fluxes in Steady Heat Conduction (with T. J. Martin), 4th Intersociety Conference on Thermal Phenomena in Electronic Systems, Editors: A. Ortega and D. Agonafer, Washington, D. C., May 47, 1994, pp. 214221.

Convergence Acceleration of Iterative Algorithms Using a SensitivityBased Minimal Residual (SBMR) Method (with K. Y. Choi), 12th Workshop for Computational Fluid Dynamic Applications in Rocket Propulsion, NASA Marshall Space Flight Center, Huntsville, AL, April 1921, 1994.

Inverse Determination of Temperatures and Heat Fluxes on Inaccessible Surfaces (with T. J. Martin), 9th International Conference on Boundary Element Technology – BETECH 94, Computational Mechanics Publications, Southampton, Eds: C. Brebbia and A. Kassab, Orlando, FL, March 1618, 1994, pp. 6976.

Dielectric Fluids Solidification With Charged Particles in Electric Fields and Reduced Gravity (with V. Ahuja), ASME WAM’94, Symposium on Heat Transfer in a Microgravity, Editors: C. T. Avedisian and V. S. Arpaci, New Orleans, LA, November 29December 3, 1993, ASME HTDVol. 269, pp. 119130.

Inverse Design of Threedimensional Shapes With Overspecified Thermal Boundary Conditions, Monograph on Inverse Problems in Mechanics, Editor: S. Kubo, Atlanta Technology Publications, Atlanta, GA, September1993, pp. 280140.

Reliability Enhancement of NavierStokes Codes Through Convergence Enhancement (with K.Y. Choi), 5th Annual Symposium of the Penn State – NASA Propulsion Engineering Research Center, Editor: C. L. Merkle, University Park, PA, Sept. 89, 1993, pp. 173178.

A Direct Approach to Finding Unknown Boundary Conditions in Steady Heat Conduction (with T. J. Martin), 5th Annual Thermal and Fluids Analysis Workshop, Ohio Aerospace InstituteNASA Lewis Research Center, Editor: D. Darling, Brookpark, OH, August 1620, 1993, NASA CP10122, pp. 137149.

ThreeDimensional Solidification and Melting Using Magnetic Field Control (with V. Ahuja), 5th Annual Thermal and Fluids Analysis Workshop, Ohio Aerospace InstituteNASA Lewis Research Center, Editor: D. Darling, Brookpark, OH, August 1620, 1993, NASA CP10122, pp. 449466.

Unsteady ThreeDimensional Thermal Field Prediction In Turbine Blades Using Nonlinear BEM (with T. J. Martin), 5th Annual Thermal and Fluids Analysis Workshop, Ohio Aerospace InstituteNASA Lewis Research Center, Editor: D. Darling, Brookpark, OH, August 1620, 1993, NASA CP10122, pp. 467476.

Simulation of Electrohydrodynamic Enhancement of Laminar Flow Heat Transfer (with V. Ahuja and S. Lee), ASME National Heat Transfer Conference, Symposium on Fundamentals of Heat Transfer in Electromagnetic, Electrostatic, and Acoustic Fields, Editors: Y. Bayazitoglu and V. S. Arpaci, Atlanta, GA, August 811, 1993, ASME HTDVol. 248, pp. 4352.

Computer Simulation of Free Flow Electrophoretic Separation (with S. Lee and V. Ahuja), 2nd International Conference on Fluid Mechanics (ICFMII), Editor: Zhang Zhaosun, Beijing, P. R. China, July 710, 1993.

Computations of ElectroThermoConvective Phenomena in ElectroRheological Fluids (with S. Lee and V. Ahuja), ASME Fluids Engineering Conference, Symposium on ElectroRheological Flows, Eds: D. A. Siginer, J. H. Kim and R. A. Bajura, Washington, D. C., June 2124, 1993, ASME FEDVol. 164, pp. 2942.

Transonic Airfoil Thickness Variation Requirements for Maintaining ShockFree Flow (with H. Sobieczky), Smart Structures and Materials ’93, Editors: N. W. Hagood and G. J. Knowles, Albuquerque, N.M., February14, 1993, SPIE Vol. 1917, pp. 119124.

ThreeDimensional Control of Crystal Growth Using Magnetic Fields (with V. Ahuja), Smart Structures and Materials ‘93, Smart Materials, Editor: V. K. Varadan, Albuquerque, N.M., February 14, 1993, SPIE Vol. 1916, pp. 6575.

Electrohydrodynamic Flow Simulation, Pan American Congress of Applied Mechanics (PACAMIII), Eds: M. R. M. Crespo da Silva, D. T. Mook, D. L. Zagottis, Sao Paulo, Brazil, Jan. 48, 1993, pp. 303306.

Inverse Design of Super Elliptic Coolant Passages in Coated Turbine Blades With Specified Temperatures and Heat Fluxes (with T. J. Martin), AIAA paper 924714, 4th AIAA/Air Force/NASA/OAI Symposium of Multidisciplinary Analysis and Optimization, Cleveland, OH, September 2123, 1992, pp.

Determination of the Proper Number, Locations, Sizes and Shapes of Superelliptic Coolant Flow Passages in Turbine Blades (with T. J. Martin), Proceedings of ICHMT International Symposium on Heat Transfer in Turbomachinery, August 2428, 1992, Athens, Greece, in Heat Transfer in Turbomachinery, Eds: R. J. Goldstein, A. I. Leontiev, D. E. Metzger, Begell House, Inc., New York, pp. 3142.

Magnetized Fiber Orientation Control in Solidifying Composites: Numerical Simulation, (with B. Kosovic), 9th National Heat Transfer Conference, Symposium on Transport Phenomena in Materials Processing and Manufacturing, San Diego, CA, Aug. 912, 1992, ASME/HTDVol. 196, pp. 135144.

Unsteady Solidification in Microgravity (with B. Kosovic), 9th National Heat Transfer Conference, Symposium on Topics in Heat Transfer, Eds: R. S. Downing, L. Haas, S. Chellaiah, E. E. Anderson, K. Vafai, W. S. Chang and G. R. Cunnington, ASME/HTDVol. 2063, San Diego, CA, Aug. 912, 1992, pp. 1320.

Aerodynamic Shape Optimization of Hypersonic Configurations Including Viscous Effects (with S. Sheffer), AIAA paper 922635, AIAA 10th Applied Aerodynamics Conference, Palo Alto, June 2224, 1992, pp. 343351.

Inverse Shape Design and Optimization in Aerothermodynamics, 4th Annual Symposium on Inverse Problems in Engineering, Editor: J. V. Beck, Michigan State University, East Lansing, MI, June 1112, 1992, pp. 112127.

Reliability Enhancement of NavierStokes Codes Through Convergence Enhancement (with C. Merkle, S. Venkateswaran, K. Choi and P. Buelow), Conference on Advanced EarthtoOrbit Propulsion Technology, Editors: R. J. Richmond and S. T. Wu, NASA MSFC, Huntsville, AL, May 1921, 1992, NASA CP3174, Vol. 2, pp. 114123.

Determination of Void Shapes, Sizes and Locations Inside an Object with Known Surface Temperature and Heat Flux (with T. J. Martin), IUTAM Symposium on Inverse Problems in Engineering Mechanics, Tokyo, Japan, May 1116, 1992, Editors: M. Tanaka and H. D. Bui, SpringerVerlag, 1993, pp. 489496.

Inverse Design of Proper Number, Shapes, Sizes and Locations of Coolant Flow Passages, 10th Workshop for Computational Fluid Dynamic Applications in Rocket Propulsion, NASA Marshall Space Flight Center, Huntsville, AL, April 2830, 1992, NASA CP3163, Part 1, pp. 467486.

Solidification in Reduced Gravity With Magnetic Fields and TemperatureDependent Physical Properties (with B. Kosovic and S. Lee), ASME WAM ’91, Symposium on Heat and Mass Transfer in Solidification Processing, Atlanta, GA, Dec. 16, 1991, Editors: G. S. Advani and C. Beckermann, HTDVol. 175/MDVol. 25, pp. 6173.

Aerodynamic Shape Optimization of Arbitrary Hypersonic Vehicles (with S. Sheffer), 3rd Int. Conf. on Inverse Design Concepts and Optimization in Engineering Sciences (ICIDESIII), Editor: G. S. Dulikravich, Washington, DC, Oct. 2325, 1991, pp. 347358.

Freezing Under the Influence of a Magnetic Field: Computer Simulation (with B. Kosovic and S. Lee), 1991 ICHMT International Symposium on Macroscopic and Microscopic Heat & Mass Transfer in Biomedical Eng., Athens, Greece, Sept. 26, 1991, Editors: K. R. Diller and A. Shitzer, Hemisphere Publishing Co., 1992, pp. 337356.

Computation of Magnetohydrodynamic Flows With Joule Heating and Buoyancy (with S. Lee), International Aerospace Congress, Melbourne, Australia, May 1317, 1991.

Interaction of a Magnetic Field With Blood Flow (with B. Kosovic and S. Lee), 17th Annual Northeast Bioengineering Conference, University of Connecticut, Hartford, CT, April 45, 1991, pp. 79.

Computer Simulation of Electrophoretic Separation Processes, (with B. Kosovic and S. Lee), 17th Annual Northeast Bioengineering Conference, Univ. of Connecticut, Hartford, CT, April 45, 1991, pp. 89.

Reliability Enhancement of NavierStokes Codes Through Convergence Acceleration (with S. Lee), 2nd PanAmerican Congress of Applied Mechanics (PACAM), Editors: D. Mook and P. Kittl, Valpareiso, Chile, January 25, 1991, pp. 433435.

Acceleration of Iterative Algorithms Using Distributed Minimal Residual Method (with S. Lee), 2nd World Congress on Computational Mechanics, Editor: I. Doltsinis, Stuttgart, F. R. Germany, August 2731, 1990, pp. 280131.

Grid Generation Using a Posteriori Optimization With Geometrically Normalized Functionals (with B. W. Siebert), AIAA paper 903048, AIAA Applied Aerodynamics Conference, Portland, OR, Aug. 2022, 1990, pp. 917924.

Aerodynamic Shape Optimization of Hypersonic Missiles (with R. Buss, E. Strang and S. Lee), AIAA paper 903073, AIAA Applied Aerodynamics Conference, Portland, OR, Aug. 2022, 1990, pp. 840845.

Accelerated Computation of Viscous Incompressible Flows With Heat Transfer (with S. Lee), First International Conference on Experimental and Computational Aerothermodynamics of Internal Flows, Editor: Chen, N.X. and Jiang, H.D., Beijing, P.R. China, July 711, 1990, pp. 2534.

Shape Determination Via Optimization in Multiply Connected Domains, 3rd Annual Inverse Problems in Engineering Seminar, Ed: J. V. Beck, Michigan State Univ., East Lansing, MI, June 2526, 1990. pp. 7586.

A StreamFunctionCoordinate (SFC) Concept in Aerodynamic Shape Design, AGARD Specialist Workshop on Inverse Methods in Airfoil Design for Aeronautical and Turbomachinery Applications, AGARDR780, Editor: R. V. D. Braembussche, VKI, Brussels, Belgium, May 1418, 1990, pp. 6.16.6.

Aerodynamic Shape Design, AGARD Specialist Workshop on Inverse Methods for Airfoil Design for Aeronautical and Turbomachinery Applications, AGARDR780, Editor: R. V. D. Braembussche, VKI, Brussels, Belgium, May 1418, 1990, pp. 1.11.10.

Distributed Minimal Residual (DMR) Method for Acceleration of Iterative Algorithms (with S. Lee), CFD Symposium on Aeropropulsion, Editors: M.S. Liou and L. I. Povinelli, NASA Lewis Research Center, Cleveland, OH, April 2426, 1990, NASA CP 3078, pp. 259279.

Computer Simulation of Convective Cooling Effectiveness Inside Turning Passages (with S. Lee), 16th Northeast Bioengineering Conference, Editor: R. Gaumont, Penn State University, University Park, PA, March 2627, 1990, pp. 2728.

A Fast Iterative Algorithm for Incompressible NavierStokes Equations, (with S. Lee), Proceedings of 10th Brazilian Congress of Mechanical Engineering, Editor: A. M. D. de Figueiredo, Rio de Janeiro, Brazil, December 710, 1989, Vol. 1, pp. 193195.

An Active Control System for Thermal Fields in Hypothermic Processes (with C. Ambrose and L. J. Hayes), National Heat Transfer Conference, Philadelphia, PA, Aug. 69, 1989, Editor: S. B. Yilmaz, AIChE Symposium Series 269, Vol. 85, pp. 440405.

Cryopreservation Perfusion Flow Simulation Using NavierStokes Equations (with S. Lee), CRYO ’89 Cryobiology Society 26th Annual Meeting, Charleston, SC, June 1116, 1989, Abstract no. 136.

Physically Consistent Artificial Dissipation for Computational Fluid Dynamics, 7th International Conference on Finite Elements in Flow Problems, Editor: T. J. Chung, Huntsville, AL, April 37, 1989, pp. 11991204.

Control of Interior Cooling Rates in Heterogeneous Materials by Varying, Surface Thermal Boundary Conditions (with J. V. Madison and L. J. Hayes), 1st PanAmerican Congress of Applied Mechanics (PACAM), Editors: C. R. Steele and L. Bevilacqua, Rio de Janeiro, Brazil, January 36, 1989, pp. 420423.

Control of Surface Temperatures to Optimize Survival in Cryopreservation, (with L. J. Hayes), ASME WAM’88, Chicago, IL, Nov. 27 – Dec. 2. 1988, Symposium on Computational Methods in Bioengineering, Editors: R. L. Spilker and B. R. Simon, ASME BED Vol. 9, pp. 255265.

Iterative Acceleration and Physically Based Dissipation for Euler Equations of Gasdynamics (with D. J. Dorney and S. Lee), ASME WAM’88, Chicago, IL, Nov. 27 – Dec. 2. 1988, Symposium on Advances and Applications in Computational Fluid Dynamics, Ed.,: O. Baysal, ASME FED – Vol. 66, pp. 8192.

Distributed Minimal Residual (DMR) Method for Explicit Algorithms Applied to Nonlinear Systems (with S. Lee and D. J. Dorney), Conference on Iterative Methods for Large Linear Systems, Editor: D. Kinkaid, Austin, TX, Oct. 1921, 1988, pp. 13.

A Cavitation Theory Based on Gasdynamic Formulation, Conference on Hydraulic Machinery, Editor: B. Velensek, Ljubljana, Yugoslavia, Sept. 1315, 1988, pp. 353360.

Physically Consistent Models for Artificial Dissipation in Transonic Potential Flow Computations (with K. W. Mortara and L. Marraffa), AIAA Paper 883653, First National Fluid Dynamics Congress, Cincinnati, OH, July 2428, 1988, Volume I, pp. 280287.

Optimization of Container Wall Temperature Variation During Transplant Tissue Cooling (with J. V. Madison and L. J. Hayes), International Conference on Inverse Design Concepts and Optimization in Eng. Sciences (ICIDESII), Editor: G. S. Dulikravich, Penn State Univ., University Park, PA, Oct. 2628, 1987, pp. 321336.

Computations of Unsteady Dissociating Nitrogen Flows (with L. Marraffa and G. S. Deiwert), 7th GAMM Conference on Numerical Methods in Fluid Mechanics, LouvainlaNeuve, Belgium, Sept. 911, 1987, Editor: M. Deville, in Notes on Fluid Mechanics, Vieweg, Braunschweig, 1988, Vol. 20, pp. 211218.

Numerical Simulation of TwoDimensional Viscous Unsteady Dissociating Nitrogen Flows (with L. Marraffa and G. S. Deiwert), AIAA paper 872549CP, AIAA 5th Applied Aerodynamics Conference, Monterey, CA, Aug. 1719, 1987.

Acceleration of Explicit MultiStepping Algorithms, First International Conference on Industrial and Applied Mathematics, Paris, France, June 29July 3, 1987, Book of Abstracts, pp. 130.

Inverse Design and Optimization of Cryopreservation Procedures (with L. J. Hayes and T. L. Chiang), 2nd ASMEJSME Thermal Engineering Joint Conference, Honolulu, Hawaii, March 2227, 1987; ASME Book #I02195, pp. 525529.

Inverse Design of Coolant Flow Passages in Ceramically Coated ScramJet Combustor Struts (with T. L. Chiang and L. J. Hayes), ASME WAM’86, Symposium on Numerical Methods in Heat Transfer, Editors: Chen and K. Vafai, Anaheim, CA, Dec. 1986, ASME HTDVol. 62, pp. 16.

A Comparison of Grid Generation Techniques (with S. R. Kennon), INFOMARTACM/IEEE Computer Society 1986 Fall Joint Computer Conference, Editors: H. S. Stone and S. Winkler, Dallas, TX, Nov. 26, 1986, pp. 568575.

Acceleration Methods for Iterative Algorithms (with C. Y. Huang and S. R. Kennon), First World Congress on Computational Mechanics, Austin, TX, Sept. 2226, 1986.

Composite Computational Grid Generation Using Optimization (with S. R. Kennon), First International Conference on Numerical Grid Generation in Computational Fluid Dynamics, Editors: J. Haeuser and C. Taylor, Landshut, W. Germany, July 1417, 1986, pp. 217 226.

Analysis of Unsteady Compressible Cascade Flows Using Boundary Element and FreeVortex Method (with T. Fujinami), 6th International Symposium on Finite Element Methods in Flow Problems, Antibes, France, June 1620, 1986, pp. 131136.

FreeVortex Method Simulation of Unsteady Airfoil/Vortex Interaction (with T. Fujinami and A. Hassan), AIAA 4th Applied Aerodynamics Conference, San Diego, CA, June 912, 1986, pp. 189196.

Generation of Optimum ThreeDimensional Computational Grids (with R. Carcaillet and S. R. Kennon), 6th GAMM Conference on Numerical Methods in Fluid Mechanics, Editors: D. Rues and W. Kordulla, Goettingen, Germany, Sept. 2527, 1985, pp. 3946.

Inverse Design of Multiholed Internally Cooled Turbine Blades (with S. R. Kennon), International Conference on Inverse Design Concepts in Engineering Sciences (ICIDESI), Editor: G. S. Dulikravich, Austin, TX, October 1718, 1984, pp. 217240.

Efficient Turbomachinery Grid Generation Using Traupel’s Conformal Mapping (with S. R. Kennon), 1983 ASME Applied Mechanics, Bioengineering and Fluids Conference, Symposium on Advances in Grid Generation, Houston, TX, June 2022, 1983, Editors: K. N. Ghia and U. Ghia, ASME FEDVol. 5, 1983, pp. 199204.

Artificial Mass Concept and Transonic Viscous Flow Equation (with P. Niederdrenk), First Army Conference on Applied Mathematics and Computing, Washington, D.C., May 911, 1983, pp. 259268.

Fast Generation of ThreeDimensional Computational Boundary Conforming Periodic Grids of Ctype, in Numerical Grid Generation, Editor: J. F. Thompson, North Holland Publishers, The Netherlands, 1982, pp. 563584.

Numerical Calculation of Transonic Axial Turbomachinery Flows, Lecture Notes in Physics, Vol. 141, SpringerVerlag, 1981, pp. 164169.

Fast Generation of Body Conforming Grids for 3D Axial Turbomachinery Flow Calculation, Workshop on Numerical Grid Generation Techniques for Partial Differential Equations, NASA Langley, Hampton, VA, Oct. 67, 1980, NASA CP2166, 1980, AIAA paper 800605, pp. 241252.

Numerical Calculation of Steady Inviscid Full Potential Compressible Flow About Wind Turbine Blades, AIAA/SERI Wind Energy Conference, Boulder, CO, April 911, 1980, pp. 1419.
Search MAIDROC

Recent Posts
 Invited Lecture on “Transition to LowGWP Refrigerants: Options and Tradeoffs” by Dr. Piotr A. Domanski on April 1, 2016 (Friday)
 Invited Lecture on “Multiphase Flow CFD in Marine Applications” by Professor Robert Kunz on on February 19, 2016 (Friday)
 Invited Lecture on “IOSO – Robust Multiobjective Design Optimization” by Professor Igor N. Egorov on February 18, 2016 (THURSDAY)
 Invited Lecture on “Reshaping the Thermal Transport Processes Program: NSF News and Updates” by Professor José L. Lage on February 12, 2016 (Friday)
 Invited Lecture on “COMPUTATIONAL MATERIALS DESIGN CHALLENGES FOR METALLIC MATERIALS” by Professor David L. McDowell on January 29, 2016 (FRIDAY)
Recent Comments
 Invited Lecture on “Flow Boiling Processes in Micro Domains – Experimental Challenges and Opportunities” by Professor Yoav Peles on February 13, 2015 (Friday)  MAIDROC on Founder and Director
 Invited Lecture on “The Reciprocity Function Approach Applied To Linear Heat Conduction Inverse Problems” by Professor Marcelo J. Colaco on February 20, 2015 (FRIDAY)  MAIDROC on Founder and Director
Archives
Categories
 MAIDROC (22)