Papers in Conference Proceedings (Referred*)

1. Parameter Identification in a System of Differential Equations Modeling Evolution of Epidemic Diseases (with Blower, S., Hernandez, A., Colaco, M. J. and Moral, R. J.), Minisymposium on "Inverse Problems in Engineering”, Conference on Applied Inverse Problems 2007 (AIP07), Vancouver, Canada, June 25-29, 2007.

2. Statistical Modeling of Rarefied Gas Flows in Microchannels (with Gokaltun, S., Skudarnov, P. V. and Sukop, M. C.), paper AIAA-2007-4583, 18th AIAA Computational Fluid Dynamics Conference, Miami, FL, June 25-28, 2007.

3. Inverse Shape Design of Wing-Body-Tail Aircraft Configurations (with Rodriguez, A.), Workshop for book series "Frontiers of CFD" (eds: Hafez, M. and Sobieczky, H.), University of California, Davis, CA, June 20-21, 2007.

4. Lattice Boltzmann Method for Steady Gas Flows in Microchannels With Imposed Slip Wall Boundary Condition (with Gokaltun, S.), 5^th International ASME Conference on Nanochannels, Microchannels and Minichannels (ICNMM07), Universidad de la Americas, Puebla, Mexico, June 18-20, 2007.

5. Inverse Approaches to Drying of Sliced Foods (with Kanevce, G. H., Kanevce, Lj. P., and Mitrevski, V. B.), International Symposium on Inverse Problems, Design and Optimization (IPDO-2007), (eds.: Dulikravich, G. S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 16-18, 2007.

6. Inverse Approaches in Improvement of Air Pollution Plume Dispersion Models for Regulatory Applications (with Kanevce, G. H., Kanevce, Lj. P., and Andreevski, I. B.), International Symposium on Inverse Problems, Design and Optimization (IPDO-2007), (eds.: Dulikravich, G. S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 16-18, 2007.

7. Projectile Shape Optimization for Desired Target Damage (with Moral, J. R. and Vignjevic, R.), International Symposium on Inverse Problems, Design and Optimization (IPDO-2007), (eds.: Dulikravich, G. S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 16-18, 2007.

8. *Controlling Solidification of Particle Laden Melts Using Thermo-Magnetohydrodynamics and Optimization (with Colaco, M. J.), Symposium on Processing for Reliability, (ed: Mullins, W. M.), Materials Science & Technology 2006, Cincinnati, OH, October 15-19, 2006.

9. *Evolutionary Wavelet Neural Network for Large Scale Function Estimation in Optimization (with Sahoo, D.), AIAA Paper AIAA-2006-6955, 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, VA, September 6-8, 2006.

10. *Multi-Objective Hybrid Evolutionary Optimization With Automatic Switching (with Moral, R. J. and Sahoo, D.), AIAA Paper AIAA-2006-6976, 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, VA, September 6-8, 2006.

11. Inverse Approaches to Drying With and Without Shrinkage (with Kanevce, G., Kanevce, Lj., Mitrevski, V. and Orlande, H. R. B.), 15th International Drying Symposium (IDS 2006), Budapest, Hungary, August 20-23, 2006.

12. *Multi-Objective Design Optimization of Topology and Performance of Fractal Branching Networks of Cooling Passages, (with Gonzalez, M. J., Moral, R. J., Sahoo, D. and Martin, T. J. M.), ASME paper ICNMM2006-96151, ASME Fourth International Conference on Nanochannels, Microchannels and Minichannels, (eds.: Kandlikar, S.) University of Limerick, Limerick, Ireland, June 19-21, 2006.

13. Evolutionary Optimization of Chemistry of Bulk Metallic Glasses (with Egorov, I. N. and Jelisavcic, N.), III European Conference on Computational Solid and Structural Mechanics (eds: Mota Soares, C. A., Martins, J.A.C., Rodrigues, H.C., Ambrosio, J.A.C., Pina, C.A.B., Mota Soares, C.M., Pereira, E.R.B. and Folgado, J.), Springer, Lisbon, Portugal, June 5-8, 2006.

14. *Optimizing Chemistry of Bulk Metallic Glasses for Improved Thermal Stability (with Egorov, I. N.), Symposium on Bulk Metallic Glasses, TMS 2006 Annual Meeting & Exhibition, eds: Liaw, P. K. and Buchanan, R. A., San Antonio, TX, March 12-16, 2006.

15. Magnetohydrodynamic Optimization of the Fluid Flow During Solidification of Binary Mixtures in Enclosures (with Colaco, M. J.), 18^th International Congress of Mechanical Engineering, Ouro Preto, Mato Groso, Brazil, November 6-11, 2005.

16. *Design Optimization of Networks of Cooling Passages (with Jelisavcic, N., Martin, T.J., Moral, R., Sahoo, D. and Gonzalez, M.), ASME paper IMECE2005-79175, ASME IMECE, Orlando, FL, November 5-11, 2005.

17. *Design of Alloy’s Concentrations for Optimized Strength, Temperature, Time-to-Rupture, Cost and Weight (with Egorov, I. N.), Sixth International Special Emphasis Symposium on Superalloys 718, 625, 706 and Derivatives, eds: Loria, E. A., TMS Publications, Pittsburgh, PA, October 2-5, 2005, pp. 419-428.

18. Aero-Thermal-Elasticity-Materials Optimization of Cooled Gas Turbine Blades: Summary (with Martin, T. J., Dennis, B. H. and Egorov, I. N.), EUROGEN 05 - Evolutionary and Deterministic Methods for Design, Optimisation and Control with Applications to Industrial and Societal Problems, (eds: R. Schilling, W. Haase, J. Periaux, H. Baier, G. Bugeda), Munich, Germany, September 12-14, 2005.

19. *A Multi-Objective Evolutionary Hybrid Optimizer (with Moral, R. and Sahoo, D.), EUROGEN 05 - Evolutionary and Deterministic Methods for Design, Optimisation and Control with Applications to Industrial and Societal Problems, (eds: R. Schilling, W. Haase, J. Periaux, H. Baier, G. Bugeda), Munich, Germany, September 12-14, 2005.

20. Self-Adapting Response Surface Optimization of Alloying Elements Concentrations for Specified Strength, Temperature, Time-to-Rupture, Cost and Weight (with Egorov, I. N.), Advances in Computational Mechanics and Optimization: Symposium in honor of Prof. Subrata Mukherjee's 60th birthday, 8^th National Congress of Computational Mechanics, Austin, TX, July 25-27, 2005.

21. Energetics and Dynamical Pathways of Dislocation Cross-slip in Copper (with Pendurti, S., Lee, I.-H., and Jun, S.), 8^th National Congress of Computational Mechanics, Austin, TX, July 25-27, 2005.

22. *Estimation of Spatially and Time Dependent Source Term in a Two-Region Problem (with Silva, P. P., Orlande, H. R. B., Colaco, M. J., Shiakolas, P. S.), 5^th International Conference on Inverse Problems in Engineering: Theory and Practice, (ed. Lesnic, D.), Cambridge, U.K., July 11-15, 2005.

23. *Inverse Approaches to Drying of Bodies With Significant Shrinkage Effects (with G. H. Kanevce, L. P. Kanevce, V. B. Mitrevski, H.R.B. Orlande), 5^th International Conference on Inverse Problems in Engineering: Theory and Practice, (ed. Lesnic, D.), Cambridge, UK, July 11-15, 2005.

24. Robust Optimization of Concentrations of Alloying Elements in Steel for Maximum Temperature, Strength, Time-to-Rupture and Minimum Cost and Weight (with Yegorov-Egorov, I. N.), Invited Lecture, ECCOMAS – Computational Methods for Coupled Problems in Science and Engineering, (eds: Papadrakakis, M., Onate, E., Schrefler, B.), Fira, Santorini Island, Greece, May 25-28, 2005.

25. Obtaining Pre-Specified Concentration Profiles in Thermosolutal Flows by Applying Magnetic Fields Having Optimized Intensity Distribution (with Colaco, M. J.), Invited Lecture, ECCOMAS – Computational Methods for Coupled Problems in Science and Engineering, (eds: Papadrakakis, M., Onate, E., Schrefler, B.), Fira, Santorini Island, Greece, May 25-28, 2005.

26. A Multilevel Hybrid Optimization of Magnetohydrodynamic Problems in Double-Diffusive Fluid Flow (with Colaco, M. J.), SMEC 2005 Conference (ed: Saxena, S.), Miami Beach, FL, April 17-21, 2005.

27. Inverse and Optimization Problems in Heat Transfer (with Colaco, M. J. and Orlande, H.R.B.), Invited Lecture, 10th Brazilian Congress of Thermal Sciences and Engineering – ENCIT2004, Rio de Janeiro, RJ, Brazil, November 29 - December 3, 2004.

28. Aero-Thermal-Elasticity-Materials Optimization of Cooled Gas Turbine Blades: Part I (with Martin, T. J., Dennis, B. H. and Egorov, I. N.), in Lecture Series on Numerical Optimization Methods & Tools for Multi-Criteria/Multi-Disciplinary Design with Applications to Aeronautics and Turbomachinery, Von Karman Institute for Fluid Dynamics, Belgium, November 15 – 19, 2004.

29. Aero-Thermal-Elasticity-Materials Optimization of Cooled Gas Turbine Blades: Part II (with Martin, T. J., Dennis, B. H. and Egorov, I. N.), in Lecture Series on Numerical Optimization Methods & Tools for Multi-Criteria/Multi-Disciplinary Design with Applications to Aeronautics and Turbomachinery, Von Karman Institute for Fluid Dynamics, Belgium, November 15 – 19, 2004.

30. Inverse Determination of Steady Boundary Conditions in Heat Transfer and Elasticity (with Dennis, B. H., Martin, T. J.), Invited Lecture, mini-symposium on “Inverse Problems in Engineering Mechanics”, 6^th World Congress on Computational Mechanics, Beijing, China, Sept. 5-10, 2004.

31. Control of Flow Separation Over a Circular Cylinder With Electro-Magnetic Fields: Numerical Simulation, (with Dennis, B. H. and Yoshimura, S.), Invited Lecture, mini-symposium on “Computational Electro-magneto-hydro-dynamics”, 6^th World Congress on Computational Mechanics, Beijing, China, Sept. 5-10, 2004.

32. *Optimization of Alloy Chemistry for Maximum Stress and Time-to-Rupture at High Temperature (with Yegorov-Egorov, I. N.), paper AIAA-2004-4348, 10^th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany, NY, Aug. 30 – Sept. 1, 2004.

33. Convective Heat Transfer Control Using Magnetic and Electric Fields (with Colaco, M. J.), Keynote Lecture, International Thermal Science Seminar - ITSS II, ASME-ICHMT-ZSIS, (eds: Bergles, A. E., Golobic, I., Amon, C. H. and Bejan, A.), Bled, Slovenia, June 13-16, 2004, pp. 133-144.

34. *Inverse Problem of Aircraft Structural Parameter Estimation: Application of Neural Networks, (with Trivailo, P., Sgarioto, D. and Gilbert, T.), International Symposium on Inverse Problems, Design and Optimization – IPDO, Vol. II, (eds.: Colaço, M.J., Dulikravich, G. S. and Orlande, H.R.B.), Rio de Janeiro, Brazil, March 17-19, 2004, pp. 330-337.

35. *Inverse Design of Alloys for Specified Stress, Temperature and Time-to-Rupture by Using Stochastic Optimization (with Yegorov-Egorov, I. N.), International Symposium on Inverse Problems, Design and Optimization – IPDO, (eds: Colaco, M. J., Dulikravich, G. S. and Orlande, H. R. B.), Rio de Janeiro, Brazil, March 17-19, 2004.

36. *Aerodynamic Data Modeling Using Support Vector Machines (with Fan, H.-Y. and and Han, Z.-X.), AIAA paper 03-13510, AIAA Aerospace Sciences Meeting, Reno, NV, January 10-13, 2004.

37. *Determination of Temperatures and Heat Fluxes on Surfaces and Interfaces of Multi-domain Three-Dimensional Electronic Components (with Dennis, B. H. and Han, Z.-X.), ASME paper IMECE2003-42273, Symposium on Cooling of Microlectronics, MEMS, Photonics, and Nano Devices, ASME IMECE 2003, Washington, DC, November 16-21, 2003.

38. *Optimization of Wall Electrodes for Electro-Hydrodynamic Control of Natural Convection Effects During Solidification (with Colaco, M. J. and Martin, T. J.), ASME paper IMECE2003-41703, ASME IMECE 2003, Washington, DC, November 16-21, 2003.

39. *An Analytical Model of Phase Changing Chemically Reacting Flows (with Colaco, M. J.), ASME paper IMECE2003-41702, ASME IMECE 2003, Washington, DC, November 16-21, 2003.

40. *A Comparison of Two Solution Techniques for the Inverse Problem of Simultaneously Estimating the Spatial Variations of Diffusion Coefficients and Source Terms (with Rodrigues, F. and Colaco, M. J. and Orlande, H. R. B.), ASME paper IMECE2003-42058, ASME IMECE 2003, Washington, DC, November 16-21, 2003.

41. *Improvements to Mutation Donor of Differential Evolution (with Fan, H.-Y. and Lampinen, J.), EUROGEN2003 - International Congress on Evolutionary Methods for Design, Optimization and Control with Applications to Industrial Problems, (eds: G. Bugeda, J. A- Désidéri, J. Periaux, M. Schoenauer and G. Winter), CIMNE, Barcelona, Spain, September 15-17, 2003.

42. Reducing Convection Effects in Solidification by Applying Magnetic Fields Having Optimized Intensity Distribution (with Colaco, M. J. and Martin, T. J.), Keynote Lecture, ASME paper HT2003-47308, ASME Summer Heat Transfer Conference, Las Vegas, NV, July 21-23, 2003.

43. *An Inverse Method for Drying Processes at High Mass Transfer Biot Number (with Kanevce, G. and Kanevce, Lj.), ASME paper HT2003-40146, ASME Summer Heat Transfer Conference, Las Vegas, NV, July 21-23, 2003.

44. *Inverse Determination of Eroded Smelter Wall Thickness Variation Using an Elastic Membrane Concept (with Baker, D. P., Dennis, B. H. and Martin, T. J.), ASME paper HT2003-47307, ASME Summer Heat Transfer Conference, Las Vegas, NV, July 21-23, 2003.

45. *Optimization of Perfusion Freezing Protocols for Preservation of Three-Dimensional Organs (with Dennis, B. H.), 2003 Bioengineering Summer Conference, Key Biscayne, FL, June 26-31, 2003.

46. *Optimization of a Large Number of Coolant Passages Located Close to the Surface of a Turbine Blade (with Dennis, B. H., Egorov, I. N. and Yoshimura, S.), ASME paper GT2003-38051, ASME Turbo Expo 2003, Atlanta, GA, June 16-19, 2003.

47. *Parallel Thermoelasticity Optimization of 3-D Serpentine Cooling Passages in Turbine Blades (with Dennis, B. H., Egorov, I. N., Sobieczky, H. and Yoshimura, S.), ASME paper GT2003-38180, ASME Turbo Expo 2003, Atlanta, GA, June 16-19, 2003.

48. Calibration of Microprocessor Control Systems for Specified Levels of Engine Exhaust Toxicity (with Egorov, I. N.), 2003 JUMV Conference - Science and Motor Vehicles, (ed: Duboka, C.), Belgrade, Serbia and Montenegro, May 27-28, 2003.

49. Brain Cooling Strategies: Numerical Simulations on a Realistic Human Head Geometry (with Dennis, B. H., Eberhart, R. C. and Radons, S. W.), 5^th International Conference on Simulations in Biomedicine, Ljubljana, Slovenia, April 2-4, 2003.

50. *Semi-Stochastic Optimization of Chemical Composition of High-Temperature Austenitic Steels for Desired Mechanical Properties (with Egorov, I. N., Sikka, V. K. and Muralidharan, G.), 2003 TMS Annual Meeting, Yazawa International Symposium: Processing and Technologies, TMS Publication, (eds: Kongoli, F., Itakagi, K., Yamaguchi, C. and Sohn, H.-Y.), Vol. 1, pp. 801-814, San Diego, CA, March 2-6, 2003.

51. Optimization of Intensities and Orientations of Magnets Controlling Melt Flow During Solidification (with Colaco, J. M., Dennis, B. H., Martin, T. J. and Lee, S.), Symposium on Materials Processing Under the Influence of Electrical and Magnetic Fields, 2003 TMS Annual Meeting, San Diego, CA, March 2-6, 2003.

52. Magnetized Fiber Orientation and Concentration Control in Solidifying Composites (with Colaco, M., Martin, T. J. and Lee, S.), Symposium on Materials Processing Under the Influence of Electrical and Magnetic Fields, 2003 TMS Annual Meeting, San Diego, CA, March 2-6, 2003.

53. Non-Destructive Inverse Determination of Refractory Wall Material Wear Configurations in Melting Furnaces (with Baker, D. P., Martin, T. J. and Dennis, B.H.), 2003 TMS Annual Meeting, San Diego, CA, March 2-6, 2003.

54. Estimation of Thermophysical Properties of a Drying Body at High Mass Transfer Biot Number (with Kanevce, G. and Kanevce, Lj.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’03, (ed: Tanaka, M.), Nagano, Japan, February 18-21, 2003, Elsevier, pp. 13-20.

55. *Inverse Determination of Smelter Wall Erosion Shapes Using a Fourier Series Method (with Baker, D. P. and Martin, T. J.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’03, (ed: Tanaka, M.), Nagano, Japan, February 18-21, 2003,Elsevier, pp. 231-240.

56. *Finite Element Simulation of Cooling of 3-D Human Head and Neck (with Dennis, B. H., Eberhart, R. C. and Radons, S. W.), ASME IMECE 2002, paper IMECE2002-HT-32045, New Orleans, LA, November 17-22, 2002.

57. Simultaneous Estimation of Spatially-Dependent Diffusion Coefficient and Source Term in Nonlinear 1-D Diffusion (with Rodrigues, F. A. and Orlande, H. R. B.), Workshop on Inverse Obstacle Problems, Lisbon, Portugal, November 4-6, 2002.

58. *Implicit and Explicit Sensitivities for Optimization of Cooled Turbine Blades (with Martin, T. J.), 9th AIAA/ISSMO Multidisciplinary Analysis & Optimization Symposium, paper AIAA-2002-5435, Atlanta, GA, Sept. 4-6, 2002.

59. A 3-D Finite Element Formulation for the Determination of Unknown Boundary Conditions for Steady Thermoelastic Problems (with Dennis, B. H. and Yoshimura, S.), Keynote Lecture, mini-symposium on “Computational Treatment of Inverse Problems in Mechanics” at the 5th World Congress on Computational Mechanics (WCCM-V), Vienna, Austria, July 7 – 12, 2002.

60. Multi-Disciplinary Hybrid and Evolutionary Optimization (with Dennis, B. H., Martin, T. J. and Egorov, I. N.), Invited Lecture, minisymposium on “Evolutionary Algorithms in Engineering Optimization”, at the 5th World Congress on Computational Mechanics (WCCM-V), Vienna, Austria, July 7 – 12, 2002.

61. Parameterized Structures for Inverse Design and Optimization (with Sobieczky, H. and Dennis, B. H.), 4th International Conference on Inverse Problems in Engineering: Theory and Practice (4icipe), Angra dos Reis, Brazil, May 26-31, 2002.

62. Estimation of Drying Food Thermophysical Properties by Using Temperature Measurements (with Kanevce, Lj. and Kanevce, G. H.), 4th International Conference on Inverse Problems in Engineering: Theory and Practice (4icipe), Angra dos Reis, Brazil, May 26-31, 2002.

63. Estimation of Thermophysical Properties of Moist Materials Under Different Drying Conditions (with Kanevce, G. H., Kanevce, Lj. and Orlande, H. R. B.), 4th International Conference on Inverse Problems in Engineering: Theory and Practice (4icipe), Angra dos Reis, Brazil, May 26-31, 2002.

64. *Rotor Cascade Shape Optimization With Unsteady Passing Wakes Using Implicit Dual Time Stepping and Genetic Algorithm (with Lee, E.-S. and Dennis, B. H.), ASME ISROMAC-9 Conference, Hawaii, February 10-14, 2002.

65. *Inverse Determination of Steady Surface Temperatures and Heat Fluxes on Arbitrary 3-D Objects (with Dennis, B. H.), paper ASME IMECE2001/HTD-24310, New York, November 11-16, 2001.

66. *Analysis and Multi-disciplinary Optimization of Internal Coolant Networks in Turbine Blades (with Martin, T. J.), paper ASME IMECE2001/HTD-24316, New York, November 11-16, 2001.

67. Multi-disciplinary Design Optimization (with Dennis, B. H., Martin, T. J. and Egorov, I. N.), Invited Lecture, EUROGEN 2001 - Evolutionary Methods for Design, Optimization and Control with Applications to Industrial Problems, (ed.: Giannakoglou, K., Tsahalis, D. T., Periaux, J. and Fogarty, T.), Athens, Greece, Sept. 19-21, 2001, Published by International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp. 11-18.

68. Multi-disciplinary Analysis and Design Optimization (with Dennis, B. H., Martin, T. J. and Egorov, I. N.), Invited Lecture, Mini-Symposium on Inverse Problems - State of the Art and Future Trends, XXIV Brazilian Congress on Applied and Computational Mathematics, Sept. 10-13, 2001, Belo Horizonte, Brazil.

69. Multi-disciplinary Inverse Design (with Martin, T. J. and Dennis, B. H.), Invited Lecture, Mini-Symposium on Inverse Problems - State of the Art and Future Trends, XXIV Brazilian Congress on Applied and Computational Mathematics, Sept. 10-13, 2001, Belo Horizonte, Brazil.

70. Stokes’ Hypothesis and Compression Shock Structure, Proceedings of 23^rd International Symposium on Shock Waves,(ed. Lu, F. and Wilson, D.), Fort Worth, Texas, July 23-27, 2001, pp. 158.

71. *Magnetic Field Suppression of Melt Flow in Crystal Growth (with Dennis, B. H.), International Symposium on Advances in Computational Heat Transfer - CHT’01, (eds.: de Vahl Davis, G. and Leonardi, E.), Palm Cove, Queensland, Australia, May 20-25, 2001, Begell House, Inc., New York, Vol. 2, pp. 1145-1152.

72. *Simultaneous Estimation of Thermophysical Properties and Heat and Mass Transfer Coefficients of a Drying Body (with Kanevce, G. H. and Kanevce, Lj.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’01, (eds: Tanaka, M. and Dulikravich, G. S.), Nagano, Japan, February 6-9, 2001, Elsevier, Amsterdam, pp. 3-12.

73. *A 3-D Finite Element Formulation for the Determination of Unknown Boundary Conditions in Heat Conduction (with Dennis, B. H.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’01, (eds: Tanaka, M. and Dulikravich, G. S.), Nagano, Japan, February 6-9, 2001.

74. *Electromagnetohydrodynamics (EMHD): Numerical Experiments in Steady Planar Flows (with Dennis, B. H.), Symposium on Recent Advances in the Mechanics of Structured Continua, (eds: Massoudi, M. and Rajagopal, K. R.), ASME IMECE 2K, Orlando, FL, Nov. 5-10, 2000, AMD-Vol. 244/MD.-Vol. 92, pp. 17-24.

75. *Optimization of Organ Freezing Protocols With Specified Allowable Thermal Stress Levels (with Dennis, B. H. and Rabin, Y.), Symposium on Advances in Heat and Mass Transfer in Biotechnology, (eds: Scott, E. P. and Bischof, J. C.), ASME IMECE 2K, Orlando, FL, Nov. 5-10, 2000, HTD-Vol. 368/BED-Vol. 47, pp. 33-48.

76. *Simulation of Magnetohydrodynamics With Conjugate Heat Transfer (with Dennis, B. H.), ECCOMAS2000 (European Congress on Computational Methods in Applied Sciences and Engineering), (ed: Onate, E., Bugeda, G. and Suarez, B.), Barcelona, Spain, September 11-14, 2000.

77. Inverse Design and Optimization Using CFD (with Dennis, B. H.), Session on Contributions to Automated Design Using CFD, ECCOMAS2000 European Congress on Computational Methods in Applied Sciences and Engineering, (eds: Onate, E., Bugeda, G. and Suarez, B.), Barcelona, Spain, September 11-14, 2000, pp. 595.

78. *Multi-Objective Optimization of Turbomachinery Cascades for Minimum Loss, Maximum Loading, and Maximum Gap-to-Chord Ratio (with Dennis, B. H., Egorov, I. N., Han, Z.-X., and Poloni, C.), AIAA Paper 2000-4876, 8^th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA, September 6-8, 2000.

79. *Moisture Diffusivity Estimation from Temperature Measurements: Influence of Measurement Accuracy (with Kanevce, G. H., Kanevce, Lj. P. and Mitrevski, V. B.), 12^th International Drying Symposium (IDS2000), Noordwijkerhout, The Netherlands, August 28-31, 2000.

80. Heat Transfer, Inverse Problems, and Multidisciplinary Design Optimization (with Martin, T. J. and Dennis. B. H.), Proceedings of a Conference of International Society for Computational Engineering & Sciences (ISCES), Los Angeles, CA, August 21-25, 2000, (editors: Atlury, S. N. and Brust, F. W.), Vol. I, Tech Science Press, pp. 868-873.

81. *Influence of Boundary Conditions on Moisture Diffusivity Estimation by Temperature Response of a Drying Body (with Kanevce, G. H. and Kanevce, Lj. P.), ASME National Heat Transfer Conference, Pittsburgh, PA, August 20-22, 2000, ASME paper NHTC2000-12296.

82. *Inverse Determination of Temperature-Dependent Thermal Conductivity Using Steady Surface Data on Arbitrary Objects (with Martin, T. J.), Symposium on Inverse Thermal Problems, ASME National Heat Transfer Conference, (editors: G. S. Dulikravich, K. Woodbury and B. F. Blackwell), Pittsburgh, PA, August 20-22, 2000, ASME paper NHTC2000-12038.

83. *Simulation of Electro-Magneto-Hydro-Dynamics (EMHD) with p-Version Least-Squares Finite Element Method (with Dennis, B. H.), International Conference on Finite Elements in Flow Problems 2000, Austin, TX, April 30 - May 4, 2000.

84. *Determination of Unsteady Container Temperatures During Freezing of Three-dimensional Organs With Constrained Thermal Stresses (with Dennis, B. H.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’2k, (editors: M. Tanaka and G. S. Dulikravich), Nagano, Japan, March 7-10, 2000, Elsevier Science Ltd, Amsterdam, pp. 139-148.

85. *Moisture Diffusivity Estimation by Temperature Response of a Drying Body (with Kanevce, G. H. and Kanevce, Lj. P.), International Symposium on Inverse Problems in Engineering Mechanics – ISIP’2k, (editors: M. Tanaka and G. S. Dulikravich), Nagano, Japan, March 7-10, 2000, Elsevier Science Ltd, Amsterdam, pp. 43-52.