|
|
 |
|
|
Professor
Department of Mechanical and Materials Engineering
Florida International University
10555 West Flagler St., EC 3474
Miami, Florida 33174
(305) 348-7016 (office phone)
(954) 554-0368 (mobile phone)
(305) 348-6007 (FAX)
dulikrav@fiu.edu(E-mail)
http://maidroc.fiu.edu
http://www.eng.fiu.edu/mme/
http://www.tandf.co.uk/journals/titles/17415977.asp
http://www.ISIPSE.net
Resume |
| |
|
Professor
George
S.
Dulikravich
has authored and co-authored over 390 technical publications in diverse
fields involving computational and analytical fluid mechanics,
subsonic, transonic and hypersonic aerodynamics, theoretical and
computational electro-magneto-hydrodynamics, conjugate heat transfer
including solidification, computational cryobiology, acceleration of
iterative algorithms, computational grid generation, multi-disciplinary
aero-thermo-structural inverse problems, design and constrained
optimization in turbomachinery, and multi-objective optimization of
chemical compositions of alloys. He is the founder and Editor-in-Chief
of the international journal on Inverse Problems in Science and
Engineering (founded in 1994) and an Associate Editor of seven
additional journals. He is also the founder, chairman and editor of the
sequence of International Conferences on Inverse Design Concepts and
Optimization in Engineering Sciences (ICIDES) and International
Symposium on Inverse Problems, Design and Optimization (IPDO).
Professor Dulikravich is a Fellow of the American Academy of Mechanics,
Fellow of the American Society of Mechanical Engineers, and an
Associate Fellow of the American Institute of Aeronautics and
Astronautics. Professor Dulikravich was a member of the Texas Institute
for Computational Mechanics (TICOM) at the University of Texas at
Austin and a member of the Center for Space Propulsion and the Center
for Gas Turbines and Power at the Pennsylvania State University. He is
the founder of the interdepartmental Multidisciplinary Analysis,
Inverse Design and Optimization (MAIDO) Institute at the University of
Texas at Arlington and the founder of Multidisciplinary Analysis,
Inverse Design, Robust Optimization and Control (MAIDROC) Laboratory at
Florida International University. In the summer of 2008, Prof.
Dulikravich co-founded the International Society for Inverse Problems
in Science and Engineering (ISIPSE) which has over 330 registered
members.
|
Citizenship
Education
Areas Of
Expertise
Research
Experience
Teaching
Experience
Journal
Editorships
Membership In
Professional Societies
Honors And Awards
Undergraduate
Courses Taught
Graduate Courses
Taught
Short Courses
Lectured
Ph. D. Students
Supervised
M. Sc. Students
Supervised
Undergraduate Honors
Thesis Supervised
Visiting
Scholars Hosted And Supervised
Member of Ph. D.
Dissertation Committee
Members of M. Sc.
Thesis Committee
Professional Society
Administrative Activities
Edited Book
Volumes
Book Chapters
Papers In
Refereed Journals
Journal
Articles And Chapters In Press
Publications
Submitted For Review
Papers In
Conference Proceedings
Individual
Technical Papers Not Bound In Proceedings
Technical Reports
Published
Book Reviews
Other
Technical Publications
|
|
Optimization
of serpentine cooling passage in a gas turbine blade. Objective is to
smooth and lower the initially
non uniform surface temperature.
(refresh browser to see animated sequence) |
| |
|
CITIZENSHIP
U.
S.
A.
EDUCATION
- Ph.D. Cornell University, Ithaca, NY
- (Aerospace Engineering and
Applied Mathematics) 9/75 - 1/79
- M.Sc. University of Minnesota,
Minneapolis, MN
- (Aeronautical Engineering and
Theoretical Mechanics)
8/74 - 6/75
- Dipl. Ing. University of Belgrade,
Belgrade, Yugoslavia
- (Aeronautical and Mechanical
Engineering) 10/68 -
5/73
- Dipl. Mech. Tech. Technical School
"Nikola Tesla", Pancevo, Yugoslavia
- (Mechanical Engineering) 9/64 -
5/68
- P.E. Registered Professional
Engineer, Texas
AREAS
OF
EXPERTISE
- Multi-Disciplinary
(Aero-Thermo-Structural-Electro-Magnetics) Analysis, Inverse Design,
and Optimization
- Turbomachinery Aerodynamics, Heat
Transfer, and
Elasticity Simulation, Inverse Design and Optimization
- Electro-Magneto-Hydrodynamic Flow
and Solidification Modeling,
Simulation, and Design Optimization
- Hybrid Single-Objective and
Multi-Objective Optimization Algorithms and Response Surface Metamodels
- Multi-Objective Evolutionary Design
Optimization of Chemical
Compositions of Alloys Methods for Acceleration of Iterative Algorithms
for the Solution of Systems of Partial Differential Equations
- Computational Simulation and
Optimization of Cryopreservation Protocols
RESEARCH
EXPERIENCE
- Founder and Director
- Multidisciplinary Analysis,
Inverse Design, Robust Optimization and
Control (MAIDROC) Laboratory
- Florida International
University, Miami,
FL (02/04-present)
- Founder and Director
- Multidisciplinary Analysis,
Inverse Design and Optimization (MAIDO)
Institute
- University of Texas at
Arlington, Arlington, TX
(10/02-12/03)
- Senior Visiting Research Scientist
- ICOMP
- NASA Lewis Research Center/Case
Western Reserve Univ., Cleveland,
OH (5/87; 5/88)
- Visiting Research Scientist
- DFVLR-AVA
- Institut fuer Theoretische
Stroemungsmechanik, Goettingen,
Germany (7/80-10/80; 5/82; 7/83; 6/84)
- Visiting Research Scientist
- Universities Space Research
Association
- NASA Lewis Research Center,
Cleveland, OH (11/80-05/82)
- Research Associate
- National
Research Council
- NASA Lewis Research Center,
Cleveland, OH
(6/79-7/80)
- Graduate Research Assistant
- Department of Mechanical and
Aerospace Engineering
- Cornell University,
Ithaca, NY (7/76-8/76; 1/77-9/78)
TEACHING
EXPERIENCE
-
Full
Professor
- Department of Mechanical and
Materials Engineering
- Florida
International University, Miami, FL (8/03 – present)
- Full Professor and Chairman
- Department of Mechanical and
Materials Engineering
- Florida
International University, Miami, FL (8/03 - 7/09)
- Graduate Student Advisor -
Aerospace Program
- Department of Mechanical and
Aerospace Engineering,
- The University of Texas at
Arlington, Arlington, TX (7/02-8/03)
- Full Professor
- Department of
Mechanical and Aerospace Engineering,
- The University of Texas at
Arlington, Arlington, TX (7/99-12/03)
- Adjunct Professor
- Department of
Aerospace Engineering,
- The Pennsylvania State
University,
University Park, PA (8/99-12/00)
- Visiting Professor
- University of Novi Sad, Novi
Sad, Yugoslavia (5/96-6/96)
- Visiting Professor
- School of
Science and Technology
- Teikyo University, Utsunomiya,
Japan
(7/95-8/95)
- Associate Professor
- Department of
Aerospace Engineering,
- The Pennsylvania State
University,
University Park, PA (1/86-7/99)
- Assistant Professor
- Department of
Aerospace Engineering and Engineering Mechanics,
- The University of Texas at
Austin,
Austin, TX (9/82-1/86)
- Graduate Teaching Assistant
- Department of Mechanical and
Aerospace Engineering,
- Cornell University (9/75-6/76;
9/76-1/77; 9/78-1/79)
- Graduate Teaching Assistant
- Department of Aeronautical
Engineering and Theoretical Mechanics,
- University of Minnesota
(9/74-6/75)
JOURNAL
EDITORSHIPS
MEMBERSHIP
IN
PROFESSIONAL
SOCIETIES
- Fellow
- American Academy of
Mechanics
- Fellow
- American Society of
Mechanical Engineers
- Fellow
- Royal Aeronautical Society
- Associate Fellow
- American Institute
of Aeronautics and Astronautics
- Co-Founder
- International Society
for Inverse Problems in Science and Engineering
- (ISIPSE no. 1 since
July 1, 2008)
- Member
- Minerals, Metals &
Materials Society
- Member
- The Materials Information
Society
- (ASM no. 527156 since Dec. 14,
2006)
- Member
- International Association
for Hydromagnetic Phenomena and Applications (HYDROMAG)
HONORS
AND AWARDS
- Eminent Engineer Award - Tau Beta
Pi National Engineers’ Honor Society (12/06)
- Eli Carafoli Award and
Commemorative Medal, Politechnica, Bucharest, Romania (10/01)
- ALCOA Foundation Faculty Research
Fellow Award (7/96-6/97; 7/97-6/98)
- William J. Murray, Jr. Fellowship
in Engineering #1, University of Texas at Austin (9/85-1/86)
- NASA - National Research Council
Postdoctoral Research Associateship and Travel Grant (1979)
- Sigma Xi - The Scientific Research
Honor Society of North America (1979)
- Sigma Gamma Tau - National Honor
Society for Aerospace Engineers (1975)
- International Institute for
Education (IIE) - Fulbright Travel Grant (1974)
- IAESTE Program - Thune/Eureka Co.,
Norway (1971)
UNDERGRADUATE
COURSES
TAUGHT
- Propulsion
- Aerodynamics I
- Aerodynamics II
- Compressible Flow
- Aerospace Analysis
- Thermal Engineering
- Transport Phenomena
- Inverse Design (new elective
course developed)
- Introduction to Fluid Mechanics
(honors course)
- Physical Gasdynamics (elective
course reorganized)
- Aerodynamic Shape Design (new
elective course developed)
- Airfoil, Wing, and Propeller
Design (new elective course developed)
- Introductory Computational
Fluid Dynamics (elective course reorganized)
- Introduction to Computational
Thermo Fluids (course reorganized)
GRADUATE
COURSES
TAUGHT
- Inverse Design (new course
developed)
- Dynamics of Ideal Fluids
- Low Speed Aerodynamics
- High Temperature Gasdynamics
- Intermediate Fluid Mechanics
- Theoretical Gas Dynamics (course
reorganized)
- Advanced Fluid Dynamics (course
reorganized)
- Foundations of Fluid Mechanics
(course reorganized)
- Physics of Compressible Fluids
(new course developed)
- Advanced Computational
Aerodynamics (new course developed)
- Multidisciplinary Inverse
Design & Optimization (new course developed)
- Grid Generation, Fast
Algorithms, and Inverse Design (new course developed)
- Multiphase Flows and
Electro-Magneto-Hydrodynamics (new course developed)
- Mechanical Design Optimization
(course reorganized)
- Computational Fluid Dynamics
(course reorganized)
SHORT
COURSES
LECTURED
- Aero-thermal-elasticity-materials
Optimization of Cooled Gas Turbine Blades - a Lecture Series on
Numerical Optimization Methods & Tools for
Multi-criteria/Multi-Disciplinary Design with Applications to
Aeronautics and Turbomachinery, von Karman Institute for Fluid
Dynamics, Belgium, November 15 - 19, 2004.
- Analysis, Inverse Design and
Optimization in Turbomachinery - A workshop in the Mechanical
Engineering Department, University of Belgrade, Belgrade, Serbia and
Montenegro, May 22, 2003.
- Multidisciplinary Analysis, Inverse
Design and Optimization - A workshop in the Mechanics Department,
Mathematics Faculty, University of Belgrade, Belgrade, Serbia and
Montenegro, May 19-21, 2003.
- Recent Advances in Gas Turbine
Cooling Techniques - A workshop in the Mechanical Engineering
Department, Federal University of Rio de Janeiro (EE/COPPE/UFRJ), Rio
de Janeiro, Brazil, February 12-13, 2003.
- EUROGEN’99 - A Short Course on
Evolutionary Algorithms in Engineering and Computer Science: Recent
Advances and Industrial Applications, Jyvaskyla, Finland, May 30-June
3, 1999.
- Genetic Algorithms Workshop and
Tutorial, organizer and one of five lecturers, Applied Research
Laboratory - The Pennsylvania State Engineering, October 8-9, 1998.
- Methods for Acceleration of
Iterative Algorithms for Systems of Partial Differential Equations,
Institute for Mathematics, University of Novi Sad, Novi Sad,
Yugoslavia, May 19-31, 1996.
- New Design Concepts for High Speed
Air Transport, CISM Advanced School, Udine, Italy, June 5-9, 1995.
- Computational Fluid Dynamics and
Heat Transfer, Turboinstitut, Ljubljana, Yugoslavia, May 27-31, 1990.
- AGARD/FDP Specialists Workshop on
Inverse Methods for Airfoil Design for Aeronautical and Turbomachinery
Applications, VKI, Chateau St. Dennise, Brussels, May 14-18, 1990.
- Inverse Design in Turbomachinery,
United Technologies Res. Center, East Hartford, CT, March 30, 1988.
- Transonic Flow Computations,
Institute for Theoretical Physics, Zemun, Yugoslavia, August 3-4, 1987.
- Computational Fluid Dynamics,
Technical University of Rijeka, Yugoslavia, July 20-24, 1987.
Ph.
D. STUDENTS SUPERVISED
Florida International University
- Ramon J. Moral: "Hybrid
Multi-Objective Optimization and Hybridized Self-Organizing Response
Surface Method", August 2008.
- Seckin Gokaltun: "Combined
Boltzmann Lattice Method and Direct Simulation Monte Carlo Method for
Fluid Dynamics and Heat Transfer in Micro Channels", August 2008.
The Pennsylvania State University
- Thomas J. Martin:
"Computer-Automated Multi-Disciplinary Analysis and Design Optimization
of Internally Cooled Turbine Blades," May 2001.
- Brian H. Dennis: "Simulation and
Optimization of Electro-Magneto-Hydrodynamic Flows," December 2000.
- Eunseok Lee: "Optimization of
Turbomachinery Airfoil Shapes in Viscous Unsteady Compressible Flows,"
August 2000.
- Kwang-Yoon Choi:
"Sensitivity-Based Minimum Residual Methods for Convergence
Acceleration of Iterative Algorithms," December 1994.
- Seungsoo Lee: "Acceleration of
Iterative Algorithms for Euler and Navier-Stokes Equations," May 1990.
The University of Texas at Austin
- Stephen R. Kennon: "Numerical
Solution of Weak Forms of Conservation Laws on Optimal Unstructured
Triangular Grids," August 1987.
- Chung-Yuan Huang: "Optimization
of Explicit Time-Stepping Algorithms and Stream-Function-Coordinate
(SFC) Concept for Fluid Dynamics Problems," May 1987.
- Charles R. Olling:
"Viscous/Inviscid Interaction in Transonic Separated Flows Over Solid
and Porous Airfoils and Cascades," December 1985.
M. Sc.
STUDENTS SUPERVISED
Florida International University
- Amanda Vianna: “Control Algorithm
for Minimizing Response Time of a Pressure Wave Traveling in Hydraulic
Fluid Contained in a Long Rubber Hose With Axial Temperature
Variation”, expected December 2010.
- Edgard
Espinosa:
“Design
Optimization
of
Submerged
Jet
Nozzles
for
Enhanced
Fluid
Mixing
and
Bottom
Surface
Erosion”,
expected
August 2010.
- Naveen
Singamseti:
“Maximization
of
Surface-to-Volume
Ratio
of
Porous
Thin
Film
Electrodes
Subject
to
Thermoelastic
Stresses”,
expected
August
2010.
- Stephen
Wood:
“Inverse
Shape
Design
of
Branching
Air
Inlets
Delivering
Equal
Mass
Flow
Rates
to
Cylinders
of
an Internal Combustion Engine”,
expected August 2010.
- Alain
Hernandez:
“A
Variant
of
Boltzman
Lattice
Method
for
Computing
Flows
With
Heat
Transfer”,
expected
August
2010.
- Suvrat
Bhargava:
“A
Multiobjective
Design
Optimization
Method
for
Creating
New
Molecules
of
Refrigerant
Fluids”,
expected
August
2010.
- Carlos
Velez:
“Comparative
Multi-Objective
Composition
Optimization
and
Experimental
Evaluation
of
Hf-based
Bulk
Metallic
Glasses”,
expected
August
2010.
- Ricardo
Ardila:
“Multi-Objective
Optimization
of
Topology
and
Performance
of
Three-dimensional
Networks
of
Cooling
Passages”,
December
2009.
- Riken
R.
Patel
(co-advised
with
Prof.
Arvind
Agarwal):
“A
Computational
and
Experimental
Algorithm
for
Near
Net
Shape
Fabrication of Thin Walled
Ceramic Structure by Plasma Spray Forming”, August 2009.
- Souma
Chowdhury:
“Modified
Predator-Prey
(MPP)
Algorithm
for
Constrained
Single
–and
Multi-Objective
Optimization
Problems”,
December
2008.
- Alexandre
Aidov:
“Modified
Continuous
Ant
Colony
Algorithm
for
Function
Optimization”,
August
2008.
- Debasis
Sahoo:
“Wavelet-Based
Neural
Networks
for
Response
Surfaces
in
Multi-Objective
Evolutionary
Optimization”,
December
2005.
- Mickael
Gonzalez:
“Multi-Objective
Design
Optimization
of
Topology
and
Performance
of
Fractal
Branching
Networks
of
Cooling
Passages”,
December
2005.
- Nenad Jelisavcic: “Analysis and
Multi-Objective Optimization of Branching Channel Cooling Systems”,
August 2005.
The University of Texas at Arlington
- Ravi Krishnamurti: "Convergence
Acceleration of Inverse Design of Aerodynamic Configurations Using an
Elastic Membrane Concept Based on Fourier Series", May 2000.
The Pennsylvania State University
- Daniel P. Baker: "A Fourier
Series Approach to the Elastic Membrane Inverse Shape Design Problem in
Aerodynamics", May 1999.
- Craig Bates: "Forward and
Inverse Electro-Cardiographic Calculations on a Multidipole Model of
Human Cardiac Electrophysiology", August 1997.
- Brian H. Dennis: "A Software
Package for Thermoelastic Optimization With Application to the Design
of Internally Cooled Turbine Blades", August 1997.
- Norman F. Foster: "Shape
Optimization Using Genetic Evolution and Gradient Search Constrained
Algorithms," August 1995.
- Scott G. Sheffer: "Shape
Optimization of Three-dimensional Hypersonic Flight Vehicles for
Minimum Drag and Aerodynamic Heating," May 1993.
- Thomas J. Martin: "Inverse
Design and Optimization of Two-and-Three Dimensional Coolant Flow
Passages," May 1993.
- Branko Kosovic: "Inverse
Problems in Heat Transfer and Computation of Electrohydrodynamic and
Magnetohydrodynamic Flows Including Solidification," December 1991.
- Joel V. Madison: "Analysis and
Optimization of Objects Subject to Unsteady Heat Conduction," May 1988.
The University of Texas at Austin
- Yio-Wha Shau: "Comparative Study
of Numerical Dissipation in Transonic Potential Flow Calculations,"
January 1986.
- Ting-Lung Chiang: "Inverse
Design of Composite Multiholed Internally Cooled Turbine Blades,"
December 1985.
- Richard Carcaillet: "Generation
and Optimization of Flow Adaptive Computational Grids," August 1985.
- Tatsuo Fujinami: "Computation of
Unsteady Separated Compressible Flows Using Free Vortex Method," August
1985.
- David M. Sommerfield:
"Computational Grid Generation for Wing-Body-Tail-Fin-Stabilizer
Configurations," December 1984.
- Stephen R. Kennon: "Novel
Approaches to Computational Grid Generation, Inverse Design and
Acceleration of Iterative Schemes," May 1984.
UNDERGRADUATE
HONORS
THESIS
SUPERVISED
The Pennsylvania State University
- Daniel P. Baker: "A Graphically
Interactive Design Environment for Multicomponent Airfoils", Dept. of
Aerospace Engineering, May 1997.
- Craig Bates: "Inverse
Determination of Locations and Strengths of Electric Impulses Inside a
Human Heart Based on Chest Surface Measurements of Electric Potential",
Dept. of Eng. Science & Mechanics, May 1996.
- Chris Gross: "Feasibility Study
of a Magnetohydrodynamic Blood Pump", Dept. of Eng. Science &
Mechanics, May 1996.
- Jonathan D. Halderman: "The
Boundary Element Method Application to Elastostatics and Development of
a Two-dimensional Analysis Code", Dept. of Eng. Science and Mechanics,
May 1994 (Best Thesis Award).
- Brian Smith: "Computational Grid
Generation Using Optimization", Dept. of Eng. Science & Mechanics,
May 1994.
VISITING
SCHOLARS
HOSTED
AND
SUPERVISED
- Mr. Flavio Vianna (Petrobras,
Brazil), "Detection of the Location of Hydrides Formation in Pipelines
Using Inverse Heat Transfer and Bayesian Filters," (12/08-12/09).
- Ms. Priscila Ferreira Barbosa de
Sousa (Universidade Federal de Uberlandia, Brazil), "Inverse Problem
Applied to Bioengineering: Studies of Thermal Process during Bone
Drilling," (01/08-12/08).
- Prof. Marcelo J. Colaco,
(Military Institute, Rio de Janeiro, Brazil): "Multi-disciplinary
Design Optimization and Response Surface Formulation Concepts,"
(09/06-11/06; 01/08).
- Mrs. Dejana Herceg, Ph.D.
student (University of Novi Sad, Novi Sad, Serbia), "Optimization of
Electric Grid Topologies for a Balanced Load", (07/07)
- Prof. Andres Tremante, Senior
Visiting Scientist (Universidad Simon Bolivar, Venezuela):
"Multi-objective Evolutionary Optimization of Multi-phase Fluid Flow
and Heat Transfer", (8/05-8/06)
- Prof. William Annicchiarico,
Senior Visiting Scientist (Universidad Central de Venezuela, Caracas,
Venezuela): "Parallel Processing of FEM Codes for 3-D Elasticity
Analysis", (10/04; 08/06-12/07).
- Dr. Huiyuan Fan, Senior Visiting
Scientist (Technion, Haifa, Israel): "Multidisciplinary Optimization of
Combustion Chambers," (03/03-03/04).
- Prof. Helcio R. B. Orlande,
(Federal University of Rio de Janeiro, Brazil): "Inverse Determination
of Diffusion Coefficients in Unsteady Diffusion Models," (01/03-02/03;
02/07; 01/08-02/08).
- Dr. Marcelo J. Colaco,
Postdoctoral Fellow, (Federal University of Rio de Janeiro, Rio de
Janeiro, Brazil): "Multi-disciplinary Analysis and Design Optimization
of EMHD Controlled Solidification, Fuel Cells, and Cooled Turbine
Blades," (09/01-10/02; 09/06-11/06).
- Prof. Igor N. Yegorov, (Keldysh
Institute of Applied Mathematics, Russian Academy of Sciences, Moscow,
Russia): "Multiobjective Constrained Optimization," (01/00-02/00;
07/00; 04/03-08/03; 11/04-01/05).
- Mr. Valentino Pediroda,
Research Associate (University of Udine, Udine, Italy): "Benchmarking
of Multiobjective Constrained Optimization and Computational Fluid
Dynamics Software", (01/99-07/99).
- Prof. Milan V. Petrovic,
(University of Belgrade, Belgrade, Yugoslavia): "Aerodynamic
Optimization of Multistage Axial Flow Turbine Blade Rows Inlet/Exit
Parameters," (06/98-08/98).
- Prof. Zhen-Xue Han, (Beijing
University of Aeronautics and Astronautics, Beijing, P. R. China): "3-D
Aerodynamic Shape Optimization Using Navier-Stokes Codes on
Non-Structured Grids," (03/98-01/00).
- Prof. Hyung-Jong Ko, (Kumoh
National University of Technology, Kyungbuk, Korea): "Multidisciplinary
Inverse Design and Optimization Involving
Electro-Magneto-Hydrodynamics," (02/98-01/99).
- Dr. George Savu, Senior
Research Scientist (National Research Design Institute for
Turbomachinery COMOTI, Bucharest, Romania): "Turbulent and Transitional
Boundary Layer Models Without Adjustable Parameters," (10/97-12/97).
- Prof. Zhengming Wang, (Academia
Sinica, Institute for Engineering Thermophysics, Beijing, P. R. China):
"Turbomachinery Aerodynamic Shape Inverse Design Using Navier-Stokes
Equations," (01/94-07/94).
- Prof. Myong Hwan Sohn, (Dept.
of Aero. Eng., Air Force Academy, Choongbula-Do, Korea): "Aerodynamic
Shape Inverse Design and Optimization," (08/93-08/94).
- Prof. Xiuying Li, (Dept. of
Aerospace Technology, Changsha Institute of Technology, Changsha,
Hunan, P. R. China) "Characteristic and Non-Reflecting Exit Flow
Boundary Conditions," (08/93-03/94).
- Prof. Vadim I. Polezhaev,
(Institute for Problems in Mechanics, Russian Academy of Sciences,
Moscow, Russia): "Electrophoretic Separation and Crystal Growth in
Microgravity," (02/93-05/93)
- Prof. Helmut Sobieczky,
(Institut fuer Stroemungsmechanik, DLR-Goettingen, F. R. Germany):
"Transonic and Hypersonic Shape Inverse Design," (10/91; 10/93).
- Dr. Seungsoo Lee, Postdoctoral
Fellow (Defense Research Agency, Taejeon, Korea): "Magnetohydrodynamic
and Electrohydrodynamic Flow Modeling and Computations," (02/90-06/90).
- Dr. Lionel Marraffa, Group
Leader (ONERA, Chatillon, France and ESTEC, Noordwijk, The
Netherlands): "Hypersonic Radiating Flow Modeling and Computations,"
(08/85-03/87; 04/88-06/88; 10/89; 01/93; 01/96).
- Prof. Bing Ren, (Changsha
Institute of Technology, Changsha, P. R. China): "A Survey of Total
Variation Diminishing (TVD) Schemes," (05/87-11/87).
- Mr. Andrej Lipej, Senior
Researcher (Turboinstitut, Ljubljana, Yugoslavia): "Numerical Methods
for Hydraulic Turbomachinery Flow Computations," (09/87-11/87).
MEMBER
OF
Ph.
D.
DISSERTATION
COMMITTEE
Roy Knight (1984)
|
Shu-Cheng Simon Chen
(1984) |
Hsien-Jan Chang
(1984)
|
Kyuem R. Cho (1984)
|
Philippe Devloo
(1984)
|
S. V. Krishnamachari
(1985) |
Theofanis Strouboulis
(1985)
|
Bo-Nan Jiang (1985) |
Roy Bhat (1987)
|
K. H. G. Giridharan
(1987) |
K. Viswanathan (1988)
|
Robert McClay (1988) |
Greg Molvik (1989)
|
Michael M. Tom (1989) |
Robert Kunz (1991)
|
Anton Basson (1991) |
Yushen Zhang (1991)
|
Sixin Fan (1991) |
Yan Sheng Liu (1993)
|
Shuxin Zhang (1993) |
Jiang Luo (1994)
|
K. P. Sandeep (1994) |
Jaianthi Pallinti
(1994) (1995)
|
Philip E. O. Buelow |
Andrei Chernobrovkin
(1995)
|
Marty Chiaverini
(1997) |
Xinwen Xiao (1997)
|
Yongfu Liu (1998) |
Cuauhtemoc
Aviles-Ramos (2000)
|
Edi Sofyan (2001) |
George Nnanna (2001)
|
Frederic Felten
(2002) |
Dion Fleitas (2002)
|
Cora Martinez (2006) |
Bo Yu (2006)
|
Jiajia Ge (2006) |
Vili Panov (2006)
|
Dagnew Agerneh (2008) |
MEMBER
OF
M.
Sc.
THESIS
COMMITTEE
Juhji Nakata (1985)
|
M. Sharma (1985) |
Brett Siebert (1990)
|
Ripu Daman Singh
(1995) |
Michael Koiro (1997)
|
Jason Ferrara (1997) |
Eric Engebretsen
(1997)
|
Michael Huh (2002) |
| Sudhir Reddy
Posireddy (2008) |
|
PROFESSIONAL
SOCIETY
ADMINISTRATIVE
ACTIVITIES
- Member
- ASME Technical Committee on
Turbomachinery, Gas Turbine Division
- Member
- ASME Technical Committee on
Computational Heat Transfer (K-20)
- Member
- ASME Technical Committee on
Bioengineering Heat Transfer (K-17)
- Member
- AIAA Technical Committee on
Multidisciplinary Design Optimization
- January 1991-May 1993; May
2003-May 2006.
- Member
- AIAA Technical Committee on
Space Processing
- Member
- AIAA National Technical
Committee on Applied Aerodynamics
- Chairman
- AIAA Education Committee,
Southwest Texas Section
- Advisor
- AIAA Student Branch,
University of Texas at Austin
- Advisor
- AIAA Student Branch,
University of Texas at Arlington
- Founding Advisor
- AIAA Student Branch, Florida
International University
|
EDITED BOOK
VOLUMES
- Dulikravich,
G. S., Colaco, M. J., Orlande, H. R. B. and Tanaka, M. Inverse
Approaches to Drying of
Thin Bodies With Significant Shrinkage Effects (with G. H. Kanevce, L.
P. Kanevce, V. B. Mitrevski, H.R.B. Orlande), ASME Journal of Heat
Transfer, Vol. 129, March 2007, pp. 379-386.
(editors):
Inverse Problems, Design and Optimization (IPDO-2007) Vol. I, ISBN:
978-1-59916-279-9, Florida International University, Miami, FL, June
2007.
- Dulikravich, G.
S., Colaco, M. J.,
Orlande, H. R. B. and Tanaka, M. (editors): Inverse Problems, Design
and Optimization (IPDO-2007) Vol. II, ISBN: 978-1-59916-280-5, Florida
International University, Miami, FL, June 2007.
- Colaco, M. J., Orlande, H. R. B
and Dulikravich, G. S. (editors) Inverse Problems, Design and
Optimization – IPDO, Vol. I, ISBN: 85-7650-029-9, E-papers Publishing
House, Ltd., Rio de Janeiro, Brazil, March, 2005.
- Colaco, M. J., Orlande, H. R. B
and Dulikravich, G. S. (editors) Inverse Problems, Design and
Optimization – IPDO, Vol. II, ISBN: 85-7650-030-2, E-papers Publishing
House, Ltd., Rio de Janeiro, Brazil, March, 2005.
- Tanaka, M. and Dulikravich, G. S.
(editors) Inverse Problems in Engineering Mechanics III, a book of
selected proceedings of International Symposium on Inverse Problems in
Engineering Mechanics 2001 (ISIP’01), Nagano, Japan, Elsevier Science,
Ltd., U.K., 2001 ISBN 0 08 043951 9).
- Tanaka, M. and Dulikravich, G. S.
(editors) Inverse Problems in Engineering Mechanics II, a book of
selected proceedings of International Symposium on Inverse Problems in
Engineering Mechanics 2000 (ISIP’2K), Nagano, Japan, Elsevier Science,
Ltd., U.K., 2000 (ISBN 0 08 043693 5).
- Fujii, K. and Dulikravich, G. S.
(editors): Recent Development of Aerodynamic Design Methodologies
- Inverse Design and Optimization, Vieweg Series on Notes on Numerical
Fluid Mechanics, Vol. 68, Springer, April 1999.
- Dulikravich, G. S., Woodbury, K.
A., Blackwell, B. and Amon, C., (editors): Proceedings of
Symposium on Multidisciplinary Inverse Problems and Optimization in
Heat Transfer, ASME International Mechanical Engineering Congress and
Exposition, Anaheim, CA, Nov. 16-20, 1998, ASME HTD-Vol. 361-5.
- Tanaka, M. and Dulikravich, G. S.
(editors) Inverse Problems in Engineering Mechanics I, a book of
selected proceedings of International Symposium on Inverse Problems in
Engineering Mechanics 1998 (ISIP’98), Nagano, Japan, Elsevier Science,
Ltd., U.K., 1998 (ISBN 0-08-043319-7).
- Dulikravich, G. S. and Woodbury,
K. A. (editors): Proceedings of Symposium on Inverse Design
Problems in Heat Transfer and Fluid Flow, ASME National Heat Transfer
Conference, Baltimore, MD, August 10-12, 1997, ASME HTD-Vol. 340,
Volume 2.
- Siginer, D. A. and Dulikravich,
G. S. (editors): Proceedings of Symposium on Developments in
Electrorheological Flows-1995, ASME WAM'95, San Francisco, CA, November
12-17, 1995, ASME FED-Vol. 235, MD-Vol. 71.
- Dulikravich, G. S.
(editor): Proceedings of the Third International Conference on
Inverse Design Concepts and Optimization in Engineering Sciences
(ICIDES-III), Washington, D.C., October 23-25, 1991; also NASA
CR-188125, January 1992.
- Dulikravich, G. S. (Invited
Editor): Interdisciplinary Inverse Design and Optimization, a
special issue of the Applied Mechanics Reviews, June 1988.
- Dulikravich, G. S.
(editor): Proceedings of the Second International Conference on
Inverse Design Concepts and Optimization in Engineering Sciences
(ICIDES-II), The Pennsylvania State University, University Park, PA,
October 26-28, 1987.
- Dulikravich, G. S.,
(editor): Proceedings of the First International Conference on
Inverse Design Concepts in Engineering Sciences (ICIDES-I), University
of Texas at Austin, College of Engineering, October 17-18, 1984.
BOOK
CHAPTERS
- Dulikravich, G. S.,
Orlande, H.
R. B. and Dennis, B. H., “Inverse Engineering,” in Computational
Mechanics: Solids, Structures and Coupled Problems (eds: Mota Soares,
C.A., Martin, J.A.C., Rodrigues, H.C. and Ambrosio, J.A.C.), Springer,
Lisbon, Portugal, June 5-8, 2006, pp. 269-288.
- Dennis, B. H. and
Dulikravich, G.
S., “Control of Flow Separation Over a Circular Cylinder Using
Electro-Magnetic Fields: Numerical Simulation,” Chapter 12 in Computing
the Future IV: Frontiers of Computational Fluid Dynamics – 2006, (eds:
Caughey, D. A. and Hafez, M. M.), World Scientific, Singapore, 2005,
pp. 265-284.
- Colaço, J. M.,
Dulikravich, G. S., Orlande, H. R. B. and Martin, T. J., “Hybrid
Optimization With Automatic Switching Among Optimization Algorithms”, a
chapter in Evolutionary Algorithms and Intelligent Tools in Engineering
Optimization (eds: W. Annicchiarico, J. Périaux, M. Cerrolaza
and G. Winter), CIMNE, Barcelona, Spain/WITpress, UK, (ISBN
1-84564-038-1), 2005, pp. 92-118.
- Dulikravich, G. S.,
Martin, T.
J., Dennis, B. H. and Egorov, I. N., “Aero-Thermal-Elasticity-Materials
Optimization of Cooled Gas Turbine Blades: Part I,” in Lecture Series
on Numerical Optimization Methods & Tools for
Multi-Criteria/Multi-Disciplinary Design with Applications to
Aeronautics and Turbomachinery, Von Karman Institute for Fluid
Dynamics, Belgium, November 15 – 19, 2004.
- Dulikravich, G. S.,
Martin, T.
J., Dennis, B. H. and Egorov, I. N., “Aero-Thermal-Elasticity-Materials
Optimization of Cooled Gas Turbine Blades: Part II,” in Lecture Series
on Numerical Optimization Methods & Tools for
Multi-Criteria/Multi-Disciplinary Design with Applications to
Aeronautics and Turbomachinery, Von Karman Institute for Fluid
Dynamics, Belgium, November 15 – 19, 2004.
- Martin, T. J. and
Dulikravich, G.
S., “Boundary Element Techniques for Inverse Problems”, Chapter 6
in Inverse Engineering Handbook (ed.: Woodbury, K. A.), CRC Press, Boca
Raton, FL, 2002, pp. 361-394.
- Martin, T. J. and
Dulikravich, G.
S., “Aero-Thermo-Elastic Concurrent Design Optimization of
Internally Cooled Turbine Blades”, Chapter 5 in Coupled Field Problems,
Series on Advances in Boundary Elements (eds: Kassab, A. J. and
Aliabadi, M. H.), WIT Press, Boston, MA, 2001, pp. 137-184.
- Dulikravich, G. S.:
“Electro-Magneto-Hydrodynamics and Solidification,” Chapter no. 9 in
Advances in Flow and Rheology of Non-Newtonian Fluids, Part B (eds: D.
A. Siginer, D. De Kee and R. P. Chhabra), Rheology Series, 8, Elsevier
Publishers, June 1999, pp. 677-716.
- Dulikravich, G. S.,
Martin, T.
J., Dennis, B. H. and Foster, N. F.: “Multidisciplinary Hybrid
Constrained GA Optimization”, Invited lecture, Chapter 12 in EUROGEN’99
- Evolutionary Algorithms in Engineering and Computer Science: Recent
Advances and Industrial Applications, (eds: K. Miettinen, M. M. Makela,
P. Neittaanmaki and J. Periaux), John Wiley & Sons, Jyvaskyla,
Finland, May 30-June 3, 1999, pp. 231-260.
- Dulikravich, G. S. and
Baker, D.
P.: “Using Existing Flow-Field Analysis Codes for Inverse Design
of Three-dimensional Aerodynamic Shapes,” a chapter in Recent
Development of Aerodynamic Design Methodologies - Inverse Design and
Optimization, (eds: Fujii, K. and Dulikravich, G. S.), Vieweg Series on
Notes on Numerical Fluid Mechanics, Vol. 68, Springer, April 1999, pp.
89-112.
- Dulikravich, G. S.:
“Design and Optimization Tools Development”, Chapters no. 10-15 in New
Design Concepts for High Speed Air Transport, (ed: H. Sobieczky),
Springer, Wien/New York, 1997, pp. 159-236.
- Dulikravich, G. S. and
Martin,
T. J.: "Inverse Shape and Boundary Condition Problems and
Optimization in Heat Conduction", Chapter no. 10 in Advances in
Numerical Heat Transfer - Volume I (eds: Minkowycz, W. J. and Sparrow,
E. M.), Taylor & Francis, November 1996, pp. 381-426.
PAPERS
IN REFEREED JOURNALS
-
Magneto-Hydrodynamic
Simulations
Using
Radial
Basis
Functions (with Colaco, M. J. and
Orlande, H. R. B.), International Journal of Heat and Mass Transfer,
Vol. 52, 2009, pp. 5932-5939, DOI:
10.1016/j.ijheatmasstransfer.2009.08.009.
- Interfacial Heat
Transfer
Coefficients and Solidification of an Aluminum Alloy in a Rotary
Continuous Caster (with N. Cheung, N.S. Santos, J.M.V. Quaresma, A.
Garcia), International Journal of Heat and Mass Transfer, Vol. 52,
2009, pp. 451-459.
- Approximation of
the Likelihood
Function in the Bayesian Technique for the Solution of Inverse Problems
(with Orlande, H.R.B. and Colaco, M.J.), Inverse Problems in Science
and Engineering, Vol. 16, issue 6, 2008, pp. 677-692
- A Response Surface
Method-Based
Hybrid Optimizer (with Colaco, M. J. and Sahoo, D.), Inverse Problems
in Science and Engineering, Vol. 16, issue 6, 2008, pp. 717-741.
- Optimizing
Chemistry of Bulk
Metallic Glasses for Improved Thermal Stability (with Egorov, I. N. and
Colaco, M. J.), Modelling and Simulation in Materials Science and
Engineering, 16, 2008, 075010 (19pp).
- Multi-Objective
Hybrid
Evolutionary Optimization Utilizing Automatic Algorithm Switching (with
Moral, R. J.), AIAA Journal, Vol. 46, No. 3, March 2008, pp 673-700.
- Identification and
Design of a
Source Term in a Two-Region Heat Conduction Problem (with Silva, P. P.,
Orlande, H. R. B., Colaco, M. J., Shiakolas, P. S.), Inverse Problems
in Science and Engineering, Vol. 15, No. 7, 2007, pp. 661-677.
- Multi-Objective
Design
Optimization of Topology and Performance of Branching Networks of
Cooling Passages (with Gonzalez, M. J., Jelisavcic, N., Moral, R. J.,
Sahoo, D. and Martin, T. J. M.), International Journal of Thermal
Sciences, Vol. 46, 2007, pp. 1191-1202.
- Solidification of
Double-Diffusive Flows Using Thermo-Magneto-Hydrodynamics and
Optimization (with Colaco, M.J.), Materials and Manufacturing
Processes, Vol. 22, 2007, pp. 594-606.
- Inverse Approaches
to Drying of
Thin Bodies With Significant Shrinkage Effects (with G. H. Kanevce, L.
P. Kanevce, V. B. Mitrevski, H.R.B. Orlande), ASME Journal of Heat
Transfer, Vol. 129, March 2007, pp. 379-386.
- A Multilevel Hybrid
Optimization
of Magnetohydrodynamic Problems in Double-Diffusive Fluid Flow (with
Colaco, M. J.), Journal of Physics and Chemistry of Solids, Vol. 67,
2006, pp. 1965-1972.
- Convective Heat Transfer
Control
Using Magnetic and Electric Fields (with Colaco, M. J.), Journal of
Enhanced Heat Transfer, Vol. 13, No. 2, 2006, pp. 139-155.
- Inverse Problems of
Aircraft
Structural Parameter Estimation: Application of Neural Networks (with
Trivailo, P., Sgarioto, D. and Gilbert, T.), Inverse Problems in
Science and Engineering, Vol. 14, No. 4, 2006, pp. 351-364.
- Inverse and Optimization
Problems in Heat Transfer (with Colaco, M. J. and Orlande, H.R.B),
Journal of the Brazilian Society of Mechanical Science &
Engineering, Vol. XXVIII, No. 1, January-March 2006, pp. 1-23.
- Application of Inverse
Concepts
to Drying (with Kanevce, Lj. and Kanevce, G. H.), Thermal Science, Vol.
2, 2005, pp. 31-44.
- Estimation of
Thermophysical
Properties of Moist Materials Under Different Drying Conditions (with
Kanevce, G. H., Kanevce, Lj. P. and Orlande, H. R. B.), Inverse
Problems in Science and Engineering, Vol. 13, No. 4, August 2005, pp.
341-354.
- Chemical Composition
Design of
Superalloys for Maximum Stress, Temperature and Time-to-Rupture Using
Self-Adapting Response Surface Optimization (with Egorov-Yegorov, I.
N.), Materials and Manufacturing Processes, Vol. 20, No. 3, May 2005,
pp. 569-590.
- Control of Unsteady
Solidification via Optimized Magnetic Fields (with Colaco, M. J. and
Martin, T. J.), Materials and Manufacturing Processes, Vol. 20, No. 3,
May 2005, pp. 435-458.
- Aerodynamic Data
Modeling Using
Support Vector Machines (with Fan, H.-Y. and Han, Z.-X.), Inverse
Problems in Science and Engineering, Vol. 13, No. 3, 2005, pp. 261-278.
- Determination of
Temperatures
and Heat Fluxes on Surfaces and Interfaces of Multi-domain
Three-Dimensional Electronic Components (with Dennis, B. H. and Han,
Z.-X.), ASME Journal of Electronic Packaging, Vol. 126, No. 4, December
2004, pp. 457-464.
- Optimization of Wall
Electrodes
for Electro-Hydrodynamic Control of Natural Convection Effects During
Solidification (with Colaco, M. and Martin, T. J.), Materials and
Manufacturing Processes, Vol. 19, No. 4, 2004, pp. 719-736.
- Optimization of
Intensities, and
Orientations of Magnets Controlling Melt Flow During Solidification
(with Colaco, J. M., Dennis, B. H., Martin, T. J., Egorov-Yegorov, I.
N. and Lee, S.), Materials and Manufacturing Processes, Vol. 19, No. 4,
2004, pp. 695-718.
- Simultaneous Estimation
of
Spatially-Dependent Diffusion Coefficient and Source Term in Nonlinear
1D Diffusion Problems (with Rodrigues, F. A. and Orlande, H. R. B.),
Mathematics and Computers in Simulation, Vol. 66, issues 4-5, 2004, pp.
409-424.
- Parallel
Thermoelasticity
Optimization of 3-D Serpentine Cooling Passages in Turbine Blades (with
Dennis, B. H., Egorov, I. N., Sobieczky, H. and Yoshimura, S.),
International Journal of Turbo & Jet-Engines, Vol. 21, No. 1, 2004,
pp. 57-68.
- An Implicit and Explicit
BEM
Sensitivity Approach for Thermo-Structural Optimization (with Martin,
T. J.), Engineering Analysis with Boundary Elements, Vol. 28, No. 3,
2004, pp. 257-266.
- A Finite Element
Formulation for
the Determination of Unknown Boundary Conditions for 3-D Steady
Thermoelastic Problems (with Dennis, B. H. and Yoshimura, S.), ASME
Journal of Heat Transfer, Vol. 126, February 2004, pp. 110-118.
- Finite Element
Simulation of
Cooling of 3-D Human Head and Neck (with Dennis, B. H., Eberhart, R. C.
and Radons, S. W.), ASME Journal of Biomechanical Engineering, Vol.
125, December 2003, pp. 832-840.
- Rotor Cascade Shape
Optimization
With Unsteady Passing Wakes Using Implicit Dual Time Stepping and
Genetic Algorithm (with Lee, E.-S. and Dennis, B. H.), International
Journal of Rotating Machinery, Vol. 9, 2003, pp. 1-9.
- An Inverse Method
Allowing
User-Specified Layout of Magnetized Micro-Fibers in Solidifying
Composites (with Colaco, M., Martin, T. J. and Lee, S.), Journal of
Composite Materials, Vol. 37, No. 15, 2003, pp. 1351-1366.
- Analysis and
Multi-disciplinary
Optimization of Internal Coolant Networks in Turbine Blades (with
Martin, T. J.), AIAA Journal of Propulsion and Power, Vol. 18, No. 4,
2002, pp. 896-906.
- Magnetic Field
Suppression of
Melt Flow in Crystal Growth (with Dennis, B. H.), International Journal
of Heat & Fluid Flow, Vol. 23, no. 3, 2002, pp. 269-277.
- Numerical Simulation of
Laser
Induced Plasma During Pulsed Laser Deposition (with Zhang, Z.-Y. and
Han, Z.-X.), Journal of Applied Physics, Vol. 90, No. 12, December
2001, pp. 5889-5897.
- Multi-Objective
Optimization of
Turbomachinery Cascades for Minimum Loss, Maximum Loading, and Maximum
Gap-to-Chord Ratio (with Dennis, B. H., Egorov, I. N., Han, Z.-X., and
Poloni, C.), International Journal of Turbo & Jet-Engines, Vol. 18,
No. 3, 2001, pp. 201-210.
- Optimization of
Multistage
Turbines Using a Through-flow Code (with Petrovic, M. V. and Martin, T.
J.), Journal of Power and Energy, Vol. 215, Part A, 2001, pp. 559-569.
- Optimization of
Turbomachinery
Airfoils with a Genetic/Sequential-Quadratic-Programming Algorithm
(with Dennis, B. H. and Han, Z.-X.), AIAA Journal of Propulsion and
Power, Vol. 17, No. 5, 2001, pp. 1123-1128.
- Optimization of
Magneto-Hydrodynamic Control of Diffuser Flows Using Micro-Genetic
Algorithm and Least Squares Finite Elements (with Dennis, B. H.),
Journal of Finite Elements in Analysis and Design, Vol. 37, No. 5,
2001, pp. 349-363.
- Simultaneous Prediction
of
External Flow-Field and Temperature in Internally Cooled 3-D Turbine
Blade Material (with Han, Z.-X. and Dennis, B. H.), International
Journal of Turbo & Jet-Engines, Vol. 18, No. 1, 2001, pp. 47-58.
- Non-Reflective Boundary
Conditions for a Consistent Model of Axisymmetric
Electro-Magneto-Hydrodynamic Flows (with Ko, H.-J.), International
Journal of Nonlinear Sciences and Numerical Simulation, Vol. 1, No. 4,
Dec. 2000, pp. 247-256.
- Maximizing Multistage
Turbine
Efficiency by Optimizing Hub and Shroud Shapes and Inlet and Exit
Conditions of Each Blade Row (with Petrovic, M. V. and Martin, T. J.),
International Journal of Turbo & Jet-Engines, Vol. 17, 2000, pp.
267-278.
- Inverse Determination of
Temperature-Dependent Thermal Conductivity Using Steady Surface Data on
Arbitrary Objects (with Martin, T. J.), ASME Journal of Heat Transfer,
Vol. 122, August 2000, pp. 450-459.
- Non-Reflective Boundary
Conditions for a Consistent Two-dimensional Model of Planar
Electro-Magneto-Hydrodynamics (EMHD) (with Ko, H.-J.), International
Journal of Non-Linear Mechanics, Vol. 36, No. 1, August 2000, pp.
155-163.
- A Fully Non-Linear
Theory of
Electro-Magneto-Hydrodynamics (with Ko, H.-J.), International Journal
of Non-Linear Mechanics, Vol. 35, No. 4, February 2000, pp. 709-719.
- Simultaneous
Determination of
Temperatures, Heat Fluxes, Deformations, and Tractions on Inaccessible
Boundaries (with Dennis, B. H.), ASME Journal of Heat Transfer, Vol.
121, Aug. 1999, pp. 537-545.
- Inverse Determination of
Steady
Heat Convection Coefficient Distributions (with Martin, T. J.), ASME
Journal of Heat Transfer, May 1998, Vol. 120, pp. 328-334.
- Unified
Electro-Magneto-Fluid
Dynamics (EMFD): A Survey of Mathematical Models (with Lynn, S. R.),
International Journal of Non-Linear Mechanics, Vol. 32, No. 5,
September 1997, pp. 923-932.
- Unified
Electro-Magneto-Fluid
Dynamics (EMFD): Introductory Concepts (with Lynn, S. R.),
International Journal of Non-Linear Mechanics, Vol. 32, No. 5,
September 1997, pp. 913-922.
- Three-Dimensional
Aerodynamic
Shape Optimization Using Genetic and Gradient Search Algorithms (with
Foster, N. F.), AIAA Journal of Spacecraft and Rockets, Vol. 34, No. 1,
Jan.-Feb. 1997, pp. 36-42.
- Inverse Determination of
Boundary Conditions and Sources in Steady Heat Conduction with Heat
Generation (with Martin, T. J.), ASME Journal of Heat Transfer, Vol.
118, No. 3, August 1996, pp. 546-554.
- Acceleration of
Iterative
Algorithms on Highly Clustered Grids (with Choi, K.-Y.), AIAA Journal,
Vol. 34, No. 4, April 1996, pp. 691-699.
- Finding Unknown Surface
Temperatures and Heat Fluxes in Steady Heat Conduction (with Martin, T.
J.), IEEE Transactions on Components, Packaging and Manufacturing
Technology (CPMT) - Part A, Vol. 18, No. 3, September 1995, pp. 540-545.
- An Inverse Method for
Finding
Unknown Surface Tractions and Deformations in Elastostatics (with
Martin, T. J. and Halderman, J. D.), Computers and Structures, Vol. 56,
No. 5, Sept. 1995, pp. 825-836.
- Geometrical Inverse
Problems in
Three-dimensional Non-Linear Steady Heat Conduction (with Martin, T.
J.), Engineering Analysis with Boundary Elements, Vol. 15, 1995, pp.
161-169.
- Sensitivity-Based
Methods for
Convergence Acceleration of Iterative Algorithms (with Choi, K.-Y.),
Computer Methods in Applied Mechanics and Engineering, Vol 123, Nos.
1-4, June 1995, pp. 161-172.
- Modeling
Three-dimensional
Solidification With Magnetic Fields and Reduced Gravity (with Ahuja, V.
and Lee, S.), International Journal of Heat and Mass Transfer, Vol. 37,
No. 5, 1994, pp. 837-853.
- Modeling of Dielectric
Fluid
Solidification With Charged Particles in Electric Fields and Reduced
Gravity (with Ahuja, V. and Lee, S.), Numerical Heat Transfer:
Fundamentals, Part B, Vol. 25, No. 3, 1994, pp. 357-373.
- Inverse Design of
Super-Elliptic
Cooling Passages in Coated Turbine Blade Airfoils (with Martin, T. J.),
AIAA Journal of Thermophysics and Heat Transfer, Vol. 8, No. 2,
April-June, 1994, pp. 288-294.
- Simulation of
Electrohydrodynamic Enhancement of Laminar Flow Heat Transfer (with
Ahuja, V. and Lee, S.), Journal of Enhanced Heat Transfer, Vol. 1, No.
1, August 1993, pp. 115-126.
- Magnetized Fiber
Orientation
Control in Solidifying Composites: Numerical Simulation (with Kosovic,
B. and Lee, S.), ASME Journal of Heat Transfer, Vol. 115, Feb. 1993,
pp. 255-262.
- Aerodynamic Shape Design
and
Optimization: Status and Trends, AIAA Journal of Aircraft, Vol. 29, No.
5, Nov./Dec. 1992, pp. 1020-1026.
- Minimization of the
Number of
Cooling Holes in Internally Cooled Turbine Blades (with Kosovic, B.),
International Journal of Turbo and Jet Engines, Vol. 9, No. 4, 1992,
pp. 277-283.
- Magnetohydrodynamic
Steady Flow
Computations in Three Dimensions (with Lee, S.), International Journal
for Numerical Methods in Fluids, Vol. 13, No. 7, Oct. 1991, pp. 917-936.
- Accelerated Computation
of
Viscous Incompressible Flows with Heat Transfer (with Lee, S.),
Numerical Heat Transfer: Fundamentals, Part B, Vol. 19, June
1991, pp. 223-241.
- Distributed Minimal
Residual
(DMR) Method for Acceleration of Iterative Algorithms (with Lee, S.),
Computer Methods in Applied Mechanics and Engineering, Vol. 86, 1991,
pp. 245-262.
- Physically Consistent
Models for
Artificial Dissipation in Transonic Potential Flow Computations (with
Mortara, K. W. and Marraffa, L.), Computer Methods in Applied Mechanics
and Engineering, Vol. 79, May 1990, pp. 309-320.
- Acceleration of
Iterative
Algorithms for Euler Equations of Gasdynamics (with Lee, S.), AIAA
Journal, Vol. 28, No. 5, May 1990, pp. 939-942.
- Numerical Simulation of
Unsteady
Flows Generated by Dissociating Nitrogen Diffusion (with Marraffa, L.
and Deiwert, G. S.), AIAA Journal of Thermophysics and Heat Transfer,
Vol. 3, No. 3, July 1989, pp. 254-259.
- Analysis of Artificial
Dissipation Models for Transonic Full Potential Equation, AIAA Journal,
Vol. 26, No. 10, October 1988, pp. 1238-1245.
- Theory of Compressible
Irrotational Flows Including Heat Conductivity and Longitudinal
Viscosity (with Kennon, S. R.), International Journal of Mathematical
and Computer Modelling, Vol. 10, No. 8, 1988, pp. 583-592.
- Inverse Design and
Active
Control Concepts in Strong Unsteady Heat Conduction, Applied Mechanics
Reviews, Vol. 41, No. 6, June 1988, pp. 270-277.
- Supercritical Cascade
Flow
Analysis with Shock-Boundary Layer Interaction and Shock-Free Redesign
(with Niederdrenk, P. and Sobieczky, H.), ASME Journal of
Turbomachinery, Vol. 109, July 1987, pp. 413-419.
- Fast Iterative
Algorithms Based
on Optimal Explicit Time-Stepping (with Huang, C.-Y.), Computer Methods
in Applied Mechanics and Engineering, Vol. 63, August 1987, pp. 15-36.
- Viscous-Inviscid
Computations of
Transonic Separated Flows Over Solid and Porous Cascades (with Olling,
C. R.), ASME Journal of Turbomachinery, Vol. 109, April 1987, pp.
220-228.
- A Hodograph-Based Method
for the
Design of Shock-Free Cascades (with Hassan, A.), International Journal
for Numerical Methods in Fluids, Vol. 7, No. 3, March 1987, pp. 197-213.
- Porous Airfoil Analysis
Using
Viscous-Inviscid Coupling at Transonic Speeds (with Olling, C. R.),
International Journal for Numerical Methods in Fluids, Vol. 7, No. 2,
Feb. 1987, pp. 103-129.
- Stream Function and
Stream-Function-Coordinate (SFC) Formulation for Inviscid Flow Field
Calculations (with Huang, C.-Y.), Computer Methods in Applied Mechanics
and Engineering, Vol. 59, Nov. 1986, pp. 155-177.
- Grid Orthogonalization
for
Curvilinear Alternating-Direction Techniques (with Hayes, L. J. and
Kennon, S. R.), Computer Methods in Applied Mechanics and Engineering,
Vol. 59, November 1986, pp. 141-154.
- Inverse Design of
Composite
Turbine Blade Circular Coolant Flow Passages (with Chiang, T.-L.), ASME
Journal of Turbomachinery, Vol. 108, Oct. 1986, pp. 275-282.
- Generalized Non-Linear
Minimal
Residual (GNLMR) Method for Iterative Algorithms (with Huang, C.-Y. and
Kennon, S. R.), Journal of Computational and Applied Mathematics, Vol.
16, November 1986, pp. 215-232.
- Generation of
Solution-Adaptive
Computational Grids Using Optimization (with Carcaillet, R. and Kennon,
S. R.), Computer Methods in Applied Mechanics and Engineering, Vol. 57,
Sept. 1986, pp. 279-295.
- Generation of
Computational
Grids Using Optimization (with Kennon, S. R.), AIAA Journal, Vol. 24,
No. 7, July 1986, pp. 1069-1073.
- Optimization of
Three-dimensional Computational Grids (with Carcaillet, R. and Kennon,
S. R.), AIAA Journal of Aircraft, Vol. 23, No. 5, May 1986, pp. 415-421.
- Inverse Design of
Coolant Flow
Passage Shapes with Partially Fixed Internal Geometries (with Kennon,
S. R.), International Journal of Turbo and Jet Engines, Vol. 3, No. 1,
1986, pp. 13-20.
- Inverse Design of
Multiholed
Internally Cooled Turbine Blades (with Kennon, S. R.), International
Journal for Numerical Methods in Engineering, Vol. 22, No. 2, February
1986, pp. 363-375.
- The Inverse Design of
Internally
Cooled Turbine Blades (with Kennon, S. R.), ASME Journal of Engineering
for Gas Turbines and Power, Vol. 107, January 1985, pp. 123-126.
- Optimum Acceleration
Factors for
Iterative Solution of Linear and Non-Linear Differential Systems (with
Kennon, S. R.), Computer Methods in Applied Mechanics and Engineering,
Vol. 47, 1984, pp. 357-367.
- Shockless Design and
Analysis of
Transonic Cascade Shapes (with Sobieczky, H.), AIAA Journal, Vol. 20,
No. 11, Nov. 1982, pp. 1572-1578.
JOURNAL
ARTICLES AND CHAPTERS IN PRESS
- Improvements to Single-Objective
Constrained Predator-Prey Evolutionary Optimization Algorithm (with
Chowdhury, S.), Structural and Multidisciplinary
Optimization, DOI: 10.1007/s00158-009-0433-x.
- Simulation of Channel Flows Using
Thermal Lattice Boltzmann Method (with Gokaltun, S.), Computers and
Mathematics with Applications, DOI: 10.1016/j.camwa.2009.08.045.
- Three-Dimensional
Parametric
Shape
Optimization
using
Parallel
Computers
(with
Dennis,
B.
H.,
Egorov-Yegorov,
I.
N.,
Yoshimura,
S.),
Computational
Fluid
Dynamics
Journal,
Vol.17, no.4, 2009.
- Modified Predator-Prey
Algorithm for Constrained and Unconstrained Multi-objective
Optimization (with Chowdhury, S. and Moral. R. J.), International
Journal of Mathematical Modelling and Numerical Optimisation.
- Inverse Determination of Eroded
Smelter Wall Thickness Variation Using an Elastic Membrane Concept
(with Baker, D. P., Dennis, B. H. and Martin, T. J.), ASME Journal of
Heat Transfer.
- Robustness, Accuracy and
Efficiency of Different Response Surface Methods (with Colaco, M J., da
Silva, W. B., and Magalhaes, A. C.), International Journal of
Mathematical Modelling and Numerical Optimisation.
PUBLICATIONS
SUBMITTED FOR REVIEW
- Evolutionary Wavelet Neural Network
for Multidimensional Function Estimation in Optimization (with Sahoo,
D.), Optimization Methods and Software.
- Bayesian Estimation of the Thermal
Conductivity Components of Orthotropic Solids (with Orlande, H. R. B.
and Colaco, M. J.), High Temperatures - High Pressures; International Journal of Thermophysical Properties
Research.
- Dennis, B. H. and Colaco, M. J., “Electro-Magneto-Fluid-Dynamics
(EMFD):
Theory
and
Simulations”, a book contract with Wiley.
PAPERS
IN CONFERENCE PROCEEDINGS (REFEREED )
- Bayesian
Approach
for
the
Estimation
of
Temperature
Field
in
a
Multilayered
Composite
Pipeline
System
(with
Vianna,
F.
and Orlande, H.R.B.), 14th
International Heat Transfer Conference - IHTC, Washington, D.C., August 7-13, 2010
- Inverse
Design of Topology of Branching Passages for Viscous Flows Having Equal
Mass Flow Rate in Each Branch (with Wood, S.), 14th International Heat
Transfer Conference - IHTC, Washington, D.C., August 7-13, 2010.
- Designing Molecules Using
Hybrid Evolutionary Optimization (with Bhargava, S.), Fourth European Conference on Computational Mechanics
(Solids, Structures and Coupled Problems in Engineering) ECCM 2010, Paris, France, May 16-21, 2010
- Multi-Objective Optimization of
Topology and Performance of
Three-dimensional Networks of Cooling Passages (with Ardila, R. and
Moral, R. J.), Keynote Lecture, Energy and Thermal Sciences Symposium
at COBEM, 20th International Congress of Mechanical Engineering,
Gramado, Brazil, November 15-20, 2009.
- Non-Intrusive Methods to Predict
the Temperature Field in a Pipeline System by Bayesian Filters (with
Vianna, F. and Orlande, H. R. B.),COBEM, 20thInternational Congress of
Mechanical Engineering,
- Inverse Design of Topology of
Branching Passages for Viscous Flows (with Wood, S.), paper
IMECE2009-10740, 2009 ASME IMECE Congress, Orlando, FL, November 15-19,
2009.
- Non-Intrusive
Methods to Predict
the Temperature Field in a Pipeline System by Bayesian Filters (with
Vianna, F. and Orlande, H. R. B.), COBEM, 20th International Congress
of Mechanical Engineering, Gramado, Brazil, November 15-20, 2009.
- Optimizing Concentrations of
Alloying Elements and Tempering for Corrosion Resistant Aluminum Alloys
(with Bhargava, S., Colaco, M. J., Murty, S. and Agarwal, A.),
Materials Science & Technology 2009 Conference, MS&T’09,
Pittsburgh, PA, October 25-29, 2009.
- Modified
Predator-Prey (MPP)
Algorithm for Constrained Multi-objective Optimization (with Chowdhury,
S. and Moral, R. J.), EUROGEN 2009, Cracow, Poland, June 15-17, 2009.
- Obtaining High Quality Numerical
Results on Coarse Grids via an Optimized Artificial Dissipation Concept
(with Chowdhury, S.), 2nd International Congress of Serbian Society of
Mechanics, Palic (Subotica), Serbia, June 1-5, 2009.
- Estimation of
the Temperature
Field in Pipelines by Using Kalman Filter (with Vianna, F., Orlande, H.
R. B.), 2nd International Congress of Serbian Society of Mechanics,
Palic (Subotica), Serbia, June 1-5, 2009.
- Radial Basis
Functions Applied to
the Solution of the Natural Convection Problem in Square Cavities (with
Magalhaes, A. C., Colaco, M. J and Orlande, H. R. B.), 12th Brazilian
Congress of Thermal Engineering and Sciences, Belo Horizonte, MG,
Brazil, November 10-14, 2008.
- Development of
Digital Filters
for Inverse Heat Conduction Problems (with de Sousa, P., Fernandes, A.
P., Guimaraes, G.), 12th Brazilian Congress of Thermal Engineering and
Sciences, Belo Horizonte, MG, Brazil, November 10-14, 2008.
- A Hybrid
Self-Organizing Response
Surface Methodology (with Moral, R. J.), paper AIAA-2008-5891, 12th
AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference,
Victoria, British Columbia, Canada, September 10-12, 2008.
- RBF-Based
Methods for Highly
Multidimensional Response Surfaces Using Scarce Data Sets (with Colaco,
M. J.), paper AIAA-2008-5892, 12th AIAA/ISSMO Multidisciplinary
Analysis and Optimization Conference, Victoria, British Columbia,
Canada, September 10-12, 2008.
- Bayesian
Estimation of the
Thermal Conductivity Components of Orthotropic Solids (with Orlande, H.
R. B. and Colaco, M. J.), 5th Brazilian National Congress of Mechanical
Engineering - CONEM, Salvador, Bahia, Brazil, August 18-21, 2008.
- Identification
of
Parameters in
a System of Differential Equations Modeling Evolution of Infectious
Diseases (with Hernandez, A., Colaco, M. J. and Moral, R. J.), ASME
paper DETC2008-49595, Symposium at the 2008 ASME International Design
Engineering Technical Conferences (IDETC) and Computers and Information
in Engineering Conference (CIE), (eds. Dulikravich, G.S., Michopoulos,
J. and Kumar, A. V.), Brooklyn, NY, August 3-6, 2008.
- Dynamic
Observer Method Based on
Modified Green’s Functions for Robust and More Stable Inverse
Algorithms (with Sousa, P.F.B., Fernandes. A.P., Borges, V.L. and
Guimaraes, G.), ASME paper DETC2008-49062, Symposium at the 2008 ASME
International Design Engineering Technical Conferences (IDETC) and
Computers and Information in Engineering Conference (CIE), (eds.
Dulikravich, G.S., Michopoulos, J. and Kumar, A. V.), Brooklyn, NY,
August 3-6, 2008.
- Predator-Prey
Evolutionary
Multi-Objective Optimization Algorithm: Performance and Improvements
(with Chowdhury, S. and Moral, R. J.), 7th conference of Association
for Structural and Multidisciplinary Optimization in the UK (ed:
Toropov, V. V.), Bath, U.K., July 7-8, 2008.
- A Comparison
of Accuracy and
Robustness of Methods for Construction of Multi-dimensional Response
Surfaces (with Colaco, M. J.), Minisymposium on “Metamodels for High
Dimensionality Response Surfaces in Multiobjective Optimization”, 8th
World Congress of Computational Mechanics, (eds: Dulikravich, G. S. and
Colaco, M. J.), Venice, Italy, June 30-July 5, 2008.
- Magneto-Hydrodynamic
Simulations
Using
Radial
Basis
Functions
(with
Colaco,
M.
J.),
Minisymposium
on
“Computational
Electro-Magneto-Fluid-Dynamics”,
8th
World
Congress
of
Computational
Mechanics,
(eds: Gerbeth, G., Dulikravich, G. S. and
Pericleous, K.), Venice, Italy, June 30-July 5, 2008.
- Simulation of
Channel Flows
Using Thermal Lattice Boltzmann Method (with Gokaltun, S.), ICMES-5th
Mesoscopic Methods in Engineering and Science Conference, Amsterdam,
The Netherlands, June 16-20, 2008.
- Application
of Bayesian Filters
to Heat Conduction Problems (with Orlande, H. R. B. and Colaco, M. J.),
EngOpt 2008 - International Conference on Engineering Optimization,
(ed: Herskovits, J.), Rio de Janeiro, Brazil, June 1-5, 2008.
- A Response
Surface Method Based
Hybrid Optimizer (with Colaco, J. M.), EngOpt 2008 - International
Conference on Engineering Optimization, (ed: Herskovits, J.), Rio de
Janeiro, Brazil, June 1-5, 2008.
- Inverse
Estimation of Moisture
Diffusivity by Utilizing Temperature Response of a Drying Body (with G.
Kanevce, L. Kanevce, V. Mitrevski), ICCES'08: International Conference
on Computational & Experimental Engineering and Sciences, Honolulu,
Hawaii, March 17-22, 2008.
- Titanium
Based Alloy Chemistry
Optimization for Maximum Strength, Minimum Weight and Minimum Cost
Using JMatPro and IOSO Software (with Kumar, A. and Egorov, I. N.), TMS
Annual Meeting, Materials Informatics: Enabling Integration of Modeling
and Experiments in Materials Science, ed: Rajan, K., New Orleans, LA,
March 9-13, 2008.
- Electro-Thermo-Hydrodynamic
Control
of
Solidification
of
Binary
Mixtures
(with
Colaco,
M.
J.),
9th
International
Symposium
on
Fluid
Control,
Measurement
and Visualization
– FLUCOME 2007, ed. Chen, C.-Y., Florida State University, Tallahassee,
FL, Sept. 16-19, 2007.
- Statistical Modeling
of Rarefied
Gas Flows in Microchannels (with Gokaltun, S., Skudarnov, P. V. and
Sukop, M. C.), paper AIAA-2007-4583, 18th AIAA Computational Fluid
Dynamics Conference, Miami, FL, June 25-28, 2007.
- Lattice Boltzmann
Method for
Steady Gas Flows in Microchannels With Imposed Slip Wall Boundary
Condition (with Gokaltun, S.), 5th International ASME Conference on
Nanochannels, Microchannels and Minichannels (ICNMM07), Universidad de
la Americas, Puebla, Mexico, June 18-20, 2007.
- Approximation
of the Likelihood
Function in the Bayesian Technique for the Solution of Inverse Problems
(with Orlande, H.R.B. and Colaco, M.J.), International Symposium on
Inverse Problems, Design and Optimization (IPDO-2007), (eds.:
Dulikravich, G.S., Orlande, H.R.B., Tanaka, M. and Colaco, M.J.), Miami
Beach, FL, April 16-18, 2007.
- Multiobjective
Nonlinear
Shape
Optimization of Stent Based on Evolution Principles (with
Annicchiarico, W.), International Symposium on Inverse Problems, Design
and Optimization (IPDO-2007), (eds.: Dulikravich, G.S., Orlande,
H.R.B., Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 16-18,
2007.
- A Comparison
of Two Methods for
Fitting High Dimensional Response Surfaces (with Colaco, M. J. and
Sahoo, D.), International Symposium on Inverse Problems, Design and
Optimization (IPDO-2007), (eds.: Dulikravich, G.S., Orlande, H.R.B.,
Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 16-18, 2007.
- Inverse Approaches to
Drying of
Sliced Foods (with Kanevce, G. H., Kanevce, Lj. P., and Mitrevski, V.
B.), International Symposium on Inverse Problems, Design and
Optimization (IPDO-2007), (eds.: Dulikravich, G.S., Orlande, H.R.B.,
Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 16-18, 2007.
- Inverse Approaches in
Improvement of Air Pollution Plume Dispersion Models for Regulatory
Applications (with Kanevce, G. H., Kanevce, Lj. P., and Andreevski, I.
B.), International Symposium on Inverse Problems, Design and
Optimization (IPDO-2007), (eds.: Dulikravich, G.S., Orlande, H.R.B.,
Tanaka, M. and Colaco, M.J.), Miami Beach, FL, April 16-18, 2007.
- Controlling
Solidification of
Particle Laden Melts Using Thermo-Magnetohydrodynamics and Optimization
(with Colaco, M. J.), Symposium on Processing for Reliability, (ed:
Mullins, W. M.), Materials Science & Technology 2006, Cincinnati,
OH, October 15-19, 2006.
- Evolutionary Wavelet
Neural
Network for Large Scale Function Estimation in Optimization (with
Sahoo, D.), AIAA Paper AIAA-2006-6955, 11th AIAA/ISSMO
Multidisciplinary Analysis and Optimization Conference, Portsmouth, VA,
September 6-8, 2006.
- Multi-Objective
Hybrid
Evolutionary Optimization With Automatic Switching (with Moral, R. J.
and Sahoo, D.), AIAA Paper AIAA-2006-6976, 11th AIAA/ISSMO
Multidisciplinary Analysis and Optimization Conference, Portsmouth, VA,
September 6-8, 2006.
- Inverse Approaches to
Drying
With and Without Shrinkage (with Kanevce, G., Kanevce, Lj., Mitrevski,
V. and Orlande, H. R. B.), Proceedings of 15th International Drying
Symposium (IDS 2006), (eds: Farkas, I.), Vol. A, pp. 576-584, Budapest,
Hungary, August 20-23, 2006.
- Multi-Objective
Design
Optimization of Topology and Performance of Branching Networks of
Cooling Passages, (with Gonzalez, M. J., Moral, R. J., Sahoo, D. and
Martin, T. J. M.), ASME paper ICNMM2006-96151, ASME Fourth
International Conference on Nanochannels, Microchannels and
Minichannels, (eds.: Kandlikar, S.) University of Limerick, Limerick,
Ireland, June 19-21, 2006.
- Evolutionary
Optimization of
Chemistry of Bulk Metallic Glasses (with Egorov, I. N. and Jelisavcic,
N.), III European Conference on Computational Solid and Structural
Mechanics (eds: Mota Soares, C. A., Martins, J.A.C., Rodrigues, H.C.,
Ambrosio, J.A.C., Pina, C.A.B., Mota Soares, C.M., Pereira, E.R.B. and
Folgado, J.), Springer, Lisbon, Portugal, June 5-8, 2006.
- Optimizing Chemistry
of Bulk
Metallic Glasses for Improved Thermal Stability (with Egorov, I. N.),
Symposium on Bulk Metallic Glasses, TMS 2006 Annual Meeting &
Exhibition, eds: Liaw, P. K. and Buchanan, R. A., San Antonio, TX,
March 12-16, 2006.
- Magnetohydrodynamic
Optimization
of the Fluid Flow During Solidification of Binary Mixtures in
Enclosures (with Colaco, M. J.), 18th International Congress of
Mechanical Engineering, Ouro Preto, Mato Groso, Brazil, November 6-11,
2005.
- Design Optimization
of Networks
of Cooling Passages (with Jelisavcic, N., Martin, T.J., Moral, R.,
Sahoo, D. and Gonzalez, M.), ASME paper IMECE2005-79175, ASME IMECE,
Orlando, FL, November 5-11, 2005.
- Design of Alloy’s
Concentrations
for Optimized Strength, Temperature, Time-to-Rupture, Cost and Weight
(with Egorov, I. N.), Sixth International Special Emphasis Symposium on
Superalloys 718, 625, 706 and Derivatives, eds: Loria, E. A., TMS
Publications, Pittsburgh, PA, October 2-5, 2005, pp. 419-428.
- Aero-Thermal-Elasticity-Materials
Optimization
of
Cooled
Gas
Turbine
Blades:
Summary
(with
Martin,
T.
J.,
Dennis,
B.
H.
and
Egorov,
I.
N.), EUROGEN 05 - Evolutionary and
Deterministic Methods for Design, Optimisation and Control with
Applications to Industrial and Societal Problems, (eds: R. Schilling,
W. Haase, J. Periaux, H. Baier, G. Bugeda), Munich, Germany, September
12-14, 2005.
- A Multi-Objective
Evolutionary
Hybrid Optimizer (with Moral, R. and Sahoo, D.), EUROGEN 05 -
Evolutionary and Deterministic Methods for Design, Optimisation and
Control with Applications to Industrial and Societal Problems, (eds: R.
Schilling, W. Haase, J. Periaux, H. Baier, G. Bugeda), Munich, Germany,
September 12-14, 2005.
- Self-Adapting Response Surface
Optimization of Alloying Elements Concentrations for Specified
Strength, Temperature, Time-to-Rupture, Cost and Weight (with Egorov,
I. N.), Advances in Computational Mechanics and Optimization: Symposium
in honor of Prof. Subrata Mukherjee's 60th birthday, 8th National
Congress of Computational Mechanics, Austin, TX, July 25-27, 2005.
- Energetics and Dynamical
Pathways of Dislocation Cross-slip in Copper (with Pendurti, S., Lee,
I.-H., and Jun, S.), 8th National Congress of Computational Mechanics,
Austin, TX, July 25-27, 2005.
- Estimation of
Spatially and Time
Dependent Source Term in a Two-Region Problem (with Silva, P. P.,
Orlande, H. R. B., Colaco, M. J., Shiakolas, P. S.), 5th International
Conference on Inverse Problems in Engineering: Theory and Practice,
(ed. Lesnic, D.), Cambridge, U.K., July 11-15, 2005.
- Inverse Approaches to
Drying of
Bodies With Significant Shrinkage Effects (with G. H. Kanevce, L. P.
Kanevce, V. B. Mitrevski, H.R.B. Orlande), 5th International Conference
on Inverse Problems in Engineering: Theory and Practice, (ed. Lesnic,
D.), Cambridge, UK, July 11-15, 2005.
- Robust Optimization
of
Concentrations of Alloying Elements in Steel for Maximum Temperature,
Strength, Time-to-Rupture and Minimum Cost and Weight (with
Yegorov-Egorov, I. N.), Invited Lecture, ECCOMAS – Computational
Methods for Coupled Problems in Science and Engineering, (eds:
Papadrakakis, M., Onate, E., Schrefler, B.), Fira, Santorini Island,
Greece, May 25-28, 2005.
- Obtaining
Pre-Specified
Concentration Profiles in Thermosolutal Flows by Applying Magnetic
Fields Having Optimized Intensity Distribution (with Colaco, M. J.),
Invited Lecture, ECCOMAS – Computational Methods for Coupled Problems
in Science and Engineering, (eds: Papadrakakis, M., Onate, E.,
Schrefler, B.), Fira, Santorini Island, Greece, May 25-28, 2005.
- A Multilevel Hybrid
Optimization
of Magnetohydrodynamic Problems in Double-Diffusive Fluid Flow (with
Colaco, M. J.), SMEC 2005 Conference (ed: Saxena, S.), Miami Beach, FL,
April 17-21, 2005.
- Inverse and
Optimization
Problems in Heat Transfer (with Colaco, M. J. and Orlande, H.R.B.),
Invited Lecture, 10th Brazilian Congress of Thermal Sciences and
Engineering – ENCIT2004, Rio de Janeiro, RJ, Brazil, November 29 -
December 3, 2004.
- Aero-Thermal-Elasticity-Materials
Optimization
of Cooled Gas Turbine Blades: Part I (with Martin, T. J.,
Dennis, B. H. and Egorov, I. N.), in Lecture Series on Numerical
Optimization Methods & Tools for Multi-Criteria/Multi-Disciplinary
Design with Applications to Aeronautics and Turbomachinery, Von Karman
Institute for Fluid Dynamics, Belgium, November 15 – 19, 2004.
- Aero-Thermal-Elasticity-Materials
Optimization
of Cooled Gas Turbine Blades: Part II (with Martin, T. J.,
Dennis, B. H. and Egorov, I. N.), in Lecture Series on Numerical
Optimization Methods & Tools for Multi-Criteria/Multi-Disciplinary
Design with Applications to Aeronautics and Turbomachinery, Von Karman
Institute for Fluid Dynamics, Belgium, November 15 – 19, 2004.
- Inverse Determination
of Steady
Boundary Conditions in Heat Transfer and Elasticity (with Dennis, B.
H., Martin, T. J.), Invited Lecture, mini-symposium on “Inverse
Problems in Engineering Mechanics”, 6th World Congress on Computational
Mechanics, Beijing, China, Sept. 5-10, 2004.
- Control of Flow
Separation Over
a Circular Cylinder With Electro-Magnetic Fields: Numerical Simulation,
(with Dennis, B. H. and Yoshimura, S.), Invited Lecture, mini-symposium
on “Computational Electro-magneto-hydro-dynamics”, 6th World Congress
on Computational Mechanics, Beijing, China, Sept. 5-10, 2004.
- Optimization of Alloy
Chemistry
for Maximum Stress and Time-to-Rupture at High Temperature (with
Yegorov-Egorov, I. N.), paper AIAA-2004-4348, 10th AIAA/ISSMO
Multidisciplinary Analysis and Optimization Conference, Albany, NY,
Aug. 30 – Sept. 1, 2004.
- Convective Heat
Transfer Control
Using Magnetic and Electric Fields (with Colaco, M. J.), Keynote
Lecture, International Thermal Science Seminar - ITSS II,
ASME-ICHMT-ZSIS, (eds: Bergles, A. E., Golobic, I., Amon, C. H. and
Bejan, A.), Bled, Slovenia, June 13-16, 2004, pp. 133-144.
- Inverse Problem of Aircraft
Structural Parameter Estimation: Application of Neural Networks, (with
Trivailo, P., Sgarioto, D. and Gilbert, T.), International Symposium on
Inverse Problems, Design and Optimization – IPDO, Vol. II, (eds.:
Colaço, M.J., Dulikravich, G. S. and Orlande, H.R.B.), Rio de
Janeiro, Brazil, March 17-19, 2004, pp. 330-337.
- Inverse Design of
Alloys for
Specified Stress, Temperature and Time-to-Rupture by Using Stochastic
Optimization (with Yegorov-Egorov, I. N.), International Symposium on
Inverse Problems, Design and Optimization – IPDO, (eds: Colaco, M. J.,
Dulikravich, G. S. and Orlande, H. R. B.), Rio de Janeiro, Brazil,
March 17-19, 2004.
- Aerodynamic Data
Modeling Using
Support Vector Machines (with Fan, H.-Y. and and Han, Z.-X.), AIAA
paper 03-13510, AIAA Aerospace Sciences Meeting, Reno, NV, January
10-13, 2004.
- Determination of
Temperatures
and Heat Fluxes on Surfaces and Interfaces of Multi-domain
Three-Dimensional Electronic Components (with Dennis, B. H. and Han,
Z.-X.), ASME paper IMECE2003-42273, Symposium on Cooling of
Microlectronics, MEMS, Photonics, and Nano Devices, ASME IMECE 2003,
Washington, DC, November 16-21, 2003.
- Optimization of Wall
Electrodes
for Electro-Hydrodynamic Control of Natural Convection Effects During
Solidification (with Colaco, M. J. and Martin, T. J.), ASME paper
IMECE2003-41703, ASME IMECE 2003, Washington, DC, November 16-21, 2003.
- An Analytical Model
of Phase
Changing Chemically Reacting Flows (with Colaco, M. J.), ASME paper
IMECE2003-41702, ASME IMECE 2003, Washington, DC, November 16-21, 2003.
- A Comparison of Two
Solution
Techniques for the Inverse Problem of Simultaneously Estimating the
Spatial Variations of Diffusion Coefficients and Source Terms (with
Rodrigues, F. and Colaco, M. J. and Orlande, H. R. B.), ASME paper
IMECE2003-42058, ASME IMECE 2003, Washington, DC, November 16-21, 2003.
- Improvements to
Mutation Donor
of Differential Evolution (with Fan, H.-Y. and Lampinen, J.),
EUROGEN2003 - International Congress on Evolutionary Methods for
Design, Optimization and Control with Applications to Industrial
Problems, (eds: G. Bugeda, J. A- Désidéri, J. Periaux, M.
Schoenauer and G. Winter), CIMNE, Barcelona, Spain, September 15-17,
2003.
- Reducing Convection
Effects in
Solidification by Applying Magnetic Fields Having Optimized Intensity
Distribution (with Colaco, M. J. and Martin, T. J.), Keynote Lecture,
ASME paper HT2003-47308, ASME Summer Heat Transfer Conference, Las
Vegas, NV, July 21-23, 2003.
- An Inverse Method for
Drying
Processes at High Mass Transfer Biot Number (with Kanevce, G. and
Kanevce, Lj.), ASME paper HT2003-40146, ASME Summer Heat Transfer
Conference, Las Vegas, NV, July 21-23, 2003.
- Inverse Determination
of Eroded
Smelter Wall Thickness Variation Using an Elastic Membrane Concept
(with Baker, D. P., Dennis, B. H. and Martin, T. J.), ASME paper
HT2003-47307, ASME Summer Heat Transfer Conference, Las Vegas, NV, July
21-23, 2003.
- Optimization of
Perfusion
Freezing Protocols for Preservation of Three-Dimensional Organs (with
Dennis, B. H.), 2003 Bioengineering Summer Conference, Key Biscayne,
FL, June 26-31, 2003.
- Optimization of a
Large Number
of Coolant Passages Located Close to the Surface of a Turbine Blade
(with Dennis, B. H., Egorov, I. N. and Yoshimura, S.), ASME paper
GT2003-38051, ASME Turbo Expo 2003, Atlanta, GA, June 16-19, 2003.
- Parallel
Thermoelasticity
Optimization of 3-D Serpentine Cooling Passages in Turbine Blades (with
Dennis, B. H., Egorov, I. N., Sobieczky, H. and Yoshimura, S.), ASME
paper GT2003-38180, ASME Turbo Expo 2003, Atlanta, GA, June 16-19, 2003.
- Calibration of
Microprocessor
Control Systems for Specified Levels of Engine Exhaust Toxicity (with
Egorov, I. N.), 2003 JUMV Conference - Science and Motor Vehicles, (ed:
Duboka, C.), Belgrade, Serbia and Montenegro, May 27-28, 2003.
- Brain Cooling
Strategies:
Numerical Simulations on a Realistic Human Head Geometry (with Dennis,
B. H., Eberhart, R. C. and Radons, S. W.), 5th International Conference
on Simulations in Biomedicine, Ljubljana, Slovenia, April 2-4, 2003.
- Semi-Stochastic
Optimization of
Chemical Composition of High-Temperature Austenitic Steels for Desired
Mechanical Properties (with Egorov, I. N., Sikka, V. K. and
Muralidharan, G.), 2003 TMS Annual Meeting, Yazawa International
Symposium: Processing and Technologies, TMS Publication, (eds: Kongoli,
F., Itakagi, K., Yamaguchi, C. and Sohn, H.-Y.), Vol. 1, pp. 801-814,
San Diego, CA, March 2-6, 2003.
- Optimization of
Intensities and
Orientations of Magnets Controlling Melt Flow During Solidification
(with Colaco, J. M., Dennis, B. H., Martin, T. J. and Lee, S.),
Symposium on Materials Processing Under the Influence of Electrical and
Magnetic Fields, 2003 TMS Annual Meeting, San Diego, CA, March 2-6,
2003.
- Magnetized Fiber
Orientation and
Concentration Control in Solidifying Composites (with Colaco, M.,
Martin, T. J. and Lee, S.), Symposium on Materials Processing Under the
Influence of Electrical and Magnetic Fields, 2003 TMS Annual Meeting,
San Diego, CA, March 2-6, 2003.
- Non-Destructive Inverse
Determination of Refractory Wall Material Wear Configurations in
Melting Furnaces (with Baker, D. P., Martin, T. J. and Dennis, B.H.),
2003 TMS Annual Meeting, San Diego, CA, March 2-6, 2003.
- Estimation of
Thermophysical
Properties of a Drying Body at High Mass Transfer Biot Number (with
Kanevce, G. and Kanevce, Lj.), International Symposium on Inverse
Problems in Engineering Mechanics – ISIP’03, (ed: Tanaka, M.), Nagano,
Japan, February 18-21, 2003, Elsevier, pp. 13-20.
- Inverse Determination
of Smelter
Wall Erosion Shapes Using a Fourier Series Method (with Baker, D.
P. and Martin, T. J.), International Symposium on Inverse Problems in
Engineering Mechanics – ISIP’03, (ed: Tanaka, M.), Nagano, Japan,
February 18-21, 2003,Elsevier, pp. 231-240.
- Finite Element Simulation of
Cooling of 3-D Human Head and Neck (with Dennis, B. H., Eberhart, R. C.
and Radons, S. W.), ASME IMECE 2002, paper IMECE2002-HT-32045, New
Orleans, LA, November 17-22, 2002.
- Simultaneous Estimation of
Spatially-Dependent Diffusion Coefficient and Source Term in Nonlinear
1-D Diffusion (with Rodrigues, F. A. and Orlande, H. R. B.), Workshop
on Inverse Obstacle Problems, Lisbon, Portugal, November 4-6, 2002.
- Implicit and Explicit
Sensitivities for Optimization of Cooled Turbine Blades (with Martin,
T. J.), 9th AIAA/ISSMO Multidisciplinary Analysis & Optimization
Symposium, paper AIAA-2002-5435, Atlanta, GA, Sept. 4-6, 2002.
- A 3-D Finite Element
Formulation
for the Determination of Unknown Boundary Conditions for Steady
Thermoelastic Problems (with Dennis, B. H. and Yoshimura, S.), Keynote
Lecture, mini-symposium on “Computational Treatment of Inverse Problems
in Mechanics” at the 5th World Congress on Computational Mechanics
(WCCM-V), Vienna, Austria, July 7 – 12, 2002.
- Multi-Disciplinary Hybrid and
Evolutionary Optimization (with Dennis, B. H., Martin, T. J. and
Egorov, I. N.), Invited Lecture, minisymposium on “Evolutionary
Algorithms in Engineering Optimization”, at the 5th World Congress on
Computational Mechanics (WCCM-V), Vienna, Austria, July 7 – 12, 2002.
- Parameterized Structures for
Inverse Design and Optimization (with Sobieczky, H. and Dennis, B. H.),
4th International Conference on Inverse Problems in Engineering: Theory
and Practice (4icipe), Angra dos Reis, Brazil, May 26-31, 2002.
- Estimation of Drying
Food
Thermophysical Properties by Using Temperature Measurements (with
Kanevce, Lj. and Kanevce, G. H.), 4th International Conference on
Inverse Problems in Engineering: Theory and Practice (4icipe), Angra
dos Reis, Brazil, May 26-31, 2002.
- Estimation of
Thermophysical
Properties of Moist Materials Under Different Drying Conditions (with
Kanevce, G. H., Kanevce, Lj. and Orlande, H. R. B.), 4th International
Conference on Inverse Problems in Engineering: Theory and Practice
(4icipe), Angra dos Reis, Brazil, May 26-31, 2002.
- Rotor Cascade Shape Optimization
With Unsteady Passing Wakes Using Implicit Dual Time Stepping and
Genetic Algorithm (with Lee, E.-S. and Dennis, B. H.), ASME ISROMAC-9
Conference, Hawaii, February 10-14, 2002.
- Inverse Determination
of Steady
Surface Temperatures and Heat Fluxes on Arbitrary 3-D Objects (with
Dennis, B. H.), paper ASME IMECE2001/HTD-24310, New York, November
11-16, 2001.
- Analysis and
Multi-disciplinary
Optimization of Internal Coolant Networks in Turbine Blades (with
Martin, T. J.), paper ASME IMECE2001/HTD-24316, New York, November
11-16, 2001.
- Multi-disciplinary
Design
Optimization (with Dennis, B. H., Martin, T. J. and Egorov, I. N.),
Invited Lecture, EUROGEN 2001 - Evolutionary Methods for Design,
Optimization and Control with Applications to Industrial Problems,
(ed.: Giannakoglou, K., Tsahalis, D. T., Periaux, J. and Fogarty, T.),
Athens, Greece, Sept. 19-21, 2001, Published by International Center
for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, pp.
11-18.
- Multi-disciplinary Analysis and
Design Optimization (with Dennis, B. H., Martin, T. J. and Egorov, I.
N.), Invited Lecture, Mini-Symposium on Inverse Problems - State of the
Art and Future Trends, XXIV Brazilian Congress on Applied and
Computational Mathematics, Sept. 10-13, 2001, Belo Horizonte, Brazil.
- Multi-disciplinary
Inverse
Design (with Martin, T. J. and Dennis, B. H.), Invited Lecture,
Mini-Symposium on Inverse Problems - State of the Art and Future
Trends, XXIV Brazilian Congress on Applied and Computational
Mathematics, Sept. 10-13, 2001, Belo Horizonte, Brazil.
- Stokes’ Hypothesis
and
Compression Shock Structure, Proceedings of 23rd International
Symposium on Shock Waves,(ed. Lu, F. and Wilson, D.), Fort Worth,
Texas, July 23-27, 2001, pp. 158.
- Magnetic Field
Suppression of
Melt Flow in Crystal Growth (with Dennis, B. H.), International
Symposium on Advances in Computational Heat Transfer - CHT’01, (eds.:
de Vahl Davis, G. and Leonardi, E.), Palm Cove, Queensland, Australia,
May 20-25, 2001, Begell House, Inc., New York, Vol. 2, pp. 1145-1152.
- Simultaneous Estimation of
Thermophysical Properties and Heat and Mass Transfer Coefficients of a
Drying Body (with Kanevce, G. H. and Kanevce, Lj.), International
Symposium on Inverse Problems in Engineering Mechanics – ISIP’01, (eds:
Tanaka, M. and Dulikravich, G. S.), Nagano, Japan, February 6-9, 2001,
Elsevier, Amsterdam, pp. 3-12.
- A 3-D Finite Element
Formulation
for the Determination of Unknown Boundary Conditions in Heat Conduction
(with Dennis, B. H.), International Symposium on Inverse Problems in
Engineering Mechanics – ISIP’01, (eds: Tanaka, M. and Dulikravich, G.
S.), Nagano, Japan, February 6-9, 2001.
- Electromagnetohydrodynamics
(EMHD):
Numerical
Experiments
in
Steady
Planar
Flows
(with
Dennis,
B.
H.),
Symposium
on
Recent
Advances
in
the
Mechanics of Structured
Continua, (eds: Massoudi, M. and Rajagopal, K. R.), ASME IMECE 2K,
Orlando, FL, Nov. 5-10, 2000, AMD-Vol. 244/MD.-Vol. 92, pp. 17-24.
- Optimization of Organ
Freezing
Protocols With Specified Allowable Thermal Stress Levels (with Dennis,
B. H. and Rabin, Y.), Symposium on Advances in Heat and Mass Transfer
in Biotechnology, (eds: Scott, E. P. and Bischof, J. C.), ASME IMECE
2K, Orlando, FL, Nov. 5-10, 2000, HTD-Vol. 368/BED-Vol. 47, pp. 33-48.
- Simulation of
Magnetohydrodynamics With Heat Transfer (with Dennis, B. H.),
ECCOMAS2000 (European Congress on Computational Methods in Applied
Sciences and Engineering), (ed: Onate, E., Bugeda, G. and Suarez, B.),
Barcelona, Spain, September 11-14, 2000.
- Inverse Design and
Optimization
Using CFD (with Dennis, B. H.), Session on Contributions to Automated
Design Using CFD, ECCOMAS2000 European Congress on Computational
Methods in Applied Sciences and Engineering, (eds: Onate, E., Bugeda,
G. and Suarez, B.), Barcelona, Spain, September 11-14, 2000, pp. 595.
- Multi-Objective
Optimization of
Turbomachinery Cascades for Minimum Loss, Maximum Loading, and Maximum
Gap-to-Chord Ratio (with Dennis, B. H., Egorov, I. N., Han, Z.-X., and
Poloni, C.), AIAA Paper 2000-4876, 8th AIAA/NASA/USAF/ISSMO Symposium
on Multidisciplinary Analysis and Optimization, Long Beach, CA,
September 6-8, 2000.
- Moisture Diffusivity
Estimation
from Temperature Measurements: Influence of Measurement Accuracy (with
Kanevce, G. H., Kanevce, Lj. P. and Mitrevski, V. B.), 12th
International Drying Symposium (IDS2000), Noordwijkerhout, The
Netherlands, August 28-31, 2000.
- Heat Transfer, Inverse
Problems, and Multidisciplinary Design Optimization (with Martin, T. J.
and Dennis. B. H.), Proceedings of a Conference of International
Society for Computational Engineering & Sciences (ISCES), Los
Angeles, CA, August 21-25, 2000, (editors: Atlury, S. N. and Brust, F.
W.), Vol. I, Tech Science Press, pp. 868-873.
- Influence of
Boundary
Conditions on Moisture Diffusivity Estimation by Temperature Response
of a Drying Body (with Kanevce, G. H. and Kanevce, Lj. P.), ASME
National Heat Transfer Conference, Pittsburgh, PA, August 20-22, 2000,
ASME paper NHTC2000-12296.
- Inverse
Determination of
Temperature-Dependent Thermal Conductivity Using Steady Surface Data on
Arbitrary Objects (with Martin, T. J.), Symposium on Inverse Thermal
Problems, ASME National Heat Transfer Conference, (editors: G. S.
Dulikravich, K. Woodbury and B. F. Blackwell), Pittsburgh, PA, August
20-22, 2000, ASME paper NHTC2000-12038.
- Simulation of
Electro-Magneto-Hydro-Dynamics (EMHD) with p-Version Least-Squares
Finite Element Method (with Dennis, B. H.), International Conference on
Finite Elements in Flow Problems 2000, Austin, TX, April 30 - May 4,
2000.
- Determination of
Unsteady
Container Temperatures During Freezing of Three-dimensional Organs With
Constrained Thermal Stresses (with Dennis, B. H.), International
Symposium on Inverse Problems in Engineering Mechanics – ISIP’2k,
(editors: M. Tanaka and G. S. Dulikravich), Nagano, Japan, March 7-10,
2000, Elsevier Science Ltd, Amsterdam, pp. 139-148.
- Moisture Diffusivity
Estimation
by Temperature Response of a Drying Body (with Kanevce, G. H. and
Kanevce, Lj. P.), International Symposium on Inverse Problems in
Engineering Mechanics – ISIP’2k, (editors: M. Tanaka and G. S.
Dulikravich), Nagano, Japan, March 7-10, 2000, Elsevier Science Ltd,
Amsterdam, pp. 43-52.
- Metamodel Integration
Technology for Multidisciplinary Design (with Barton, R. R.), 2000 NSF
Design & Manufacturing Grantees Conference, Vancouver, Canada,
January 5-8, 2000.
- Non-Reflective
Boundary
Conditions for a Consistent Model of Axisymmetric
Electro-Magneto-Hydrodynamic Flows (with Ko, H.-J.), Symposium on
Rheology and Fluid Mechanics of Nonlinear Materials, ASME IMECE’99,
Editor: D. A. Siginer, Nashville, TN, November 14-19, 1999, ASME
FED-Vol. 249, pp. 97-104.
- Maximizing
Multistage Axial Gas
Turbine Efficiency Over a Range of Operating Conditions (with Petrovic,
M. V. and Martin, T. J.), Proceedings of 10TH Thermal & Fluids
Analysis Workshop (TFAWS’99), Ed: L. W. Griffin, NASA Marshall Space
Flight Center, Huntsville, AL, Sept. 13-17, 1999.
- Non-Reflective
Boundary
Conditions for a Consistent Two-dimensional Planar
Electro-Magneto-Hydrodynamic Flow Model (with H.-J. Ko), Forum on
Functional Fluids, 1999 Joint ASME/JSME Fluids Engineering Conference,
Editors: G. S. Dulikravich, S. Sawada, and K. Yamane, San Francisco,
CA, July 18 - 23, 1999.
- Multidisciplinary
Inverse
Problems (with Martin, T. J. and Dennis, B. H.), Invited Lecture, 3rd
International Conference on Inverse Problems in Engineering (3icipe):
Theory and Practice, Editor: K. Woodbury, Port Ludlow-Puget Sound, WA,
June 13-18, 1999; ASME Engineering Foundation, pp.1-8.
- Metamodel Integration
Technology for Multidisciplinary Design, (with R. R. Barton), 1999 NSF
Design & Manufacturing Grantees Conference, Los Angeles, CA,
January 5-8, 1999.
- Multidisciplinary Inverse
Design and Optimization of Gas Turbine Blades, 1999 NSF Design &
Manufacturing Grantees Conference, Los Angeles, CA, January 5-8, 1999.
- Simultaneous
Determination of
Temperatures, Heat Fluxes, Deformations, and Tractions on Inaccessible
Boundaries (with B. H. Dennis), Symposium on Inverse Problems in
Mechanics, ASME IMECE’98, Editors: L. G. Olson and S. Saigal, Anaheim,
CA, Nov. 15-20, 1998, ASME AMD-Vol. 228, pp. 1-10.
- A Fully Non-Linear
Theory of
Electro-Magneto-Hydrodynamics (with H.-J. Ko), Symposium on Rheology
and Fluid Mechanics of Non-Linear Materials, ASME IMECE’98, Editors: D.
A. Siginer and D. De Kee, Anaheim, CA, Nov. 15-20, 1998, ASME FED-Vol.
246/MD-Vol.81, pp. 173-182.
- Aero-Thermal
Optimization of
Internally Cooled Turbine Blades (with T. J. Martin and Z.-X. Han),
Minisymposium on Multidisciplinary-Optimum Design, Fourth ECCOMAS
Computational Fluid Dynamics Conference, Editors: K. Papailiou, D.
Tsahalis, J. Periaux, D. Knoerzer, Athens, Greece, September 7-11,
1998, Vol. 2, pp.158-161, John Wiley & Sons, New York.
- Aero-Thermo-Structural
Design
Optimization
of Cooled Turbine Blades (with T. J. Martin, B. H. Dennis,
E.-S. Lee, and Z.-X. Han), AGARD - AVT Propulsion and Power Systems
Symposium on Design Principles and Methods for Aircraft Gas Turbine
Engines, NATO-RTO-MP-8 AC/323(AVT)TP/9, Ch. 35, Toulouse, France, May
11-15, 1998.
- Fourier Series
Solution for
Inverse Design of Aerodynamic Shapes (with D. P. Baker), International
Symposium on Inverse Problems in Engineering Mechanics – ISIP’98,
Editors: M. Tanaka and G.S. Dulikravich, Nagano City, Japan, March
24-27, 1998, Elsevier Science, pp. 427-436.
- A Finite Element
Formulation
for the Detection of Boundary Conditions in Elasticity and Heat
Conduction (with B. H. Dennis), International Symposium on Inverse
Problems in Engineering Mechanics – ISIP’98, Editors: M. Tanaka and G.
S. Dulikravich, Nagano, Japan, March 24-27, 1998, Elsevier Science, pp.
61-70.
- Boundary Conditions
for
Electro-Magneto-Hydrodynamics (with Y.-H. Jing ), Symposium on Rheology
and Fluid Mechanics of Non-Linear Materials, Editors: S. G. Advani and
D. A. Siginer, ASME IMECE'97, Dallas, TX, Nov. 16-21, 1997, ASME
FED-Vol. 243/MD-Vol. 78, pp. 101-117.
- Thermo-Elastic
Analysis and
Optimization Environment for Internally Cooled Turbine Airfoils (with
B. H. Dennis), XIII International Symposium on Airbreathing Engines
(XIII ISABE), Editor: F. S. Billig, Chattanooga, TN, Sept. 8-12, 1997,
ISABE 97-7181, Volume 2, pp. 1335-1341.
- Aero-Thermal
Analysis and
Optimization of Internally Cooled Turbine Airfoils (with T. J. Martin),
XIII International Symposium on Airbreathing Engines (XIII ISABE),
Editor: F. S. Billig, Chattanooga, TN, Sept. 8-12, 1997, ISABE 97-7165,
Volume 2, pp. 1232-1250.
- Inverse
Determination of Steady
Local Convective Heat Transfer Coefficients (with T. J. Martin),
Symposium on Inverse Design Problems in Heat Transfer and Fluid Flow,
Editors: G. S. Dulikravich and K. A. Woodbury, ASME National Heat
Transfer Conference, Baltimore, MD, August 10-12, 1997, ASME HTD-Vol.
340, Volume 2, pp. 151-158.
- Non-Iterative
Inverse
Determination of Temperature-Dependent Thermal Conductivities (with T.
J. Martin), Symposium on Inverse Design Problems in Heat Transfer and
Fluid Flow, Editors: G. S. Dulikravich and K. A. Woodbury, ASME
National Heat Transfer Conference, Baltimore, MD, August 10-12, 1997,
ASME HTD-Vol. 340, Volume 2, pp. 141-150.
- Multidisciplinary
Inverse
Problems and Solution Methods, (Invited Lecture with T. J. Martin),
Advanced Technology in Experimental Mechanics - ATEM97, Editor: Y.
Morimoto, Wakayama City, Osaka, Japan, July 25-26, 1997, pp. 83-88.
- Software for Solving
Thermoelastic Problems on Arbitrary Domains Using Multigrid and
Adaptive Mesh Refinement (with Dennis, B. H.). Third IMACS
International Symposium on Iterative Methods in Scientific Computation,
Jackson, WY, July 9-12, 1997.
- Inverse
Determination of
Boundary Conditions in Multi-domain Heat Transfer Problems, (Invited
Lecture with T. J. Martin), BETECH '97 - 9th International Conference
on Boundary Element Technology, Editor: J. Frankel, Knoxville, TN,
April 9-11, 1997, pp. 99-110.
- Multidisciplinary
Inverse
Design and Optimization of Turbine Blades, 1997 National Science
Foundation Design and Manufacturing Grantees Conference, Seattle, WA,
January 7-10, 1997, pp. 29-30.
- Inverse
Determination of
Temperatures and Heat Fluxes on Surfaces of 3-D Objects (with T. J.
Martin), PanAmerican Congress of Applied Mechanics (PACAM-V), San Juan,
Puerto Rico, January 2-4, 1997, in Applied Mechanics in the Americas,
Editors: M. Rysz, L. A. Godoy and L. E. Suarez, The University of Iowa,
Iowa City, Vol. 5, pp. 133-136.
- Aero-Thermal-Structural
Optimization (with T. J. Martin and B. H. Dennis), NASA/ICOMP 1996
Coolant Flow Management Workshop, Cleveland, Editors: S. Hippensteele
and J. Gladden, OH, December 12-13, 1996, NASA Conference CP 10195, pp.
311-334.
- Determination of
Temperatures
and Heat Fluxes on Surfaces of Multidomain Three-Dimensional Electronic
Components (with T. J. Martin), Symposium on Application of CAE/CAD to
Electronic Systems, Editors: D. Agonafer, R. E. Fulton, G. J. Kowalski
and P. Cierkus, 1996 ASME Int. Mechanical Engineering Congress and
Exposition, Atlanta, GA, November 17-22, 1996, ASME EEP-Vol. 18, pp.
1-10.
- Fully Conservative
Forms of a
System of Unified Electro-Magneto-Hydrodynamic Equations (with Y.-H.
Jing), Symposium on Rheology and Fluid Mechanics of Nonlinear
Materials, Editors: D. A. Siginer and S. G. Advani, 1996 ASME
International Mechanical Engineering Congress and Exposition, Atlanta,
GA, November 17-22, 1996, AMD-Vol. 217, pp. 309-314.
- Finding Temperatures
and Heat
Fluxes on Inaccessible Surfaces in 3-D Coated Rocket Nozzles (with T.
J. Martin), 1995 JANNAF Non-Destructive Evaluation Propulsion
Subcommittee Meeting, Tampa, FL, Dec. 4-8, 1995, Chemical Propulsion
Information Agency - CPIA Publication 637, Dec. 1995, pp. 119-129.
- Electro-Magneto-Hydrodynamics:
Part
2
-
A
Survey
of
Mathematical
Models
(with
S.
R.
Lynn),
Symposium
on
Developments
in
Electrorheological
Flows-1995, Editors: D. A.
Siginer and G. S. Dulikravich, ASME WAM'95, San Francisco, CA, November
12-17, 1995, ASME FED-Vol. 235, MD-Vol. 71, pp. 59-70.
- Electro-Magneto-Hydrodynamics:
Part
1
-
Introductory
Concepts
(with
S.
R.
Lynn),
Symposium
on
Developments
in
Electrorheological
Flows-1995,
Editors:
D.
A. Siginer
and G. S. Dulikravich, ASME WAM'95, San Francisco, CA, November 12-17,
1995, ASME FED-Vol. 235, MD-Vol. 71, pp. 49-58.
- Inverse
Determination of
Boundary Conditions in Steady Heat Conduction With Heat Generation
(with T. J. Martin), Symposiums on Conjugate Heat Transfer, Inverse
Problems, and Optimization, and Inverse Problems in Heat Transfer,
Editors: W. J. Bryan and J. V. Beck, ASME National Heat Transfer
Conference, Portland, OR, August 6-8,1995, ASME HTD-Vol. 312, pp. 39-46.
- Magnetic Field
Control of
Vorticity in Steady Incompressible Laminar Flows (with K.-Y. Choi and
S. Lee), Symposium on Developments in Electrorheological Flows and
Measurement Uncertainty 1994, ASME WAM'94, Editors: D. A.
Siginer, J. H. Kim, S. A. Sheriff and H. W. Colleman, Chicago, IL,
November 6-11,1994, ASME FED-Vol. 205/AMD-Vol. 190, pp. 125-142.
- An Interactive
Multidisciplinary Analysis, Design & Optimization (MDA&O)
Approach to Electronic Packaging (with N. F. Foster, T. J. Martin and
J. D. Halderman), Symposium on CAE/CAD Application to Electronic
Packaging, ASME WAM'94, Eds: D. Agonafer and R. E. Fulton, Chicago, IL,
November 6-11,1994, ASME EEP-Vol. 9, pp. 15-24.
- An Inverse Method
for Finding
Unknown Surface Tractions and Deformations in Elastostatics (with J. D.
Halderman and T. J. Martin), Symposium on Inverse Problems in
Mechanics, ASME WAM'94, Editors: S. Saigal and L. G. Olson, Chicago,
IL, November 6-11,1994, ASME AMD-Vol. 186, pp. 57-66.
- Inverse Problems and
Design in
Heat Conduction (with T. J. Martin), 2nd IUTAM International Symposium
on Inverse Problems in Engineering Mechanics, Editors: H. D. Bui, M.
Tanaka, M. Bonnet, H. Maigre, E. Luzzato and M. Reynier, Paris, France,
November 2-4, 1994, A. A. Balkema, Rotterdam, 1994, pp. 13-20.
- Convergence Rate
Enhancement of
Navier-Stokes Codes on Clustered Grids (with K.-Y. Choi), 6th Annual
Symposium of the Penn State - NASA Propulsion Eng. Research Center,
NASA Lewis Research Center, Cleveland, OH, September 13-14, 1994, pp.
177-181.
- Finding Unknown
Surface
Temperatures and Heat Fluxes in Steady Heat Conduction (with T. J.
Martin), 4th Intersociety Conference on Thermal Phenomena in Electronic
Systems, Editors: A. Ortega and D. Agonafer, Washington, D. C., May
4-7, 1994, pp. 214-221.
- Convergence Acceleration of
Iterative Algorithms Using a Sensitivity-Based Minimal Residual (SBMR)
Method (with K. Y. Choi), 12th Workshop for Computational Fluid Dynamic
Applications in Rocket Propulsion, NASA Marshall Space Flight Center,
Huntsville, AL, April 19-21, 1994.
- Inverse
Determination of
Temperatures and Heat Fluxes on Inaccessible Surfaces (with T. J.
Martin), 9th International Conference on Boundary Element Technology -
BETECH 94, Computational Mechanics Publications, Southampton, Eds: C.
Brebbia and A. Kassab, Orlando, FL, March 16-18, 1994, pp. 69-76.
- Dielectric Fluids
Solidification With Charged Particles in Electric Fields and Reduced
Gravity (with V. Ahuja), ASME WAM'94, Symposium on Heat Transfer in a
Microgravity, Editors: C. T. Avedisian and V. S. Arpaci, New
Orleans, LA, November 29-December 3, 1993, ASME HTD-Vol. 269, pp.
119-130.
- Inverse Design of
Three-Dimensional Shapes With Overspecified Thermal Boundary
Conditions, Monograph on Inverse Problems in Mechanics, Editor: S.
Kubo, Atlanta Technology Publications, Atlanta, GA, September1993, pp.
128-140.
- Reliability
Enhancement of
Navier-Stokes Codes Through Convergence Enhancement (with K.-Y. Choi),
5th Annual Symposium of the Penn State - NASA Propulsion Engineering
Research Center, Editor: C. L. Merkle, University Park, PA, Sept. 8-9,
1993, pp. 173-178.
- A Direct Approach to
Finding
Unknown Boundary Conditions in Steady Heat Conduction (with T. J.
Martin), 5th Annual Thermal and Fluids Analysis Workshop, Ohio
Aerospace Institute-NASA Lewis Research Center, Editor: D. Darling,
Brookpark, OH, August 16-20, 1993, NASA CP-10122, pp. 137-149.
- Three-Dimensional
Solidification and Melting Using Magnetic Field Control (with V.
Ahuja), 5th Annual Thermal and Fluids Analysis Workshop, Ohio Aerospace
Institute-NASA Lewis Research Center, Editor: D. Darling, Brookpark,
OH, August 16-20, 1993, NASA CP-10122, pp. 449-466.
- Unsteady
Three-Dimensional
Thermal Field Prediction In Turbine Blades Using Nonlinear BEM (with T.
J. Martin), 5th Annual Thermal and Fluids Analysis Workshop, Ohio
Aerospace Institute-NASA Lewis Research Center, Editor: D. Darling,
Brookpark, OH, August 16-20, 1993, NASA CP-10122, pp. 467-476.
- Simulation of
Electrohydrodynamic Enhancement of Laminar Flow Heat Transfer (with V.
Ahuja and S. Lee), ASME National Heat Transfer Conference, Symposium on
Fundamentals of Heat Transfer in Electromagnetic, Electrostatic, and
Acoustic Fields, Editors: Y. Bayazitoglu and V. S. Arpaci, Atlanta, GA,
August 8-11, 1993, ASME HTD-Vol. 248, pp. 43-52.
- Computer Simulation
of Free
Flow Electrophoretic Separation (with S. Lee and V. Ahuja), 2nd
International Conference on Fluid Mechanics (ICFM-II), Editor: Zhang
Zhaosun, Beijing, P. R. China, July 7-10, 1993.
- Computations of
Electro-Thermo-Convective Phenomena in Electro-Rheological Fluids (with
S. Lee and V. Ahuja), ASME Fluids Engineering Conference, Symposium on
Electro-Rheological Flows, Eds: D. A. Siginer, J. H. Kim and R.
A. Bajura, Washington, D. C., June 21-24, 1993, ASME FED-Vol. 164, pp.
29-42.
- Transonic Airfoil
Thickness
Variation Requirements for Maintaining Shock-Free Flow (with H.
Sobieczky), Smart Structures and Materials '93, Editors: N. W. Hagood
and G. J. Knowles, Albuquerque, N.M., February1-4, 1993, SPIE Vol.
1917, pp. 119-124.
- Three-Dimensional
Control of
Crystal Growth Using Magnetic Fields (with V. Ahuja), Smart Structures
and Materials ‘93, Smart Materials, Editor: V. K. Varadan, Albuquerque,
N.M., February 1-4, 1993, SPIE Vol. 1916, pp. 65-75.
- Electrohydrodynamic
Flow
Simulation, Pan American Congress of Applied Mechanics (PACAM-III),
Eds: M. R. M. Crespo da Silva, D. T. Mook, D. L. Zagottis, Sao Paulo,
Brazil, Jan. 4-8, 1993, pp. 303-306.
- Inverse Design of
Super
Elliptic Coolant Passages in Coated Turbine Blades With Specified
Temperatures and Heat Fluxes (with T. J. Martin), AIAA paper 92-4714,
4th AIAA/Air Force/NASA/OAI Symposium of Multidisciplinary Analysis and
Optimization, Cleveland, OH, September 21-23, 1992, pp. .
- Determination of the
Proper
Number, Locations, Sizes and Shapes of Superelliptic Coolant Flow
Passages in Turbine Blades (with T. J. Martin), Proceedings of ICHMT
International Symposium on Heat Transfer in Turbomachinery, August
24-28, 1992, Athens, Greece, in Heat Transfer in Turbomachinery, Eds:
R. J. Goldstein, A. I. Leontiev, D. E. Metzger, Begell House, Inc., New
York, pp. 31-42.
- Magnetized Fiber
Orientation
Control in Solidifying Composites: Numerical Simulation, (with B.
Kosovic), 9th National Heat Transfer Conference, Symposium on Transport
Phenomena in Materials Processing and Manufacturing, San Diego, CA,
Aug. 9-12, 1992, ASME/HTD-Vol. 196, pp. 135-144.
- Unsteady
Solidification in
Microgravity (with B. Kosovic), 9th National Heat Transfer Conference,
Symposium on Topics in Heat Transfer, Eds: R. S. Downing, L. Haas, S.
Chellaiah, E. E. Anderson, K. Vafai, W. S. Chang and G. R. Cunnington,
ASME/HTD-Vol. 206-3, San Diego, CA, Aug. 9-12, 1992, pp. 13-20.
- Aerodynamic Shape
Optimization
of Hypersonic Configurations Including Viscous Effects (with S.
Sheffer), AIAA paper 92-2635, AIAA 10th Applied Aerodynamics
Conference, Palo Alto, June 22-24, 1992, pp. 343-351.
- Inverse Design and
Optimization
in Aerothermodynamics, 4th Annual Symposium on Inverse Problems in
Engineering, Editor: J. V. Beck, Michigan State University, East
Lansing, MI, June 11-12, 1992, pp. 112-127.
- Reliability
Enhancement of
Navier-Stokes Codes Through Convergence Enhancement (with C. Merkle, S.
Venkateswaran, K. Choi and P. Buelow), Conference on Advanced
Earth-to-Orbit Propulsion Technology, Editors: R. J. Richmond and
S. T. Wu, NASA MSFC, Huntsville, AL, May 19-21, 1992, NASA CP-3174,
Vol. 2, pp. 114-123.
- Determination of
Void Shapes,
Sizes and Locations Inside an Object with Known Surface Temperature and
Heat Flux (with T. J. Martin), IUTAM Symposium on Inverse Problems in
Engineering Mechanics, Tokyo, Japan, May 11-16, 1992, Editors: M.
Tanaka and H. D. Bui, Springer-Verlag, 1993, pp. 489-496.
- Inverse Design of
Proper
Number, Shapes, Sizes and Locations of Coolant Flow Passages, 10th
Workshop for Computational Fluid Dynamic Applications in Rocket
Propulsion, NASA Marshall Space Flight Center, Huntsville, AL, April
28-30, 1992, NASA CP-3163, Part 1, pp. 467-486.
- Solidification in
Reduced
Gravity With Magnetic Fields and Temperature-Dependent Physical
Properties (with B. Kosovic and S. Lee), ASME WAM '91, Symposium on
Heat and Mass Transfer in Solidification Processing, Atlanta, GA, Dec.
1-6, 1991, Editors: G. S. Advani and C. Beckermann, HTD-Vol.
175/MD-Vol. 25, pp. 61-73.
- Aerodynamic Shape
Optimization
of Arbitrary Hypersonic Vehicles (with S. Sheffer), 3rd Int. Conf. on
Inverse Design Concepts and Optimization in Engineering Sciences
(ICIDES-III), Editor: G. S. Dulikravich, Washington, DC, Oct. 23-25,
1991, pp. 347-358.
- Freezing Under the
Influence of
a Magnetic Field: Computer Simulation (with B. Kosovic and S.
Lee), 1991 ICHMT International Symposium on Macroscopic and Microscopic
Heat & Mass Transfer in Biomedical Eng., Athens, Greece, Sept. 2-6,
1991, Editors: K. R. Diller and A. Shitzer, Hemisphere Publishing Co.,
1992, pp. 337-356.
- Computation of
Magnetohydrodynamic Flows With Joule Heating and Buoyancy (with S.
Lee), International Aerospace Congress, Melbourne, Australia, May
13-17, 1991.
- Interaction of a
Magnetic Field
With Blood Flow (with B. Kosovic and S. Lee), 17th Annual Northeast
Bioengineering Conference, University of Connecticut, Hartford, CT,
April 4-5, 1991, pp. 79.
- Computer Simulation
of
Electrophoretic Separation Processes, (with B. Kosovic and S. Lee),
17th Annual Northeast Bioengineering Conference, Univ. of Connecticut,
Hartford, CT, April 4-5, 1991, pp. 89.
- Reliability
Enhancement of
Navier-Stokes Codes Through Convergence Acceleration (with S. Lee), 2nd
Pan-American Congress of Applied Mechanics (PACAM), Editors: D. Mook
and P. Kittl, Valpareiso, Chile, January 2-5, 1991, pp. 433-435.
- Acceleration of
Iterative
Algorithms Using Distributed Minimal Residual (DMR) Method (with S.
Lee), 2nd World Congress on Computational Mechanics, Editor: I.
Doltsinis, Stuttgart, F. R. Germany, August 27-31, 1990, pp. 128-131.
- Grid Generation
Using a
Posteriori Optimization With Geometrically Normalized Functionals (with
B. W. Siebert), AIAA paper 90-3048, AIAA Applied Aerodynamics
Conference, Portland, OR, Aug. 20-22, 1990, pp. 917-924.
- Aerodynamic Shape
Optimization
of Hypersonic Missiles (with R. Buss, E. Strang and S. Lee), AIAA paper
90-3073, AIAA Applied Aerodynamics Conference, Portland, OR, Aug.
20-22, 1990, pp. 840-845.
- Accelerated
Computation of
Viscous Incompressible Flows With Heat Transfer (with S. Lee), First
International Conference on Experimental and Computational
Aerothermodynamics of Internal Flows, Editor: Chen, N.-X. and Jiang,
H.-D., Beijing, P.R. China, July 7-11, 1990, pp. 25-34.
- Shape Determination
Via
Optimization in Multiply Connected Domains, 3rd Annual Inverse Problems
in Engineering Seminar, Ed: J. V. Beck, Michigan State Univ., East
Lansing, MI, June 25-26, 1990. pp. 75-86.
- A Stream-Function-Coordinate
(SFC) Concept in Aerodynamic Shape Design, AGARD Specialist Workshop on
Inverse Methods for Airfoil Design for Aeronautical and Turbomachinery
Applications, AGARD-R-780, Editor: R. V. D. Braembussche, VKI,
Brussels, Belgium, May 14-18, 1990, pp. 6.1-6.6.
- Aerodynamic Shape
Design, AGARD
Specialist Workshop on Inverse Methods for Airfoil Design for
Aeronautical and Turbomachinery Applications, AGARD-R-780, Editor: R.
V. D. Braembussche, VKI, Brussels, Belgium, May 14-18, 1990, pp.
1.1-1.10.
- Distributed Minimal
Residual
(DMR) Method for Acceleration of Iterative Algorithms (with S. Lee),
CFD Symposium on Aeropropulsion, Editors: M.-S. Liou and L. I.
Povinelli, NASA Lewis Research Center, Cleveland, OH, April 24-26,
1990, NASA CP 3078, pp. 259-279.
- Computer Simulation
of
Convective Cooling Effectiveness Inside Turning Passages (with S. Lee),
16th Northeast Bioengineering Conference, Editor: R. Gaumont, Penn
State University, University Park, PA, March 26-27, 1990, pp. 27-28.
- A Fast Iterative
Algorithm for
Incompressible Navier-Stokes Equations, (with S. Lee), Proceedings of
10th Brazilian Congress of Mechanical Engineering, Editor: A. M. D. de
Figueiredo, Rio de Janeiro, Brazil, December 7-10, 1989, Vol. 1, pp.
193-195.
- An Active Control
System for
Thermal Fields in Hypothermic Processes (with C. Ambrose and L. J.
Hayes), National Heat Transfer Conference, Philadelphia, PA, Aug. 6-9,
1989, Editor: S. B. Yilmaz, AIChE Symposium Series 269, Vol. 85, pp.
440-405.
- Cryopreservation
Perfusion Flow
Simulation Using Navier-Stokes Equations (with S. Lee), CRYO '89
Cryobiology Society 26th Annual Meeting, Charleston, SC, June 11-16,
1989, Abstract no. 136.
- Physically Based
Artificial
Dissipation Concepts in Computational Fluid Dynamics, 7th International
Conference on Finite Elements in Flow Problems, Editor: T. J. Chung,
Huntsville, AL, April 3-7, 1989, pp. 1199-1204.
- Control of Interior
Cooling
Rates in Heterogeneous Materials by Varying, Surface Thermal Boundary
Conditions (with J. V. Madison and L. J. Hayes), 1st Pan-American
Congress of Applied Mechanics (PACAM), Editors: C. R. Steele and L.
Bevilacqua, Rio de Janeiro, Brazil, January 3-6, 1989, pp. 420-423.
- Control of Surface
Temperatures
to Optimize Survival in Cryopreservation, (with L. J. Hayes), ASME
WAM'88, Chicago, IL, Nov. 27 - Dec. 2. 1988, Symposium on Computational
Methods in Bioengineering, Editors: R. L. Spilker and B. R. Simon, ASME
BED -Vol. 9, pp. 255-265.
- Iterative
Acceleration and
Physically Based Dissipation for Euler Equations of Gasdynamics (with
D. J. Dorney and S. Lee), ASME WAM'88, Chicago, IL, Nov. 27 - Dec. 2.
1988, Symposium on Advances and Applications in Computational Fluid
Dynamics, Ed.,: O. Baysal, ASME FED - Vol. 66, pp. 81-92.
- Distributed Minimal
Residual
(DMR) Method for Explicit Algorithms Applied to Nonlinear Systems (with
S. Lee and D. J. Dorney), Conference on Iterative Methods for Large
Linear Systems, Editor: D. Kinkaid, Austin, TX, Oct. 19-21, 1988, pp.
13.
- A Cavitation Model
Based on
Gasdynamic Formulation, Conference on Hydraulic Machinery, Editor: B.
Velensek, Ljubljana, Yugoslavia, Sept. 13-15, 1988, pp. 353-360.
- Physically
Consistent Models
for Artificial Dissipation in Transonic Potential Flow Computations
(with K. W. Mortara and L. Marraffa), AIAA Paper 88-3653, First
National Fluid Dynamics Congress, Cincinnati, OH, July 24-28, 1988,
Volume I, pp. 280-287.
- Optimization of
Container Wall
Temperature Variation During Transplant Tissue Cooling (with J. V.
Madison and L. J. Hayes), International Conference on Inverse Design
Concepts and Optimization in Eng. Sciences (ICIDES-II), Editor: G. S.
Dulikravich, Penn State Univ., University Park, PA, Oct. 26-28, 1987,
pp. 321-336.
- Computations of
Unsteady
Dissociating Nitrogen Flows (with L. Marraffa and G. S. Deiwert), 7th
GAMM Conference on Numerical Methods in Fluid Mechanics,
Louvain-la-Neuve, Belgium, Sept. 9-11, 1987, Editor: M. Deville, in
Notes on Fluid Mechanics, Vieweg, Braunschweig, 1988, Vol. 20, pp.
211-218.
- Numerical Simulation
of
Two-Dimensional Viscous Unsteady Dissociating Nitrogen Flows (with L.
Marraffa and G. S. Deiwert), AIAA paper 87-2549-CP, AIAA 5th Applied
Aerodynamics Conference, Monterey, CA, Aug. 17-19, 1987.
- Acceleration of Explicit
Multi-Stepping Algorithms, First International Conference on Industrial
and Applied Mathematics, Paris, France, June 29-July 3, 1987, Book of
Abstracts, pp. 130.
- Inverse Design and Optimization
of Cryopreservation Procedures (with L. J. Hayes and T. L. Chiang), 2nd
ASME-JSME Thermal Engineering Joint Conference, Honolulu, Hawaii, March
22-27, 1987; ASME Book #I02195, pp. 525-529.
- Inverse Design of
Coolant Flow
Passages in Ceramically Coated Scram-Jet Combustor Struts (with T. L.
Chiang and L. J. Hayes), ASME WAM'86, Symposium on Numerical Methods in
Heat Transfer, Editors: Chen and K. Vafai, Anaheim, CA, Dec. 1986, ASME
HTD-Vol. 62, pp. 1-6.
- A Comparison of Grid
Generation
Techniques (with S. R. Kennon), INFOMART-ACM/IEEE Computer Society 1986
Fall Joint Computer Conference, Editors: H. S. Stone and S. Winkler,
Dallas, TX, Nov. 2-6, 1986, pp. 568-575.
- Acceleration Methods for
Iterative Algorithms (with C. Y. Huang and S. R. Kennon), First World
Congress on Computational Mechanics, Austin, TX, Sept. 22-26, 1986.
- Composite
Computational Grid
Generation Using Optimization (with S. R. Kennon), First International
Conference on Numerical Grid Generation in Computational Fluid
Dynamics, Editors: J. Haeuser and C. Taylor, Landshut, W. Germany, July
14-17, 1986, pp. 217- 226.
- Analysis of Unsteady
Compressible Cascade Flows Using Boundary Element and Free-Vortex
Method (with T. Fujinami), 6th International Symposium on Finite
Element Methods in Flow Problems, Antibes, France, June 16-20, 1986,
pp. 131-136.
- Free-Vortex Method
Simulation
of Unsteady Airfoil/Vortex Interaction (with T. Fujinami and A.
Hassan), AIAA 4th Applied Aerodynamics Conference, San Diego, CA, June
9-12, 1986, pp. 189-196.
- Generation of
Optimum
Three-Dimensional Computational Grids (with R. Carcaillet and S. R.
Kennon), 6th GAMM Conference on Numerical Methods in Fluid Mechanics,
Editors: D. Rues and W. Kordulla, Goettingen, Germany, Sept. 25-27,
1985, pp. 39-46.
- Inverse Design of
Multiholed
Internally Cooled Turbine Blades (with S. R. Kennon), International
Conference on Inverse Design Concepts in Engineering Sciences
(ICIDES-I), Editor: G. S. Dulikravich, Austin, TX, October 17-18, 1984,
pp. 217-240.
- Efficient
Turbomachinery Grid
Generation Using Traupel's Conformal Mapping (with S. R. Kennon), 1983
ASME Applied Mechanics, Bioengineering and Fluids Conference, Symposium
on Advances in Grid Generation, Houston, TX, June 20-22, 1983, Editors:
K. N. Ghia and U. Ghia, ASME FED-Vol. 5, 1983, pp. 199-204.
- Artificial Mass
Concept and
Transonic Viscous Flow Equation (with P. Niederdrenk), First Army
Conference on Applied Mathematics and Computing, Washington, D.C., May
9-11, 1983, pp. 259-268.
- Fast Generation of
Three-Dimensional Computational Boundary Conforming Periodic Grids of
C-type, in Numerical Grid Generation, Editor: J. F. Thompson, North
Holland Publishers, The Netherlands, 1982, pp. 563-584.
- Numerical Calculation of
Transonic Axial Turbomachinery Flows, Lecture Notes in Physics, Vol.
141, Springer-Verlag, 1981, pp. 164-169.
- Fast Generation of
Body
Conforming Grids for 3-D Axial Turbomachinery Flow Calculation,
Workshop on Numerical Grid Generation Techniques for Partial
Differential Equations, NASA Langley, Hampton, VA, Oct. 6-7, 1980, NASA
CP-2166, 1980, AIAA paper 80-0605, pp. 241-252.
- Numerical
Calculation of Steady
Inviscid Full Potential Compressible Flow About Wind Turbine Blades,
AIAA/SERI Wind Energy Conference, Boulder, CO, April 9-11, 1980, pp.
14-19.
INDIVIDUAL
TECHNICAL PAPERS NOT IN BOUND PROCEEDINGS (REFEREED)
- Optimization Approaches for
Contamination Event Identification (with Baun, S. A. and Bagtzoglou, A.
C.), Second International Conference on Advanced Technologies for
Homeland Security, University of Connecticut, Storrs, CT, August 12-13,
2004.
- Simultaneous
Prediction of
External Flow-Field and Temperature in Internally Cooled 3-D Turbine
Blade Material (Z.-X. Han and B. H. Dennis), ASME Turbo-Expo-2000,
Munich, Germany, May 8-11, 2000, ASME paper 2000-GT-0253.
- Optimization of
Multistage
Turbines Using a Through-flow Code (with Petrovic, M. V. and Martin, T.
J.), ASME Turbo-Expo-2000, Munich, Germany, May 8-11, 2000, ASME paper
2000-GT-0521.
- Constrained Shape
Optimization of
Airfoil Cascades Using a Navier-Stokes Solver and a Genetic/SQP
Algorithm (with B. H. Dennis and Z.-X. Han), ASME paper 99-GT-441, ASME
Turbo Expo, Indianapolis, IN, June 7-10, 1999.
- Minimization of
Coolant Mass Flow
Rate in Internally Cooled Gas Turbine Blades (with T. J. Martin, Z.-X.
Han and B. H. Dennis), ASME paper 99-GT-146, ASME Turbo Expo,
Indianapolis, IN, June 7-10, 1999.
- Maximizing Multistage
Turbine
Efficiency by Optimizing Hub and Shroud Shapes and Inlet and Exit
Conditions of Each Blade Row (with M. V. Petrovic and T. J. Martin),
ASME paper 99-GT-071, ASME Turbo Expo, Indianapolis, IN, June 7-10,
1999.
- Aerodynamic Shape
Inverse Design
Using a Fourier Series Method (with D. P. Baker), AIAA Aerospace
Sciences Meeting, Reno, NV, January 11-14, 1999, AIAA paper 99-0185.
- Three-Dimensional
Aerodynamic
Shape Optimization Using Genetic Evolution and Gradient Search
Algorithms (with N. F. Foster and J. Bowles), AIAA paper 96-0555, AIAA
Aerospace Sciences Meeting, Reno, NV, January 15-19, 1996.
- Shape Inverse Design
and
Optimization for Three-Dimensional Aerodynamics, Invited Lecture, AIAA
paper 95-0695, AIAA Aerospace Sciences Meeting, Reno, NV, January 9-12,
1995.
- A Numerical Method
for Solving
Cascades Inverse Problems Using Navier-Stokes Equations (with Z.-M.
Wang), AIAA paper 95-0304, AIAA Aerospace Sciences Meeting, Reno, NV,
January 9-12, 1995.
- Three-Dimensional
Coolant
Passage Design for Specified Temperatures and Heat Fluxes (with T. J.
Martin), AIAA paper 94-0348, AIAA Aerospace Sciences Meeting, Reno, NV,
January 10-13, 1994.
- Constrained
Optimization of
Three Dimensional Hypersonic Vehicle Configurations (with S. G.
Sheffer), AIAA Paper 93-0039, Reno, NV, January 11-14, 1993.
- Three-Dimensional
Solidification
With Magnetic Fields and Reduced Gravity (with S. Lee and V. Ahuja),
AIAA paper 93-0912, Reno, NV, January 11-14, 1993.
- Solidification of
Variable
Property Melts Under the Influence of Low Gravity, Magnetic Fields and
Electric Fields (with B. Kosovic), AIAA paper 92-0694, AIAA Aerospace
Sciences Meeting, Reno, NV, Jan. 6-9, 1992.
- Electrohydrodynamic
(EHD) Flow
Modeling and Computations (with S. Lee and B. Kosovic), AIAA paper
91-1469, AIAA Fluid Plasma Dynamics and Lasers Conference, Honolulu,
Hawaii, June 24-26, 1991.
- Minimization of the
Number of
Cooling Holes in Internally Cooled Turbine Blades (with B. Kosovic),
ASME paper 91-GT-101, ASME International Gas Turbine Conference,
Orlando, FL, June 3-6, 1991.
- Aerodynamic Shape
Design Using
Stream-Function-Coordinate (SFC) Formulation, AIAA paper 91-0189,
Aerospace Sciences Meeting, Reno, NV, Jan. 7-10, 1991.
- Aerodynamic Shape
Design and
Optimization, AIAA paper 91-0476, Aerospace Sciences Meeting, Reno, NV,
Jan. 7-10, 1991.
- Magnetohydrodynamic
Flow
Computations in Three Dimensions (with S. Lee), AIAA Paper 91-0388,
Aerospace Scienes Meeting, Reno, NV, Jan. 7-10, 1991.
- Performance Analysis
of DMR
Method for Acceleration of Iterative Algorithms (with S. Lee), AIAA
paper 91-0241, Aerospace Sciences Meeting, Reno, NV, Jan. 7-10, 1991.
- A Criteria for
Surface Velocity
Specification in Aerodynamic Shape Design, AIAA paper 90-0124, AIAA
Aerospace Sciences Meeting, Reno, NV, Jan. 8-11, 1990.
- Accelerated
Computation of
Viscous, Steady, Incompressible Flows (with S. Lee), ASME paper
89-GT-45, ASME International Gas Turbine Conference, Toronto, Canada,
June 4-8, 1989.
- Artificial
Dissipation Sensors
for Computational Gasdynamics (with D. J. Dorney), AIAA paper 89-0643,
AIAA Aerospace Sciences Meeting, Reno, NV, January 8-12, 1989.
- Numerical Versus
Physical
Dissipation in the Solution of Compressible Navier-Stokes Equations
(with D. J. Dorney and S. Lee), AIAA paper 89-0550, AIAA Aerospace
Sciences Meeting, Reno, NV, January 8-12, 1989.
- Acceleration of
Iterative
Algorithms for Euler Equations of Gasdynamics (with S. Lee and D. J.
Dorney), AIAA paper 89-0097, AIAA Aerospace Sciences Meeting, Reno, NV,
January 8-12, 1989.
- A Comparative Study
of Iterative
Algorithms for the Euler Equations of Gasdynamics (with D. J. Dorney
and K. Lee), AIAA paper 89-0114, AIAA Aerospace Sciences Meeting, Reno,
NV, January 8-12, 1989.
- A Survey of the
Reaction Rate
Constants for the Thermal Dissociation and Recombination of Nitrogen
and Oxygen (with L. Marraffa, T. C. Keeney, and G. S. Deiwert), AIAA
Paper 88-0754, AIAA Aerospace Sciences Meeting, Reno, NV, Jan. 12-15,
1988.
- Analysis of Numerical
Dissipation Models for Transonic Full Potential Equations, AIAA paper
88-0711, AIAA Aerospace Sciences Meeting, Reno, NV, Jan. 12-15, 1988.
- Theory of Unsteady
Compressible
Irrotational Flows Including Heat Conductivity and Longitudinal
Viscosity (with S. R. Kennon), AIAA paper 88-0709, AIAA Aerospace
Sciences Meeting, Reno, NV, Jan. 12-15, 1988.
- A Hodograph-Based
Method for the
Design of Shock-Free Cascades (with A. Hassan), AIAA paper 87-0606,
AIAA 30th Aerospace Sciences Meeting, Reno, NV, January 12-15, 1987.
- Viscous/Inviscid
Computations of
Transonic Separated Flows Over Solid and Porous Cascades (with C. R.
Olling), ASME Paper 86-GT-235, 31st ASME Gas Turbine Conference,
Dusseldorf, W. Germany, June 9-12, 1986.
- Inverse Design of
Composite
Turbine Blade Circular Coolant Flow Passages (with T. L. Chiang), ASME
Paper 86-GT-190, 31st ASME Gas Turbine Conference, Dusseldorf, W.
Germany, June 9-12, 1986.
- Polynomial
Elimination Theory
and Non-Linear Stability Analysis for the Euler Equations (with S. R.
Kennon and D. C. Jespersen), AIAA Paper 86-0554, AIAA 29th Aerospace
Sciences Meeting, Reno, Nevada, January 6-9, 1986.
- Inverse Design of
Coolant Flow
Passage Shapes with Partially Fixed Internal Geometries (with S. R.
Kennon), ASME Paper 85-GT-118, 30th ASME International Gas Turbine
Conference, Houston, TX, March 17-21, 1985.
- A Posteriori
Optimization of
Computational Grids (with S. R. Kennon), AIAA Paper No. 85-0483, AIAA
23rd Aerospace Sciences Meeting, Reno, Nevada, January 14-17, 1985.
- Common Misconceptions
in the
Computations of Transonic Potential Flows, ASME Paper No. 84-GT-211,
20th ASME International Gas Turbine Conference, Amsterdam, The
Netherlands, June 3-7, 1984.
- Supercritical Cascade
Flow
Analysis with Shock-Boundary Layer Interaction (with P. Niederdrenk and
H. Sobieczky), AIAA Paper No. 83-1752, AIAA 16th Fluid and Plasma
Dynamics Conf., Denvers, MA, July 12-24, 1983.
- Design of Shock-Free
Compressor
Cascades Including Viscous Boundary Layer Effects (with H. Sobieczky),
ASME Paper No. 83-GT-134, 28th International Gas Turbine Conf.,
Phoenix, AZ, March 27-31, 1983.
- A Computational
Design Method
for Transonic Turbomachinery Cascades (with H. Sobieczky), ASME Paper
No. 82-GT-117, 27th International Gas Turbine Conference, London, Great
Britain, April 18-22, 1982.
TECHNICAL
REPORTS
- Parameterized
Aerospace Vehicles
for Aerothermodynamic Optimization (with H. Sobieczky), DLR-Technical
Note H95F-12.93, Goettingen, Germany, December 1993.
- A Physically
Consistent Model for
Artificial Dissipation in Transonic Potential Flow Computations (with
K. Mortara and L. Marraffa), NASA TM 100846, ICOMP-88-6, May 1988.
- CFD02-FORTRAN Program
for
Accurate Analysis of Steady Compressible Airfoil and Cascade Flows
Using High Order Surface Panel Method (with T. Fujinami), Computational
Fluid Dynamics Group, Report UTCFD200-85, Department of Aerospace
Engineering and Engineering Mechanics, The University of Texas at
Austin, December 1985.
- GSD28-FORTRAN Program
for
Analysis and Design of Shock-Free Transonic Airfoils and Turbomachinery
Cascades Including Viscous/Inviscid Interaction (with C. R. Olling),
Computational Fluid Dynamics Group, Report UTCFD, 100-85, Department of
Aerospace Engineering and Engineering Mechanics, The University of
Texas at Austin, September 1985.
- WBCTG31-FORTRAN
Program for
Efficient Three-dimensional Computational Grid Generation for
Wing-Body-Canard-Tail Realistic Aircraft Configurations (with D. M.
Sommerfield), Fluid Dynamics Group of the Bureau of Engineering
Research Report No. 84-100, The University of Texas at Austin,
Department of Aerospace Engineering and Engineering Mechanics, November
1984.
- Artificial Mass Concept and
Transonic Viscous Flow Equation (with P. Niederdrenk), ARO Report 84-1,
Jan. 1984.
- GRID3C-Computer
Program for
Generation of C-Type Multilevel, Three-Dimensional, Boundary Conforming
Periodic Grids, NASA CR 167846, March 1982.
- Fast Generation of
Three-Dimensional Computational Boundary Conforming Periodic Grids of
C-type, NASA CR 165596, June 1982.
- CAS22-FORTRAN Program
for Fast
Design and Analysis of Shock Free Airfoil Cascades (with H. Sobieczky),
NASA CR 3507, January 1982.
- GRID30-Computer
Program for
Generation of Multilevel, Three-Dimensional, O-type Boundary Conforming
Computational Grids, NASA TP 1920, September 1981.
- Shockless Design and
Analysis of
Transonic Blade Shapes (with H. Sobieczky), NASA TM 82611, June 1981.
- Numerical Calculation
of
Transonic Axial Turbomachinery Flows, NASA TM 81544, June 1980.
- WIND-Computer Program
for
Calculation of Three-Dimensional Potential, Compressible Flow About
Wind Turbine Rotor Blades, NASA TP 1729, October 1980.
- CAS2D-FORTRAN Program
for
Nonrotating, Blade-to-Blade, Steady, Potential Transonic Cascade Flows,
NASA TP 1705, July 1980.
- Numerical Calculation
of Steady
Inviscid Full Potential Compressible Flow About Wind Turbine Blades,
NASA TM 81438, April 1980.
- Finite Volume
Calculation of
Transonic Potential Flow Through Rotors and Fans (with D. A. Caughey),
FDA-80-03 Report, Mech. and Aerospace Eng. Dept., Cornell University,
March 1980.
PUBLISHED
BOOK REVIEWS
- Magnetofluddynamics in Channels
and Containers (by U. Mueller and L. Buehler), Sringer-Verlag, Berlin,
2001, 210 pp, Applied Mechanics Reviews, Vol. 55, no. 1, January 2002,
pp. B14.
- A History of Aerodynamics and
Impact on Flying Machines (by John D. Anderson, Jr.), McGraw Hill,
1998, 496 pp., Applied Mechanics Reviews, Vol. 51, no. 7, July 1998,
pp. B61-B62.
- Computational Grids: Generation,
Adaptation, and Solution Strategies (by G. F. Carey), Taylor &
Francis, Bristol, PA 1997, 496 pp., Applied Mechanics Reviews, Vol. 51,
no. 3, March 1998, pp. B23.
- Molecular Gas Dynamics and the
Direct Simulation of Gas Flows (by G. A. Bird), Oxford Engineering
Science Series, Vol. 42, New York, 458 pp., Applied Mechanics Reviews,
Vol. 49, no. 4, April 1996, pp. B49-B50.
- Numerical Solution of Partial
Differential Equations (by K. W. Morton and D. F. Mayers), Cambridge
UP, NY, 1994, 227 pp., Applied Mechanics Reviews, Vol. 48, No. 9,
September 1995, pp. B122.
- Computational Methods in Physics
and Engineering (by S. S. M. Wong), Prentice-Hall, NJ, 1992, 677 pp.,
Applied Mechanics Reviews, Vol. 46, No. 5, May 1993, pp. B69.
- Heat Conduction Using Green's
Function (by J. V. Beck, K. D. Cole, A. Haji-Sheikh, B, Lithouki),
Hemisphere, NY, 1992, 523 pp., Applied Mechanics Reviews, Vol. 45, No.
9, September 1992, pp. B128-B129.
- Boundary Element Methods for
Two-Dimensional Contact Problems (by G. Karami), Springer, NY, 1989,
243 pp., Applied Mechanics Reviews, Vol. 43, No. 6, June 1990, pp. B129.
- Boundary Elements (by C. A.
Brebbia and J. Dominguez), McGraw-Hill, NY, 1989, 292 pp., Applied
Mechanics Reviews, Vol. 42, No. 7, July 1989, pp. B113.
- Engineering Fluid Mechanics, 3rd
ed. with separate solutions manual (by J. A. Roberson and C. T. Crowe),
Houghton Mifflin, Boston, MA, 1985, 979 pp., Applied Mechanics Reviews,
Vol. 39, No. 7, July 1986, pp. 1035.
- Compressible Fluid Flow (by M.
A. Saad), Prentice-Hall, Englewood Cliffs, NJ, 1985, 560 pp., Applied
Mechanics Reviews, Vol. 38, No. 12, December 1985, pp. 1661.
- Fundamentals of Gas Turbine
Engines (by W. W. Bathie), Wiley, NY, 1984, 385 pp., Applied Mechanics
Reviews, Vol. 38, No. 3, Sec. 1, March 1985, pp. 276-277.
- A Mathematical Method for Design
of Turbine Blade Cascades for Small Subsonic Mach Numbers (by M.
Ruzicka and L. Spacek), Monographs and Memoranda no. 29, Nat. Research
Institute for Machine Design, Bechovice, Czechoslovakia, 1981, 121 pp.,
Applied Mechanics Reviews, Vol. 36, No. 1, Jan. 1983, pp. 121-122.
OTHER
TECHNICAL PUBLICATIONS
- Inverse Design Methods in
Internal Fluid Mechanics, Lecture Notes written by G. S. Dulikravich
for a one-day course delivered at the United Technologies Research
Center (UTECA/NMT), Hartford, CT, March 1988.
- Hydraulics and Fluid Mechanics
Research at Ecole Polytechnique Federal de Lausanne (with E. F. Brown),
ONR ESNIB 87-02, pp. 59-61.
- The Aerodynamic Inverse Problem,
ASE/EM Department Lecture Notes No. 83-02 written by W. Chin (edited by
G.S. Dulikravich), Dec. 1983.
- Design Aspects of Transonic
Aerodynamics, ASE/EM Department Lecture Notes No. 83-01 written by H.
Sobieczky (edited by G. S. Dulikravich), Sept. 1983.
|
| |
| |
|
|
|
|
